Cold Shrink Tube Suppliers and Manufacturers

Telsto Cold Shrink EPDM Tubes equal to cold shrink 8420 and 8430 series A series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in-line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. Features 1. Simple installation 2. No tool or heat required. 3. Seals tight, retains its resiliency and pressure even after years of aging and exposure. 4. Resists moisture. 5. Wide range, size accommodation. 6. Resists acids and alkalies. 7. Resists ozone and ultraviolet light. 8. Resists fluid splashes. 9. Resists fire - will not support flame.

Telsto Cold Shrink Splice Cover Kits are designed to be an easy-to-install, safe and fast method of covering splices on Spacer Cable. The tubes are open-ended rubber sleeves which are factory-expanded and assembled onto removable plastic cores. After the tube has been positioned for installation over an in-line splice, the core is removed, thus allowing the tube to shrink and seal the splice.

Place of Origin: China The cold shrink cable accessories are made of imported Liquid silicon rubber Material. They not only have excellent electric performance, but also excellent physical performance, such as high elasticity, a long life span and constant shrink pressure, and they don't need a flame or special tools for heating. It's very easy to install it. Features: 1) For 1-core or 3-cores XLPE 2) Cable section area from 25-500mmsqmm 3)Produce as many size as the customer demands 4)High expansion ratio Plastic and paper box

SUNBOW silicone cold shrink tube has been used in 5G base stations, installation is twice as fast as peers For the big market of 5G base stations, although many silicone cold shrink tube manufacturers continue to increase research and development efforts, few manufacturers can really install silicone cold shrink tubes quickly. It is very confident to say that SUNBOW silicone cold shrink tube is currently the only product in China that can be quickly installed, and it is twice as fast as its counterparts. The vast majority of silicone cold shrink tubes made in domestic factories have practically no difference in performance. Because silicone cold shrink tubes are made of special silicone rubber materials, the only difference is the installation problem. The silicone cold shrink tubes manufactured by more than 80% of the factories are as follows: 1. Need to push the cold shrink tube to the root of the joint as much as possible, and start to carefully pull out the support bar; 2. Push the cold shrink sleeve towards the root of the joint while pulling the support core rope, and observe at the same time until the cold shrink sleeve is firmly contracted at the joint root of the joint; 3. Do not push, pull or shake the cold shrink sleeve afterwards, otherwise the shrinkage may not be firm or damaged; 4. If the drawing is not smooth, do not force it, you should complete the installation of other cold shrink sleeves. The matters needing attention during installation are as follows: 1. It is strictly forbidden to wrap the cold shrink sleeve when it is installed, otherwise it will easily cause the water inlet and waterproof failure; 2. Use a wrench to tighten the adjacent connector where the shrink sleeve joint is installed, otherwise it will cause damage to the shrink sleeve. SUNBOW understands that users spend a lot of energy and time when installing the silicone cold shrink tube, so they developed a silicone cold shrink tube that simplifies the installation. You only need to pull the silicone cold shrink tube to support the entire installation process. The installation time is twice as fast as its counterparts, and there will be no installation errors caused by functional aging or damage.

RUNLIN Cold Shrink tubing for GSM/4G/5G communication base station is a series of insulated rubber sleeves which are factory expanded and assembled onto a removable core. The cold shrink tubing are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over a cable connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. It is made of Silicone rubber material, which have excellent weather resistance, acid and alkali resistance. The cold shrink tubing is ideal sealing material for the communication cable, coaxial cable, medium voltage and low voltage power cables. Compared with heat shrink tubing, it is not hard and brittle even if used for a long time, and it also can be tight seal and no crack in the case of Cold shrinkage and thermal expansion. It can be used in more harsh environments. RUNLIN Cold Shrink Tubing Advantage: Good performance for sealing and insulating; Waterproof, moistureproof, dustproof; Suit for a wide range of cable size, for indoor and outdoor applications; Simple and fast installation. RUNLIN Cold Shrink Tubing Application: 1. Used in 4G communications base station such as cell tower and terminals, connectors, antenna. 2. Used in the protection of medium voltage and low voltage power cables and sealing for communication cable and optical cable. 3. Waterproof and moistureproof for the joint and terminal of cable, optical cable. 4. Insulation of secondary splices, copper or aluminum conductors.Used in indoor and outdoor, overhead and underground, etc. 5. Applied to the tool handle, pipe repair or other types of seals, etc.

Silicon cold shrink tube: It is widely used for waterproof seal in coaxial cables on telecommunication base stations, N-type connector, 1/2 jumper, Din head and 1/2 jumper connector. It can be used as a waterproof seal for cable television connector, connecting wires and cables, Insulation seal for other types of connection.

EPDM cold shrink tube: applied in electrical power industry, telecommunication industry or other tool product handle, eg. bicycle handle etc. With its good performance: water-proof, Acid and alkali resistance, seal, protection sleeve and low voltage seal insulation under 1kv. We provide OEM service.

Cold shrink tube open-ended, tubular, rubber tube which are factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc., allowing the tube to shrink and form a water-resistant seal. The tube is made of silicone rubber which contains no chlorides or sulfurs.

Silicone cold shrink tube: It is widely used for waterproof seal in coaxial cables on telecommunication base stations, N-type connector, 1/2 jumper, Din head and 1/2 jumper connector. It can be used as a waterproof seal for cable television connector, connecting wires and cables, Insulation seal for other types of connection. Silicone Cold Shrink Tube Selection Table

Textile bag expansion machine for cold shrink cable accessories Applicable scope Machine is applied for expanding cold shrink rubber products, such as: telecommunication cold shrink tube, electrical power insulation straight tube, seal tube, low/middle voltage middle joint, indoor/outdoor cable terminations.

1. Manufactured from silicone rubber. 2. Offering good mechanical,insulation and sealing protection. 3. Accommodating a wide range of cable sizes. 4. For indoor or outdoor applications. 5. Simple and fast installation. 6. Color: Grey, black,ect.

Wide application: Every product which has compatibility can fit many kinds of cable Outstanding performance: 1) Being made of advanced improved liquid silicone rubber material 2) Enhanced track-resistant characteristics 3) Excellent radiativity resistant 4) Hydrophobic and hydrophilic surface properties 5) Excellent dielectric characteristics 6) Broad temperature rang: from-50 to 200C 7) Longtime quantity conserve period Products include: 1) Low (1-15kV) , middle and high (20-35kV) voltage terminations and joints 2) One and three cores 3) Outdoor and indoor 4) Cable conduct cross section: 50-500mm2 plastic and paper box

Flexible, fast shrinking Non slip, nice-looking, user-friendly Min shrink temperature:60 Min full recovery temperature:105 Continuous operating temperature:-55~110 Shrink ratios:2:1 Rohs compliant Standard color:black, red, yellow, green, blue

Silicone cold shrink tubes.

Silicone cold shrink tubes.

Hydraulic Cylinder and Cold Shrink Tube.