Supply of several non-ferrous cast alloys in the shape of ingots, The alloys available include:
1)Aluminum alloys
Pure A1 , Al- Si, Al-Mg , . etc.
2)Copper alloys
Pure Cu, Cu-Zn
3)Zn alloys
4)Pure Lead and lead alloys.
Specification of the supplied ingots.
1.Sizes in the range of :
Al65178 Cm
Cu4677 Cm
2.Weights:
Al12 Kg
Cu14 Kg
Zn10 Kg
Pb50 Kg
Moreover, alloys with specific chemical composition could be supplied according to the customer request.
SWC BH Roller Table Universal Coupling
Swc Ch Type Long Telescopic Welding Integral Fork Head Cross Shaft Universal Coupling Basic Parameters And Main Dimensions (GB5513-91)
Aluminum-zinc alloy casting
Category:Aluminum alloy casting
Aluminum-zinc alloy casting has good processing performance, and there are common grades such as AC1A and ZA43.
The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance.
The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance.
The aluminum-zinc alloy alloy has excellent processing performance, the overall comprehensive performance is close to that of lead brass, the surface treatment effect is good, and it has good electrical conductivity. It can be widely used in electronic and electrical industries. The lower one is added, and it is an environmentally friendly material, which can meet most environmental protection requirements.
Low temperature alloy casting
Category Titanium alloy casting
Low temperature alloy casting can be used as an important material for the low-temperature structure of hydrogen-oxygen engines. Common grades are TC4 etc.
Product Description
Low temperature alloy casting can show stronger mechanical properties at low temperature.At present, it has been used in the field of liquid rocket engines, mainly as structural materials such as hydrogen storage tanks for hydrogen-oxygen engines, hydrogen pump impellers, etc., which greatly improves the comprehensive performance of liquid rocket engines.
Low-temperature titanium alloys refer to titanium alloys that can work normally under low temperature conditions. They are generally divided into three categories, alpha titanium alloys, beta titanium alloys and alpha-beta titanium alloys. Typical low-temperature titanium alloy products are suitable for working at 253C as a storage container for liquid fuel, and some alloys have good low-temperature plasticity and fracture toughness.
The strength of low-temperature titanium alloys can be increased as the temperature decreases, and the toughness remains basically unchanged, making it easy to weld. It has high specific strength, corrosion resistance and low thermal conductivity. It can not only be used as a storage container for low-temperature objects, but also can be used as low-temperature structural parts for the aerospace industry
Category:Aluminum alloy casting
Cast aluminu-silicon alloys is a process in which aluminum-silicon alloys are processed into products that can be directly used through a casting process. Common grades are A356.0, A413.0 and so on.
Cast aluminu-silicon alloys is a very important industrial alloy. It has important uses in the automobile manufacturing industry, high-tech electronics industry, aerospace materials and other products, and is an ideal wear-resistant material.
Aluminum silicon alloy may be a reasonably ferroalloy with aluminum and silicon because the main components. Generally, the content of silicon is 11 and atiny low amount of copper, iron and nickel are added to enhance the strength.Aluminum silicon alloy is employed to manufacture low and medium strength castings with complex shapes, like covering, motor shell, bracket, etc. it's also used as brazing solder.
When the silicon content is low (such as 0.7), the ductility of aluminum silicon alloy is sweet, which is usually used as deformation alloy.
When the silicon content is high (such as 7%), the filling property of aluminum silicon alloy melt is nice, which is usually used as casting alloy.
In the Al Si alloy with silicon content exceeding Al Si eutectic point (silicon 12.6%), when the particle content of silicon is as high as 14.5% 25%, adding a specific amount of Ni, Cu, Mg and other elements can improve its comprehensive mechanical .
CLZ type gear coupling is suitable for connecting two horizontal coaxial drive shafting. It has a certain ability to compensate the relative offset of two shafts, and transmits nominal torque 0. 71 -- 1000KN
CLZ type tooth coupling basic parameters and main dimensions
Model Nominal Torque Tn
KN m Allowable speed[n] r/min Shaft hole diameter  d, dz Shaft hole  length  L
Y D D, d2 D3 C  Inertia  moment  kg m2 Weight  kg
CLZ1 0. 71 3780 18 40 (60) 40 42 170 110 55 95 2.5 0. 03 11.8
CLZ2 1.4 3000 30 50 (70) 82 142 185 125 70 110 2.5 0.06 16.6
CLZ3 3. 15 2400 40 60(90) 112 172 220 150 90 145 2.5 0.12 34.8
CLZ4 5.6 2000 45 75(100) 112 212 250 175 110 170 2.5 0. 22 47.8
CLZ5 8 1680 50 90(120) 112 212 290 200 130 190 5 0.44 67.3
CLZ6 11.2 1500 60 110(130) 142 252 320 230 140 210 5 0. 75 91
CLZ7 18 1270 65 120 (150) 142 252 350 260 170 240 5 1.25 125
CLZ8 23.6 1140 80 ã??140 (170) 172 ã??302 380 315 190 270 5 2.06 174
Cast aluminum-magnesium alloy
Category:Aluminum alloy casting
Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc.
The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness.
The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable.
Nickel-Based Precision Alloy Casting
Category:Nickel alloy casting
Nickel-Based Precision Alloy Casting includes nickel-based soft magnetic alloys, nickel-based precision resistance alloys and nickel-based electrothermal alloys. Common grades are N05500 etc.
Nickel-Based Precision Alloy Casting is commonly used in the electronics industry, resistors and other fields.In recent years, it has been widely used in the field of environmental protection and energy development, improving the comprehensive performance of the devices used.
Nickel-based alloy refers to an alloy with nickel as the basic element and still has high strength and certain oxidation corrosion resistance at high temperature of 650-1000 C. Nickel-based precision alloy is one of them, which includes nickel. Base soft magnetic alloy, nickel base precision resistance alloy, etc.
51275 Casting Alloy Suppliers
Short on time? Let Casting Alloy sellers contact you.
