Brighto Epoxy Flooring Topcoat Gloss Suppliers and Manufacturers

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Tufkote W8731PT Floor Clear Satin Tufkote W8783HGP Floor Clear Gloss

Parameters Finish: Clear Gloss: 70%Application Methods: Roller / Brush Substrate: Rubber, Mango Exposure: Formulation

it is mainly used for color cement, color cement floor tiles, color cement tiles, imitation glazed tiles, concrete floor tiles, color mortar, color asphalt, terrazzo, mosaic tiles, artificial marble and wall painting. 2. It can be used for colouring and protecting substances of various coatings, including water-borne interior and exterior wall coatings, powder coatings, etc. It can also be used for various primers and topcoats such as epoxy, alkyd, amino, etc. in oily paints, as well as for toy paints, decorative paints, furniture paints, electrophoretic paints and enamels. Iron red primer has anti-rust function, can replace high-priced red red paint, save non-ferrous metals. The manufacturer supplies iron oxide red, iron oxide green, iron oxide blue, iron oxide yellow, iron oxide violet, iron oxide brown, iron oxide black and so on. The color is complete, the quantity is large and the discount is favorable. Support mixed batches. Welcome to call for consultation.

Kaolinite is the mineral that is derived from the rock called â??Kaolinâ?? and from there, it gets its name. It is also commonly known as â??China Clayâ??. Kaolin is mined from the regions of Gujarat, Rajasthan, Kerala, West Bengal and Jharkhand in India The physical properties of Kaolin include high brightness, non-abrasiveness, poor conductivity of heat and electricity and it has naturally fine particles. Kaolin remains white after calcination due to its refractory properties and can be easily dispersed in water. There are several variations within Kaolin such as Hydrous Kaolin, Metakaolin and Calcined Kaolin. We offer a vast range of Kaolin-based minerals to several businesses from paper manufacturing to porcelain tableware, paints, cosmetics, packaging, rubber and pharmaceuticals to name a few. We customize our minerals according to the needs of the industry of our clients. Hydrous Kaolin has fine particles with plate-like shapes and inertness in terms of chemical reactivity, whereas, Metakaolin is created by the process of calcination of Kaolin. It is a white mineral additive which is most popularly used in cement-based products. In contrast to this, Calcined Kaolin is manufactured by heating the finest natural kaolin to high temperatures in a kiln. This calcination process changes the size and shape of the particles, enhances the whiteness and hardness of the mineral and improves its electrical conductivity. Kaolinite is a clay mineral, with the chemical composition Alâ??Siâ??Oâ??(OH)â?? Various Industrial Usages: Kaolin is a very important mineral in the ceramics industry. Itâ??s high fusion temperature and white firing characteristic makes it perfect to be used in the manufacture of sanitaryware, tableware, floors & tiles and refractories. In the construction industry, kaolin is used to enhance the mechanical properties, porosity and look of several types of cement and concrete. It is also an impeccable source of alumina source in the manufacturing of fiberglass. Kaolin is used in paper manufacturing and fiber-based packaging also. Our Kaolin mineral enhances surface functionality when it is used as fillers or coating pigments and thus further helping in reducing the manufacturing cost of the paper or the packaging. Moreover, it is extensively used in decorative paints formulations as it is a natural opacifier and it is the perfect mineral when high gloss is required. Our specialized Kaolin also can be used as multi-purpose fillers to improve the performance of adhesives, plastics and rubber. We are extremely confident in our offering of Kaolin mineral as we understand how Kaolin can optimize the performance, reduce the costs and can achieve minimum carbon footprint in our clientâ??s end products

Step into elegance and durability with our premium highquality porcelain floor tiles the perfect foundation for any stylish space High Gloss porcelain vitrified tiles Available size 60x120cm 80x80cm 80x160cm 120x240cm 120x180cm