Bitumen Waterproofing Products

Tearing strength: 250/350 n

Ask about your requirements Pallets, rolls of 1m w x 10m l

Name is sbs modified bitumen waterproof membrane. Thickness is 3mm. Reisitance temperature is -5 degree celsius. Length is 10 meters. Width is 1 meter. z

Two kinds of surface material: PE and AL. Tension: N/5CM no less than 130 & 100 Standard export packing

Product category: 1. According to reinforcement: polyester felt(PY) , glass fiber mat(G) and glass fiber reinforced polyester felt(PY) 2. Acoording to isolation materials: upper surface: polyethylene film(PE), sand(S) and mineral slates(M) 3. According to membrane performace: I Grade and II Grade Features: 1. With high tensile strength, high elongation rate and strong adaptability to the shrinkage deformation and cracking of the infrastructure. 2. Excellent resistant to high and low temperature, applicable for hot and cold regions, especially for cold regions 3. Good resistant to acid and alkali corrosion, weather resistance 4. Construction convenience, hot melt method and cold adhesion method. Usage : SBS elastomeric bitumen waterproof membrane is widely used in all kinds of industry and civil building waterproof and seepage waterproof engineering: roof, basement, subway, tunnel, concrete payment bridges, sewage treatment plant, landfill field, canals, water pool, swimming pool etc.

It uses rubber powder, bitumen and special additives as main raw materials. Advantage: 1. The solid content is greater than 98% without solvent and volatile. 2. Adapt to complex construction base. 3. Always maintain the characteristics of viscous gum. 4. Strong waterproof reliability. 5. Excellent aging resistance and long service life. Application: Roof, exterior wall, basement, metro, tunnel, bridge and dam. Reference dosage: 1.3-1.8kg/sqm for 1mm coating Specification: 20kg/barrel

Description: SBS (styrene-butadiene-styrene) thermoplastic elastomeric modified bitumen waterproof membrane is a waterproofing membrane with polyester felt,glass fiber or glass fiber polyester felt as reinforcement,finishing the upper surface with PE film,fine sand or mineral granule. APP (Atactic Polypropylene) modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as APP, APAO, APO), reinforced with polyester or fiberglass, finishing the upward face with polythene membrane, fine sands or mineral slates (or grains) or etc. Specification: Thickness: 3mm 4mm 5mm Width: 1m Length: 7.5m/10m or customized Base: Polyester/Fiberglass Felt Surface: PE film, Aluminum foil, Yellow sand, Mineral Particle

Waterproof bitumen tar paper commonly known as linoleum. A waterproof material used in the construction industry. The base paper has coarse texture, good oil absorption and certain tensile strength. Generally, rags and waste paper are used as raw materials, and high-grade ones can be mixed with some animal hair and slag cotton, which can be copied after beating directly. During processing, the base paper passes through the molten asphalt and is extruded by the hot roller to make the asphalt soak the paper layer, extrude the excess asphalt, and spread talc powder or fragment Mica on the surface for cooling. Use less.

Supplier: Bitumen, waterproof material