Automatic transfer switch is one of adopted international ATSE technology developed by our company. It is suitable for power supply system with rated insulating voltage is AC800V, rated working voltage is AC240/415V, and below DC250V, and AC 50Hz/60Hz, rated working current is 16A-3200A of two-path. The transfer switch and the matching intellect display, they are main used for high building, the post and communication, coal mining, shipping, military facilities industrial assembly line etc the situation of need the interruption power supply. 273*245*120
Available with us a wide array of Automatic Transfer Switch that is known for its optimum quality and cost effectiveness. This switch is sourced from most reliable and trustworthy vendors of the industry. Apart from this, our offered switch is thoroughly examined by our quality experts to ensure its unmatched quality and durable finish. Offered switch is available in various sizes and capacities for our clients to
Automatic transfer switch
Automatic Transfer Switch (ATS) Condition : NEW
Model mumber: yes1-100ga Detailed product description Automatic transfer switch application: source changeover switching for all industrial and commercial lv electrical installations From 20 to 3200a. Original features and advantages: ití»s a wholly new design concept, offering a compact automatic changeover switching System which only requires the power cables to be connected for it to operate. Main functions and characteristics:- motorised changeover of two mechanically-interlocked cut-out and disconnection Systems - emergency manual control - power sources and changeover controlled by an integrated electronic module- configuration, display and communication using an ergonomic programming and command/control Interface - simplified connection using a self-powered voltage measurement kit connected to The power sources which have to be switched over (optional) - product ready for use, tested at the factory
200A MCCB Automatic Transfer Switch Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Technical Specification Model RDQ3CM Working Voltage AC400V 50/60Hz Operation Mode Auto and Manual Transfer Mode Auto Transfer with Auto Recovery Auto Transfer without Auto Recovery Grid·Generator Rated Current 100A to 1250A Poles 3P and 4P Color White / Black Controller A / B Type as per customer RDQ3CM series intelligent dual power auto transfer switch (brief as ATS) suitable for emergency power supply system with rated AC voltage 400V, 50/60Hz. When one power source fault, can auto interchange from main power to backup power, no need manual operation, to protect the power supply stability. Mainly apply to the important place which not allow power cutoff such as Hospital, shopping mall, bank, chemical industry, metallurgy, high building, military facilities and fire-fighting etc. Product Structure RDQ3CM series intelligent ATS comprised with two 3P or 4P MCCB and its accessories (Aux. contact,Alarm contact), Mechanical interlocking transmission mechanism, intelligent controller etc. Have two constructions of integral and split type. Integral type is controller and executive unit installed at a same base; Split type is controller installed on the panel and the executive unit installed on the base inside the panel box, a 2m length signal cable connecting the controller with the executive unit.
SF power changeover automatic transfer switch is a unique solution for the control between two power supplies. It has been developed in order to extend the current range of modular changeover switch to 63A. It meets our customersâ?? need to have a changeover switch fitted on din rail clip and for normal safety application.
Radin Electric provides ATS design engineering and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. a. Control power voltage AC 230V b. Auto Transfer Auto transfer auto recovery auto transfer no auto recovery power grid generator c. Manual transfer Manual main power manual backup power manual OFF d. Isolation lock Off position have isolation function also can padlock locked e. Generator control Generator start and stop f. Fire linkage With passove fire linkage signal to switch OFF the device with one set passive NO feedback contact. g. Display mode Mechanical indication device ON/OFF status operating mode LED device ON/OFF status power status LCD device ON/OFF status power status data setting h. Setting mode Key press operation Chinese/English display interface can set the working mode low voltage value over voltage value delay time auto transfer mode etc. i. Power monitoring ABC three phase over voltage (240 290v adjustable) ABC three phase low voltage (150 200v adjustable) ABC three phase missing monitor j. Delay time Transfer delay (0 300s adjustable) Recovery delay (0 300s adjustable) Generator start stop delay (0 300s adjustable) k. Mounting mode Integated mounting Controller Type A Basic type single phase monitor B. Standard type threee phase monitor fire fighting generator control C Intelligent type three phase monitor fire fighting generator control LCD display D Intelligent type three phase monitor fire fighting generator control split LCD display
Radin Electric  provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Technical Specification Model RDQ3-63 Working Voltage AC150-265V  50/60Hz Operation Mode Auto and Manual Transfer Mode Auto Transfer with Auto Recovery Transfer time delay 0.2s Fixed / 0~30s adjustable Rated Current 6A to 63A  3P and 4P About ATS RDQ3-63 is CB type dual power transfer switch,mainly apply to the two power systems with neutral line earthed and rated current below 63A, rated voltage 230V,50/60Hz, transfer between two power source when one power source fault,to ensure the power supply reliable and safety. Product Structure RDQ3-63 Series ATS usage category AC-33IB,electrical appliance grade CB class,its structure comprise with two MCB and accessories,mechanical interlock transmission mechanism,automatic controller,motor operation mechanism etc.Meanwhile the MCB inside the ATS have its original over load and short circuit protection function,can also used as ON/OFF and protection of the main circuit. Delivery Terms Shipment & Express & Air express
Automatic Transfer Switch (ATS) Welcome to Insel Rectifiers, your trusted provider of advanced electrical solutions. Our Automatic Transfer Switch (ATS) units are designed to ensure seamless power supply transitions, providing reliability and continuity for your critical systems. With our state-of-the-art ATS technology, you can trust that your facility will remain powered even during unexpected outages. Our auto-transfer switch for generators detects disruptions in the main power source and automatically transfers the electrical load to your backup generator, ensuring uninterrupted operation. Ensuring Seamless Power Supply Transitions Insel Rectifierâ??s ATS (automatic transfer switches) are engineered for efficiency and reliability. Equipped with advanced features, including real-time monitoring and swift transfer capabilities, our ATS units guarantee minimal downtime and maximum peace of mind. Whether youâ??re managing a hospital, data center, telecommunications facility, or any other critical infrastructure, our ATS solutions are designed to fit your specific needs. Our team of experts is dedicated to providing top-quality products and exceptional service, ensuring that your power supply remains uninterrupted when it matters most. Our AVR automatic voltage regulators boast advanced features and sturdy construction, offering superior protection against voltage surges and drops. We prioritize quality and reliability at every stage of our AVR design and manufacturing process, guaranteeing that our customers receive the best possible product. Choose Insel Rectifiers for dependable ATS solutions that keep your operations running smoothly, no matter the circumstances. Contact us today to learn more about our automatic transfer switch offerings and how we can support your power continuity needs.
Automatic Transfer Switch (ATS) Welcome to Insel Rectifiers, your trusted provider of advanced electrical solutions. Our Automatic Transfer Switch (ATS) units are designed to ensure seamless power supply transitions, providing reliability and continuity for your critical systems. With our state-of-the-art ATS technology, you can trust that your facility will remain powered even during unexpected outages. Our auto-transfer switch for generators detects disruptions in the main power source and automatically transfers the electrical load to your backup generator, ensuring uninterrupted operation. Ensuring Seamless Power Supply Transitions Insel Rectifierâ??s ATS (automatic transfer switches) are engineered for efficiency and reliability. Equipped with advanced features, including real-time monitoring and swift transfer capabilities, our ATS units guarantee minimal downtime and maximum peace of mind. Whether youâ??re managing a hospital, data center, telecommunications facility, or any other critical infrastructure, our ATS solutions are designed to fit your specific needs. Our team of experts is dedicated to providing top-quality products and exceptional service, ensuring that your power supply remains uninterrupted when it matters most. Our AVR automatic voltage regulators boast advanced features and sturdy construction, offering superior protection against voltage surges and drops. We prioritize quality and reliability at every stage of our AVR design and manufacturing process, guaranteeing that our customers receive the best possible product. Choose Insel Rectifiers for dependable ATS solutions that keep your operations running smoothly, no matter the circumstances. Contact us today to learn more about our automatic transfer switch offerings and how we can support your power continuity needs.
GD2-100 Series double power automatic transfer switch(shift switch) is one of the products that is developed by our company with the international latest ATS technology. The switch and the matched intelligent display are mainly used where uninterrupted power supply is needed, such as high-rise buildings, post and communication, coal mines, ships, military facilities and industrial assembly lines. Under the inevitable trend of rapid increase of power consumption in cities, it can satisfy the higher requirement of power reliability better,and it has the characteristics of reliable performances, small size and simple operation. With reliable and safe interlock It has reliable connection and disconnection main circuit and second circuit function and the setting has self-locking function. It has safety insulation isolate Quick transfer speed,( the transfer time is 0.1s~0.2s ), low malfunction, and reliable capability. Ismall in volume, simple in constitution, large current an ATSE integrate. With the controller, the setting can transfer between the manual and automatic,and has the every protection function. Imake sure the facility safe, it has neutral pole N input first and breaker later function, which can avoid of the abnormal voltage. It adopts DC instantaneous excite way.
Model number: yeq2f (split type) Automatic transfer switches - function: power automatic transfer and overload and short circuit protection - performance: the time delay of transfer time is adjustable and action time is accurate - usage: mainly used in the two-path load field as in hospital, shopping center, Bank, and chemical industry, metallurgy and military facilities - structure: compact in structure, small in volume, high breaking and short arcing - current: 10a~800a - frame current: 63, 100, 225, 400, 630, 800 number of pole: 3p, 4 p - standards: comply with iec 947-6 What's the difference between a manual transfer switch and an automatic unit? with a manual transfer switch, when the power goes out, you need to start your generator, and connect it to the transfer switch. You then need to switch your house over to generator power. When the utility power is restored you need to switch your house back to utility power, and turn off your generator. With an automatic transfer switch, everything is fully automatic. When the utility power goes out, the transfer switch signals your generator to start. Once the generator is running the transfer switch automatically connects your home or business to the generator. When the utility power is restored, the transfer switch reconnects your home or business to the utility. Then it turns off your generator and waits patiently for the next power outage.
Model number:yes1-32c Automatic transfer switches Model:yes1-n/yes1-c Current:16a~32a Pole:2p, 3p, 4p Yes1 is suitable for transferring between two circuits of power supply(main power supply, emergency power supply) in ac 50hz, rated working voltage to 220v and rating current up to 16a~32 a, Function:over voltage, under voltage, lost phase, utility to utility Utility to generator(with a passive contact sent a signal to start or shut off the generator) Attention: it must not do the test of insulating stand voltage for the quality guarantee.
Model numbe:yeq2y(integral type)series Automatic transfer switches yeq2y 63-800a series integral type Ie:10a~800a Poles: 3p/4p Connection:utility - utility or utility - gen, Yeq2 dual-power supply automatic transfer switch is made up of the mechanism And the automatic controller, the body of unit is made up of singe electromotor operating Mechanism, the yeq2 seires circuit breaker , internal accessories (auxiliary contact, alarm contact)motherboard and terminal block. The automatic controller is divided into ensemble and separate, separate, the controller is mounted on the chest, and the cupboard door, the other components are mounted on the mental motherboard (the motherboard has the sockets of the terminal block);ensemble:the single electromotor operating mechanisms , the automatic controller, and the circuit breaker are all mounted on the motherboard, and the structure is compact. What does a transfer switch do, and why do i need one? A transfer switch is the link between your backup generator, the utility company, and Your home or business. It's job is to safely connect your home or business to Your backup generator during a power outage. A properly installed transfer switch Will isolate your generator from the utility company's power lines, protecting The power companies workers from harm. A transfer switch is required by law in All 50 states, and is an essential piece of safety equipment. 1) applicable to automatic transfer for main power supply and reserve supply of feed system or automatic transfer and security isolation of two load equipment 2) integrates switch with logic control as a whole, if without logic control, an additional controller is provided 3) realize selected mechanical integration possessing of voltage inspection, communication interface, electric and mechanical interlock 4) can actualize automatic, electric long range and emergency manual control
Model number: yeq2c Detailed product description Yeq2 series intelligent dual power automatic switch two or three poles and four pole mccb annex (supplementary the police contact), the mechanical interlocking transmission, intelligent controller and other components. It has the integral style and split type two kinds mechanism. Integral controller is equipped with a base and executing agencies; split type is intelligent controller installed in the panel , installed user base by implementing agencies to install the counter body controller with the implementing agencies with about 2m long cables. The body of the intelligent system consists of such accessories as dedicated positive/negative electromotor, breaker, fire control tripping, mechanical interlocking, aviation plug and connector terminal. All components are installed on the same metal sheet. The intelligent system (400vac 50/60hz working voltage) is provided with the function of mechanical-electrical interlock protection to guarantee safe and reliable power supply for you. Functions:1. The automatic controller can measure the voltages of both circuits at the same Time. When the supply voltage is higher than 115% of the rated value, it judges As over voltage; when it is lower than 60% ~ 80% (preset by user) of the rated voltage, It judges as under voltage. The microcomputer judges and processes the measuring Results and then sends out corresponding orders as switch-off, switch-on, generation, Unloading and alarming.
Generator Load Transfer Switch ATS for Diesel Generators Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDQ3NM Series Advantages: 1. There is a reliable mechanical interlock device and electric interlock protection between two MCCB, completely avoid the possibility of two MCCB closed at same time; 2. Intelligentized controller adopt the single chip microcomputer (SCM) as the control core, simple hardware, strong functions, easy extension, high reliability; 3. Intelligent controller circuit layout design adopt power sampling separate with SCM control, from the hardware to overcome the electromagnetic interference; 4. With short circuit, over load protection functions, over-volt & under-volt,phase missing auto transfer function and intelligent alarm function; 5. Auto transfer data by external setting freely, with operation motor protect function; 6. Signal connecting cable have passed FLUKE instrument channel test, anti near crosstalk,attenuation crosstalk and back wave loss, can meet the test criteria for permanent link; 7. The ATS controller installation method provide customer with highly autonomy, ( split installation only need simply connect the attached RJ45 signal cable to the corresponding terminal port);
PC Type Load Auto Transfer Switch for Generators It adopted double complex contact/ horizontal pulling mechanism/micro motor energy pre storage and micro-computer control technology, basically come to Zero arc ( no arcing chamber); Adopted reliable mechanical interlock and electric interlock, executive unit adopt independent load disconnect switch, it makes more reliable and safety; Adopt "Zero Position" technology, it can force to set to Zero Position under emergency situation ( cutoff two way power supply, meet the fire linkage requirements; Load disconnect switch change over adopt singleness motor drive, switch over smooth and reliable, no noise, little impact; The driving motor have instant current across only under the load disconnect switch change over, stable working status no need to provide the working current, outstanding energy saving. Executive load disconnect switch have mechanical interlock, make sure the Normal power and Reserve Power working reliable and no interference; Distinct ON and OFF position indicator, padlock function etc., make reliable and safe isolation between power supply and loading. High security, high automatization, high reliability, working life more than 8000 times; Electromechanical integration design, accuracy change over, flexible, smoothly, adopt international advanced logical control technology, high anti-interference ability, no interference outward. Have main power ON, backup power OFF; main power OFF, backup power ON; main and backup power OFF; three working mode (I-o-II); Easy installation, control circuit adopt plug type terminal connection Four operating functions: Emergency manual, motor remote control, emergency OFF under auto control status, auto control operation. Basic Type Switch Control Characteristic Suitable for two way main and backup power system, auto transfer with auto recovery; Can expand functions by outer connection; Auto, Remote, Manual control functions; Delay 0.5s signal detect, avoid miss actuation; Under Auto control status have "O" position remote control; Can with RS-485 communication port ( optional), according to customer required.
Automatic transfer switch (ats), and circuit breaker in lw..
Load Change Over Switch ATS Power Switch for Generators Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz, rated voltage 380V, rated DC voltage 220V, and rated current 16A to 3200A, change over between main power and backup power, mutual work as backup power system and city power and Generator power. At the same time, it can act as disconnector for the un-frequency ON and OFF circuit or lines. Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed, such as fire-fighting, hospital, bank, high buildings etc. RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch and logical control together, no need extra controller, is an electromechanical integration auto transfer switch, with voltage monitoring, frequency monitoring, communication port, electrical and mechanical interlock functions etc., can achieve auto control, remote motor control and emergency manual control. Operation is achieve by logical control board with various logical commands to managing the motor, gear-box running, motor with spring energy storage, instant release accelerating mechanism, quickly open and close the circuit or make quick transferring, through visible status to make sure the safety isolation, greatly improved the every electrical and mechanical performance. RDS2 ATS integral designed with metal case, compact and strong. RDS2 ATS, the control part is with metal cover, switch part with DMC case, have strong dielectric performance, protection performance and reliable operation safety. The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc. The switch has beautiful appearance, novelty, small size, complete functions, is the best choose among the similar products. RDS2 series product have passed the EMC test.
