Category:Aluminum alloy casting
Cast aluminu-silicon alloys is a process in which aluminum-silicon alloys are processed into products that can be directly used through a casting process. Common grades are A356.0, A413.0 and so on.
Cast aluminu-silicon alloys is a very important industrial alloy. It has important uses in the automobile manufacturing industry, high-tech electronics industry, aerospace materials and other products, and is an ideal wear-resistant material.
Aluminum silicon alloy may be a reasonably ferroalloy with aluminum and silicon because the main components. Generally, the content of silicon is 11 and atiny low amount of copper, iron and nickel are added to enhance the strength.Aluminum silicon alloy is employed to manufacture low and medium strength castings with complex shapes, like covering, motor shell, bracket, etc. it's also used as brazing solder.
When the silicon content is low (such as 0.7), the ductility of aluminum silicon alloy is sweet, which is usually used as deformation alloy.
When the silicon content is high (such as 7%), the filling property of aluminum silicon alloy melt is nice, which is usually used as casting alloy.
In the Al Si alloy with silicon content exceeding Al Si eutectic point (silicon 12.6%), when the particle content of silicon is as high as 14.5% 25%, adding a specific amount of Ni, Cu, Mg and other elements can improve its comprehensive mechanical .
Item: Aluminium Casting Billet Alloy: 2XXX(2A12, 2A14,2A50,2219), 5XXX(5A06,5A12, 5083), 6XXX(6061,6A02, 6082), 7XXX(7050, 7A52, 7A04) or as required Temper: Homogeneity Diameter: 166, 220, 380, 396, 448, 462, 566, 582, 915, 1060, 1220, 1320 mm Max Length: 7500mm(Dia.166mm~582 mm); 4500mm(Dia.915mm); 4000mm(Dia.1060mm /1220mm); 3500mm(Dia. 1320mm) Confrom To: ISO, OHSAS, GJB, CNAS, AS9100D, TS22163, IATF16949, Nadcap, ABS, DNV, BV, CCS, LR, CPR. Advantage: Large Size: the largest billet in the world, diameter up to 1320mm. Max Weight of the billet up to 12.5MT. High-Purity: low hydrogen, low dross, low alkali metal content inside the billet. Fine Grain Size Hydrogen Content Below 0.08ml/100gAI, Available. Porosity Class One, Available. Oxidation Film Class One, Available. Ultrasonic Flaw Detection Class A, Available.
Aluminum-zinc alloy casting Category:Aluminum alloy casting Aluminum-zinc alloy casting has good processing performance, and there are common grades such as AC1A and ZA43. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The aluminum-zinc alloy alloy has excellent processing performance, the overall comprehensive performance is close to that of lead brass, the surface treatment effect is good, and it has good electrical conductivity. It can be widely used in electronic and electrical industries. The lower one is added, and it is an environmentally friendly material, which can meet most environmental protection requirements.
Cast aluminum-magnesium alloy Category:Aluminum alloy casting Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc. The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness. The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable.
We have years experience of aluminum alloy casting, since we need to produce the corrugated pipe molding blocks for our PE/PVC corrugated pipe extrusion line which is our another main business started from 1980's. and now we produce aluminum casting pieces according to customer's requests and drawings with the same superior quality as our mold blocks for our extrusion line. The weight of casting pieces can range from 0.25kg to 1200kg. 1 Metal liquid is shaped solidly by the effect of pressure, which can raise the fluid of the metal liquid and ensure a better shape of the casting piece. This casting method is benefit to shape casting pieces with require of clear silhouette and glabrous surface, especially suitable for the casting of large pieces of thin wall. 2 The casting pieces is formed in pressure, so the shrink spot on the pieces can be filled adequately by the metal liquid. As a result, the casting pieces are made with dense texture and high mechanical performance. 3 The technical parameter of the low pressure casting can be adjusted freely within the technical range,which can ensure an even and smooth metal shape and avoid the defect of the casting piece for the purpose of improving the quality of the casting pieces.
Aluminum Alloy Connector Manufacturer: Aluminum Alloy A380 Die Casting Connector, no surface treatment, used to connect mechanical parts. Product: Connector. Material: Aluminum Alloy A380. Processing: Die Casting. Surface Treatment: no. Application: used to connect mechanical parts. Payment Terms: L/C, T/T, M/T, D/D, D/P, D/A and others. Origin: Dongguan, Guangdong, China. Packaging Details: blister tray, carton, tray, container. Terms of Delivery: FOB, CFR, CIF, DAP, DAT and others.
Aluminum alloy part Material ADC12 Weight 0.9kg Manufacture Process Die Casting Description Engineering Parts
We are a direct supplier for high quality Aluminium ADC12 Quantity: 100-500 tons per month or 4 to 20 container Payment term: FOB and CIF Payment: TT in advance / 100% For any further information please feel free to contact us.
Aluminum Alloys
Low temperature alloy casting Category Titanium alloy casting Low temperature alloy casting can be used as an important material for the low-temperature structure of hydrogen-oxygen engines. Common grades are TC4 etc. Product Description Low temperature alloy casting can show stronger mechanical properties at low temperature.At present, it has been used in the field of liquid rocket engines, mainly as structural materials such as hydrogen storage tanks for hydrogen-oxygen engines, hydrogen pump impellers, etc., which greatly improves the comprehensive performance of liquid rocket engines. Low-temperature titanium alloys refer to titanium alloys that can work normally under low temperature conditions. They are generally divided into three categories, alpha titanium alloys, beta titanium alloys and alpha-beta titanium alloys. Typical low-temperature titanium alloy products are suitable for working at 253C as a storage container for liquid fuel, and some alloys have good low-temperature plasticity and fracture toughness. The strength of low-temperature titanium alloys can be increased as the temperature decreases, and the toughness remains basically unchanged, making it easy to weld. It has high specific strength, corrosion resistance and low thermal conductivity. It can not only be used as a storage container for low-temperature objects, but also can be used as low-temperature structural parts for the aerospace industry
