Application By means of continuous casting & rolling, this line works to produce oil-free conductive aluminum rod in a diameter 9.5mm or 2mm. or 5mm. 2. Brief Process Flow 2.1. Ordinary aluminum ingot and scrap â??Melting furnaceâ?? holding furnaceâ?? 4-wheel continuous casting machine â?? front drive unit â?? roller shearsâ?? continuous rolling mill â?? cooling & lubricating device for aluminum rod â?? twin-basket continuous coilerâ?? oil-free aluminum rod 2.2. Molten aluminum or prepared aluminum melt flows from the holding furnace into the 4-wheel casting machine via the launder and is cast into trapzoid-shaped bar in a cross-sectional area of 2400mm2. Cut off the bar that does not meet the requirement for rolling with the roller shears, press the front end and feed it into the rolling mill, the rod is coiled into the basket with the coiler. 3. Main Components This production line is composed of Melting furnace (5t/h), Twin-chamber holding furnace (28t) , 4-wheel casting machine, front drive unit, roller shears, supporting device for cast bar movement, continuous rolling mill, lubrication oil system for rolling mill, emulsion circulation system for rolling mill, cooling & lubricating system for aluminum rod, two-position coiler, and electrical control system and so on. 4. Main Technical Data 4.1. Diameter of aluminum rod Φ9.5mm or Φ12mm or Φ15mm 4.2. Production capacity 2.5~5.0t/h 4.3. Overall dimension 32.057.24.2 meters 4.4. Total weight 65 tons 4.5. Total installed power 350kW (not including power for furnace)
1. Application This production line works to produce pure aluminum rod or alloy aluminum rod in diameter of Ï?9.5mm or Ï?12mm by means of continuous casting and rolling. 2. Composition This production line is composed of 5T/H vertical high energy-saving melting furnacï¼? Round Tilting Holding Furnaceï¼?2Ñ?10T, electromagnetic blender to support the 10T Round Tilting Holding Furnaceï¼?, in-line degassing & filtering system, 4-wheel casting machine and pouring ladle, roller shears, motorized straightener, multi-frequency induction heater, cast bar feed-in device, rolling mill, alloy rod cooling systems, dual-position coiler, electrical control system, rolling mill lubrication system and emulsion system, etc. 3.Main Technical Data 4.1.Diameter of casting wheel: Ï?1600 mm 3.2. Cast bar delivery speed: 8~12mpm 3.3. Cross sectional area of cast bar: 2400 mm2 3.4. Motor of casting machine: 4kW (AC, frequency speed regulation) 3.5. Motor of rolling mill: 355kw, 600rpm 3.6. Final rolling speed: 4~6.2m/sec. 3.7. Output: approx. 2.7~4.2 t/h 3.8. Outlet rod diameter: Ï?9.5mm, Φ12mm, Φ15mm 3.9. Number of stands: 15 (7 stands with Y-shaped rolls of upper driving, 8 stands with Y-shaped rolls of lower driving) 3.10. Pass system: arc triangle â?? circle 3.11. Nominal diameter of roll: Φ255mm 3.12. Diameter of coil: Φ2000mm 3.13. Weight of coil: approx. 1~1.5 tons/basket 3.14. Total installed power: 950kw
1This plant works to produce low-oxygen glossy copper rod in 8 mm diameter by means of continuous casting and rolling process, with cathode or red copper scrap as the feed stock. The plant is composed of 1 set or 2 sets of reverberatory with 60-ton capacity, five-wheel casting machine, drive unit, roller shears, straightener and burring unit, shaver, rolling mill, coiler, and electrical control system. 2. Red Copper Scrap as Feedstock Red copper scrap as the feedstock must be Grade 1 or above Grade 2. Copper scrap on excellent grade (Pb
We deals in the following products of India, China, Taiwan and Korea Origin:- Aluminium Wire Rod Aluminium Billets
Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps.
Aluminum Skirting line
Aluminum 2-Section Extension Pole Telescopic Pole for Window Squeegee 4-8 Additional information Weight 1.2 lbs Quantity 1/Each Material Pole: Aluminum Handle: Plastic Locking Cone: Plastic Shortest length 4' Longest length 8'
Aluminum 2-Section Extension Pole Telescopic Pole for Window Squeegee 2-4 Additional information Weight 1.2 lbs Quantity 1/Each Material Pole: Aluminum Handle: Plastic Locking Cone: Plastic Shortest length 2' Longest length 4'
Aluminum Hot/Cold Rolled Coils(DC/CC Route) Alloy 1XX, 3XX, 5XX, 8XXX etc Temper O, H14, H16, H18, H24, F, T6, T651 Thickness 0.2-200MM Width 200MM-2600MM
This machine works to draw î¦8mm copper rod into copper wire ranging from î¦1.2-4.0mm and further softens the wire by direct annealing, and then the wire is taken up into î¦630 or î¦500 bobbin by dual spooler or coiler by î¦800 coiler. The product conforms to the the requirements of the chinese national standard gb3953. 1. Main technical data 1.1. Input diameter: î¦8mm cold-rolled copper rod 1.2. Output diameter: î¦1.2~4.0mm 1.3. No. Of drawing dies: 13 1.4. Diameter of capstan: î¦450mm 1.5. Max. Delivery speed: 25m/sec. 1.6. Take-up motor 2x22kw (dc) 1.7. Mode of annealing dc annealing 1.8. Main motor 280kw (dc) 1.9. Motor of final capstan 90kw (dc) 1.10. Coiling motor 22kw 1.11. Max. Annealing power 360kva 2. Composition 2.1. Pay-off stand 1 set 2.2. Drawing machine proper 1 set 2.3. Horizontal annealer 1 set 2.4. Tensioner for accumulator 1 set 2.5. Dual spooler forî¦630 orî¦500 bobbin 1 set 2.6. Φ650 coiler 1 set 2.7. Pointing & threading unit 1 set 2.8. Electrical control system 1 set 2.9. Steam generator 1 set 2.10. Gearbox lubrication system 1 set
Dear Sirs , Our company exports Aluminium ingots Country of origin Russia. We can offer you product in reliable prices and conditions. in case of need we can send certificates and samples. Payment terms: Prepayment 100% Volume: 80 000 ton Price negotiable. Delivery term:FCA Uzbekistan.
Metals: diesel en590 (ppm10), petroleum, aviation kerosene, aluminum ingots, copper scrap, copper wire rod.
Aluminum foils & sheets & ingots, rods, coils, paper bags & cling films, aluminum circle, aluminum prepainted coil, aluminum chequered sheet, aluminum plain sheets, aluminum hot/cold rolled coils, aluminum billets, aluminum ingots, aluminum foil.
Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Copper rod cc-r line, alminum rod cc-r line, aluminum alloy rod cc-r line, high speed drawing machine for copper rod or aluminum alloy rod.
Copper rod, copper cathode, nickel silver, aluminum ingots, aluminum lloy billets, aluminum rods,.
Aluminum rod Aluminum rod and bar products: 1. Medium and small size extrusion products: Alloy: 2xxx, 4xxx, 6xxx, 7xxx series; temper: h112, o, f, t4, t6 Alloy: 1xxx, 3xxx, 5xxx, 8xxx series; temper: h112, o, f 2. Large size extrusion products Alloy: from 1xxx to 7xxx series; temper: h112, f Alloy: 1xxx, 3xxx, 5xxx, 8xxx series temper: o Alloy: 2a11, 2a12, 2a13, 6061 temper: t4 Alloy: 2xxx, 4xxx, 6xxx, 7xxx series temper: t6 Diameter (mm): 50-150 Alloy: 2xxx, 4xxx, 6xxx, 7xxx series; temper: h112, o, f, t4, t6 - alloy: 1xxx, 3xxx, 5xxx, 8xxx series; temper: h112, o, f - diameter (mm): 6-150 - adopt standard: Gb/t3191 gjb2054 Note: the dimension can be produced according to clients' specific requirement. Suitable for sea transportation (eye to sky, eye to wall)
Name Aluminum rod bar 5052 Standard ASTM  B209,JIS H4000-2006,GB/T 3190-2008,GB/T 3880-2006,etc. Material Grade 1,100,105,010,601,070,000,000,000,000,000,000,000,000 1000 Series 1050 1060 1070 1100 2000 Series 2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17 3000 Series 3A21, 3003, 3103, 3004,  3005, 3105 4000 Series 4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A 5000 Series 5052, 5083, 5754, 5005, 5086,5182 6000  Series 6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02 700  Series 7075,7050,7A04,7472,7475 Diameter5mm-2500mm or as the customer's request Length 2000mm,2440mm,6000mm,or as required. or As customers requirements Tolerance Acording to the Standard. Surface Wire drawing,oxidation,PS,Mirror surface,Embossing etc Package Standard  export package,such as wooden box or as required. Certificate API Delivery Time 7-30Days,  Depends on quantity
We supply a wide range of Aluminum Ingots that meet international standards and specifications. Aluminum ingots are a crucial raw material used in numerous industries, including automotive, construction, aerospace, and electrical. They are highly sought after for their lightweight, corrosion-resistant, and excellent conductivity properties. Aluminum ingots serve as the building blocks for manufacturing various Aluminum-based products, such as sheets, rods, extrusions, and castings. Specifications/Special Features : Aluminum A7/A8 GOST 11069-74 Quality Value demanded by norm GOST 11069-74 A7 A8 Al Min. 99,7% Min. 99,8% Fe Max. 0,16% Max. 0,11% Si Max. 0,15% Max. 0,08% Cu Max. O,01% Max. 0,01% Zn max. 0,05% Max. 0,05% Ti max. 0,02% Max. 0,02%. Contact AWF Global Trading Company Limited today to discuss your requirements. Our team will be delighted to assist you and provide you with the best solutions tailored to your needs. Let us be your partner in the world of commodity trading.
Pine timber, pine wood logs, beech lumbers, icumsa 45, spruce logs, ash logs timber, structural pine lumber, oaks lumber and timber, azobe wood logs, tali wood logs, teak wood logs, sapeli timber, obeche wood logs, paddock wood logs, rice, wheat grains, yellow corn, maize , aluminum scrap, scrap metals, copper millberry scrap, copper scrap, aluminum wheels,, frozen chicken, chicken parts, chicken paws, whole chicken, sunflower oil, edible oils, face mask, nitrile gloves, surgical face masks, surgical gowns, a4 papers, iron rods, deformed iron rods, cement, wood pellets, wood pallets, ash wood logs and timber, yellow pine, icumsa 45, sugar.
