SUNBOW silicone cold shrink tube has been used in 5G base stations, installation is twice as fast as peers For the big market of 5G base stations, although many silicone cold shrink tube manufacturers continue to increase research and development efforts, few manufacturers can really install silicone cold shrink tubes quickly. It is very confident to say that SUNBOW silicone cold shrink tube is currently the only product in China that can be quickly installed, and it is twice as fast as its counterparts. The vast majority of silicone cold shrink tubes made in domestic factories have practically no difference in performance. Because silicone cold shrink tubes are made of special silicone rubber materials, the only difference is the installation problem. The silicone cold shrink tubes manufactured by more than 80% of the factories are as follows: 1. Need to push the cold shrink tube to the root of the joint as much as possible, and start to carefully pull out the support bar; 2. Push the cold shrink sleeve towards the root of the joint while pulling the support core rope, and observe at the same time until the cold shrink sleeve is firmly contracted at the joint root of the joint; 3. Do not push, pull or shake the cold shrink sleeve afterwards, otherwise the shrinkage may not be firm or damaged; 4. If the drawing is not smooth, do not force it, you should complete the installation of other cold shrink sleeves. The matters needing attention during installation are as follows: 1. It is strictly forbidden to wrap the cold shrink sleeve when it is installed, otherwise it will easily cause the water inlet and waterproof failure; 2. Use a wrench to tighten the adjacent connector where the shrink sleeve joint is installed, otherwise it will cause damage to the shrink sleeve. SUNBOW understands that users spend a lot of energy and time when installing the silicone cold shrink tube, so they developed a silicone cold shrink tube that simplifies the installation. You only need to pull the silicone cold shrink tube to support the entire installation process. The installation time is twice as fast as its counterparts, and there will be no installation errors caused by functional aging or damage.