1. Application
This production line works to produce pure aluminum rod or alloy aluminum rod in diameter of Ï?9.5mm or Ï?12mm by means of continuous casting and rolling.
2. Composition
This production line is composed of 5T/H vertical high energy-saving melting furnacï¼? Round Tilting Holding Furnaceï¼?2Ñ?10T, electromagnetic blender to support the 10T Round Tilting Holding Furnaceï¼?, in-line degassing & filtering system, 4-wheel casting machine and pouring ladle, roller shears, motorized straightener, multi-frequency induction heater, cast bar feed-in device, rolling mill, alloy rod cooling systems, dual-position coiler, electrical control system, rolling mill lubrication system and emulsion system, etc.
3.Main Technical Data
4.1.Diameter of casting wheel: Ï?1600 mm
3.2. Cast bar delivery speed: 8~12mpm
3.3. Cross sectional area of cast bar: 2400 mm2
3.4. Motor of casting machine: 4kW (AC, frequency speed regulation)
3.5. Motor of rolling mill: 355kw, 600rpm
3.6. Final rolling speed: 4~6.2m/sec.
3.7. Output: approx. 2.7~4.2 t/h
3.8. Outlet rod diameter: Ï?9.5mm, Φ12mm, Φ15mm
3.9. Number of stands: 15 (7 stands with Y-shaped rolls of upper driving, 8 stands with Y-shaped rolls of lower driving)
3.10. Pass system: arc triangle â?? circle
3.11. Nominal diameter of roll: Φ255mm
3.12. Diameter of coil: Φ2000mm
3.13. Weight of coil: approx. 1~1.5 tons/basket
3.14. Total installed power: 950kw
Application By means of continuous casting & rolling, this line works to produce oil-free conductive aluminum rod in a diameter 9.5mm or 2mm. or 5mm. 2. Brief Process Flow 2.1. Ordinary aluminum ingot and scrap â??Melting furnaceâ?? holding furnaceâ?? 4-wheel continuous casting machine â?? front drive unit â?? roller shearsâ?? continuous rolling mill â?? cooling & lubricating device for aluminum rod â?? twin-basket continuous coilerâ?? oil-free aluminum rod 2.2. Molten aluminum or prepared aluminum melt flows from the holding furnace into the 4-wheel casting machine via the launder and is cast into trapzoid-shaped bar in a cross-sectional area of 2400mm2. Cut off the bar that does not meet the requirement for rolling with the roller shears, press the front end and feed it into the rolling mill, the rod is coiled into the basket with the coiler. 3. Main Components This production line is composed of Melting furnace (5t/h), Twin-chamber holding furnace (28t) , 4-wheel casting machine, front drive unit, roller shears, supporting device for cast bar movement, continuous rolling mill, lubrication oil system for rolling mill, emulsion circulation system for rolling mill, cooling & lubricating system for aluminum rod, two-position coiler, and electrical control system and so on. 4. Main Technical Data 4.1. Diameter of aluminum rod Φ9.5mm or Φ12mm or Φ15mm 4.2. Production capacity 2.5~5.0t/h 4.3. Overall dimension 32.057.24.2 meters 4.4. Total weight 65 tons 4.5. Total installed power 350kW (not including power for furnace)
1This plant works to produce low-oxygen glossy copper rod in 8 mm diameter by means of continuous casting and rolling process, with cathode or red copper scrap as the feed stock. The plant is composed of 1 set or 2 sets of reverberatory with 60-ton capacity, five-wheel casting machine, drive unit, roller shears, straightener and burring unit, shaver, rolling mill, coiler, and electrical control system. 2. Red Copper Scrap as Feedstock Red copper scrap as the feedstock must be Grade 1 or above Grade 2. Copper scrap on excellent grade (Pb
This machine works to draw î¦8mm copper rod into copper wire ranging from î¦1.2-4.0mm and further softens the wire by direct annealing, and then the wire is taken up into î¦630 or î¦500 bobbin by dual spooler or coiler by î¦800 coiler. The product conforms to the the requirements of the chinese national standard gb3953. 1. Main technical data 1.1. Input diameter: î¦8mm cold-rolled copper rod 1.2. Output diameter: î¦1.2~4.0mm 1.3. No. Of drawing dies: 13 1.4. Diameter of capstan: î¦450mm 1.5. Max. Delivery speed: 25m/sec. 1.6. Take-up motor 2x22kw (dc) 1.7. Mode of annealing dc annealing 1.8. Main motor 280kw (dc) 1.9. Motor of final capstan 90kw (dc) 1.10. Coiling motor 22kw 1.11. Max. Annealing power 360kva 2. Composition 2.1. Pay-off stand 1 set 2.2. Drawing machine proper 1 set 2.3. Horizontal annealer 1 set 2.4. Tensioner for accumulator 1 set 2.5. Dual spooler forî¦630 orî¦500 bobbin 1 set 2.6. Φ650 coiler 1 set 2.7. Pointing & threading unit 1 set 2.8. Electrical control system 1 set 2.9. Steam generator 1 set 2.10. Gearbox lubrication system 1 set
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Supplier: Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps
Buyer: Aluminium ( ingots, t bars, sows, rods), copper (cathodes, cakes, billets, ingots, rods), lead (ingots), nickel (cathodes both cut and uncut briquettes, pellets, discs, etc.), tin (ingots, etc.), zinc (ingots both regular size and jumbos), steel billets (all types including crc, hrc, hdgc, plates, sheets), concentrates and ores for above items including bauxite, manganese, clinker and iron ores etc), scraps of above items including hms 1&2 and steel scraps
Material: high carbon spring steel, spring steel, stainless steel, alloy steel Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm Torsion spring wire diameter :0.2-35mm Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution. Extension spring hook include Germany hook, British hook, Side hook We can customize special design of springs based on your requirement.
- Solid stainless steel in SS304, SS316, SS316L - Satin Chrome, Satin Stainless Steel, Mirror polished - Standoff,Ø32mm x 20mm, Ø38 x 20MM, Ø38 x 30MM, Ø50 x 20MM, Ø50 x 30MM etc. - 10mm, 12mm glass - Screw rod length as per requirement, screw rod with hex insert if required. - Can supply with hole or without hole.
Product Name : Bathroom Accessories Product Description : We supply various bathroom accessories like Towel rods, toilet tissue holders, brush holders, soap tray etc. We can in SS, Brass Chrome or satin finish, Alumnium, Black ORB plating, Gold or other colors. Please contact us for more details. Key Words : Bathroom accessories, toilet accessories, towel rods, toilet tissue holders, brush holders, soap tray.