Cold Shrink Tube

SUNBOW silicone cold shrink tube has been used in 5G base stations, installation is twice as fast as peers For the big market of 5G base stations, although many silicone cold shrink tube manufacturers continue to increase research and development efforts, few manufacturers can really install silicone cold shrink tubes quickly. It is very confident to say that SUNBOW silicone cold shrink tube is currently the only product in China that can be quickly installed, and it is twice as fast as its counterparts. The vast majority of silicone cold shrink tubes made in domestic factories have practically no difference in performance. Because silicone cold shrink tubes are made of special silicone rubber materials, the only difference is the installation problem. The silicone cold shrink tubes manufactured by more than 80% of the factories are as follows: 1. Need to push the cold shrink tube to the root of the joint as much as possible, and start to carefully pull out the support bar; 2. Push the cold shrink sleeve towards the root of the joint while pulling the support core rope, and observe at the same time until the cold shrink sleeve is firmly contracted at the joint root of the joint; 3. Do not push, pull or shake the cold shrink sleeve afterwards, otherwise the shrinkage may not be firm or damaged; 4. If the drawing is not smooth, do not force it, you should complete the installation of other cold shrink sleeves. The matters needing attention during installation are as follows: 1. It is strictly forbidden to wrap the cold shrink sleeve when it is installed, otherwise it will easily cause the water inlet and waterproof failure; 2. Use a wrench to tighten the adjacent connector where the shrink sleeve joint is installed, otherwise it will cause damage to the shrink sleeve. SUNBOW understands that users spend a lot of energy and time when installing the silicone cold shrink tube, so they developed a silicone cold shrink tube that simplifies the installation. You only need to pull the silicone cold shrink tube to support the entire installation process. The installation time is twice as fast as its counterparts, and there will be no installation errors caused by functional aging or damage.

Cold shrink tube open-ended, tubular, rubber tube which are factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc., allowing the tube to shrink and form a water-resistant seal. The tube is made of silicone rubber which contains no chlorides or sulfurs.

1. Manufactured from silicone rubber. 2. Offering good mechanical,insulation and sealing protection. 3. Accommodating a wide range of cable sizes. 4. For indoor or outdoor applications. 5. Simple and fast installation. 6. Color: Grey, black,ect.

Wide application: Every product which has compatibility can fit many kinds of cable Outstanding performance: 1) Being made of advanced improved liquid silicone rubber material 2) Enhanced track-resistant characteristics 3) Excellent radiativity resistant 4) Hydrophobic and hydrophilic surface properties 5) Excellent dielectric characteristics 6) Broad temperature rang: from-50 to 200C 7) Longtime quantity conserve period Products include: 1) Low (1-15kV) , middle and high (20-35kV) voltage terminations and joints 2) One and three cores 3) Outdoor and indoor 4) Cable conduct cross section: 50-500mm2 plastic and paper box

Supplier: LV & MV & HV cable accessories, heat shrink tubes, cold shrink tubes, heat cold shrink moulded shapes, separable connectors and kits
Buyer: Silicone rubber

Supplier: Heat shrink tube, cold shrink tube, cable markers, silicone tube, teflon tube

Products Information: FEP heat shrink tube,maximum continuous working temperature is 200°C, the shrinking temperature is only 110°C.Used initially for UV lamps in electronic fly killers, and subsequently for white lights, FEP has proved to be the ultimate coating material for shatterproofing lamps for this application. It allows glass and mercury to be safely contained when breakage occurs, yet does not become degraded by the heat or UV emitted by the lamps. FORBEST FEP safety coated shatterproof lamps are used where a glass free area is required: Schools and Colleges Public spaces Hotels and Restaurants Warehousing and storage Food processing plants Food preparation and display areas Supermarkets Bakeries Pharmaceutical plants Medical centres, Dentists and hospitals Leisure centres and swimming pools Agricultural Industry Stables and Liveries Standard lamp sizes: T5, T8, T10 and T12 - UVA, UVC and Triphosphur Compact U type (Linx, PLL) Circline

Products Infomation: Heat-shrinkable silicone rubber tubing. The inner diameter shrinks by about 50% simply by heating. Heat shrinkable silicone rubber tubing are used for insulation, protection, and sheathing applications. These rubber tubings have superior heat and cold resistance, flexibility, and electrical insulative properties. They typically maintain their performance characteristics over a wide temperature range, from -50°C to +200°C. Our heat-shrinkable tubing shrinks quickly by heating, and even complex shapes can be sheathed, thereby saving labor in the work process. They exhibit stable electrical properties even in the harshest conditions. Usage : Mainly used in medical equipment, household electrical appliances, aerospace, military industry, automobile manufacturing, electronic components, transformers, motors, etc.

Supplier: Disposable face mask, 3 ply surgical mask, surgical masks, disposable medical face mask, particle masks n95 and surgical masks, rubber gloves, butyl tube, tyre inner tube, natural rubber tube, butyl inner tube, natural inner tube, flaps, tyre flaps, flap, tyre repair patch, tyre patch, cold patch, rubber patch, rubber cold patch, tyre rubber patch, shiitake, shiitake mushroom, canned shiitake mushroom, canned shiitake, dry shiitake mushroom, shiitake mushroom from xixia