Automatic Transfer Switches

Automatic transfer switch is one of adopted international ATSE technology developed by our company. It is suitable for power supply system with rated insulating voltage is AC800V, rated working voltage is AC240/415V, and below DC250V, and AC 50Hz/60Hz, rated working current is 16A-3200A of two-path. The transfer switch and the matching intellect display, they are main used for high building, the post and communication, coal mining, shipping, military facilities industrial assembly line etc the situation of need the interruption power supply. 273*245*120

Automatic Transfer Switch (ATS) Condition : NEW

Model mumber: yes1-100ga Detailed product description Automatic transfer switch application: source changeover switching for all industrial and commercial lv electrical installations From 20 to 3200a. Original features and advantages: ití»s a wholly new design concept, offering a compact automatic changeover switching System which only requires the power cables to be connected for it to operate. Main functions and characteristics:- motorised changeover of two mechanically-interlocked cut-out and disconnection Systems - emergency manual control - power sources and changeover controlled by an integrated electronic module- configuration, display and communication using an ergonomic programming and command/control Interface - simplified connection using a self-powered voltage measurement kit connected to The power sources which have to be switched over (optional) - product ready for use, tested at the factory

200A MCCB Automatic Transfer Switch Radin Electric  provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Technical Specification Model RDQ3CM Working Voltage AC400V  50/60Hz Operation Mode Auto and Manual Transfer Mode Auto Transfer with Auto Recovery Auto Transfer without Auto Recovery Grid·Generator Rated Current 100A to 1250A Poles 3P and 4P Color White / Black Controller A / B Type as per customer RDQ3CM series intelligent dual power auto transfer switch (brief as ATS) suitable for emergency power supply system with rated AC voltage 400V, 50/60Hz. When one power source fault, can auto interchange from main power to backup power, no need manual operation, to protect the power supply stability. Mainly apply to the important place which not allow power cutoff such as Hospital, shopping mall, bank, chemical industry, metallurgy, high building, military facilities and fire-fighting etc. Product Structure RDQ3CM series intelligent ATS comprised with two 3P or 4P MCCB and its accessories (Aux. contact,Alarm contact), Mechanical interlocking transmission mechanism, intelligent controller etc. Have two constructions of integral and split type. Integral type is controller and executive unit installed at a same base; Split type is controller installed on the panel and the executive unit installed on the base inside the panel box, a 2m length signal cable connecting the controller with the executive unit.

SF power changeover automatic transfer switch is a unique solution for the control between two power supplies. It has been developed in order to extend the current range of modular changeover switch to 63A. It meets our customersâ?? need to have a changeover switch fitted on din rail clip and for normal safety application.

Radin Electric provides ATS design engineering and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. a. Control power voltage AC 230V b. Auto Transfer Auto transfer auto recovery auto transfer no auto recovery power grid generator c. Manual transfer Manual main power manual backup power manual OFF d. Isolation lock Off position have isolation function also can padlock locked e. Generator control Generator start and stop f. Fire linkage With passove fire linkage signal to switch OFF the device with one set passive NO feedback contact. g. Display mode Mechanical indication device ON/OFF status operating mode LED device ON/OFF status power status LCD device ON/OFF status power status data setting h. Setting mode Key press operation Chinese/English display interface can set the working mode low voltage value over voltage value delay time auto transfer mode etc. i. Power monitoring ABC three phase over voltage (240 290v adjustable) ABC three phase low voltage (150 200v adjustable) ABC three phase missing monitor j. Delay time Transfer delay (0 300s adjustable) Recovery delay (0 300s adjustable) Generator start stop delay (0 300s adjustable) k. Mounting mode Integated mounting Controller Type A Basic type single phase monitor B. Standard type threee phase monitor fire fighting generator control C Intelligent type three phase monitor fire fighting generator control LCD display D Intelligent type three phase monitor fire fighting generator control split LCD display

Radin Electric  provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. Technical Specification Model RDQ3-63 Working Voltage AC150-265V  50/60Hz Operation Mode Auto and Manual Transfer Mode Auto Transfer with Auto Recovery Transfer time delay 0.2s Fixed / 0~30s adjustable Rated Current 6A to 63A  3P and 4P About ATS RDQ3-63 is CB type dual power transfer switch,mainly apply to the two power systems with neutral line earthed and rated current below 63A, rated voltage 230V,50/60Hz, transfer between two power source when one power source fault,to ensure the power supply reliable and safety. Product Structure RDQ3-63 Series ATS usage category AC-33IB,electrical appliance grade CB class,its structure comprise with two MCB and accessories,mechanical interlock transmission mechanism,automatic controller,motor operation mechanism etc.Meanwhile the MCB inside the ATS have its original over load and short circuit protection function,can also used as ON/OFF and protection of the main circuit. Delivery Terms Shipment & Express & Air express

Generator Load Transfer Switch ATS for Diesel Generators Radin Electric  provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements. RDQ3NM Series Advantages: 1. There is a reliable mechanical interlock device and electric interlock protection between two MCCB, completely avoid the possibility of two MCCB closed at same time; 2. Intelligentized controller adopt the single chip microcomputer (SCM) as the control core, simple hardware, strong functions, easy extension, high reliability; 3. Intelligent controller circuit layout design adopt power sampling separate with SCM control, from the hardware to overcome the electromagnetic interference;  4. With short circuit, over load protection functions, over-volt & under-volt,phase missing auto transfer function and intelligent alarm function; 5. Auto transfer data by external setting freely, with operation motor protect function; 6. Signal connecting cable have passed FLUKE instrument channel test, anti near crosstalk,attenuation crosstalk and back wave loss, can meet the test criteria for permanent link; 7. The ATS controller installation method provide customer with highly autonomy, ( split installation only need simply connect the attached RJ45 signal cable to the corresponding terminal port);

PC Type Load Auto Transfer Switch for Generators It adopted double complex contact/ horizontal pulling mechanism/micro motor energy pre storage and micro-computer control technology, basically come to Zero arc ( no arcing chamber); Adopted reliable mechanical interlock and electric interlock, executive unit adopt independent load disconnect switch, it makes more reliable and safety; Adopt "Zero Position" technology, it can force to set to Zero Position under emergency situation ( cutoff two way power supply, meet the fire linkage requirements; Load disconnect switch change over adopt singleness motor drive, switch over smooth and reliable, no noise, little impact; The driving motor have instant current across only under the load disconnect switch change over, stable working status no need to provide the working current, outstanding energy saving. Executive load disconnect switch have mechanical interlock, make sure the Normal power and Reserve Power working reliable and no interference; Distinct ON and OFF position indicator, padlock function etc., make reliable and safe isolation between power supply and loading. High security, high automatization, high reliability, working life more than 8000 times; Electromechanical integration design, accuracy change over, flexible, smoothly, adopt international advanced logical control technology, high anti-interference ability, no interference outward. Have main power ON, backup power OFF; main power OFF, backup power ON; main and backup power OFF; three working mode (I-o-II); Easy installation, control circuit adopt plug type terminal connection Four operating functions: Emergency manual, motor remote control, emergency OFF under auto control status, auto control operation. Basic Type Switch Control Characteristic Suitable for two way main and backup power system, auto transfer with auto recovery; Can expand functions by outer connection; Auto, Remote, Manual control functions; Delay 0.5s signal detect, avoid miss actuation; Under Auto control status have "O" position remote control; Can with RS-485 communication port ( optional), according to customer required.