General purpose lubricant silicone for all application. Produced by hi-tec German technology. 24 pieces in a carton.
MS 2000- Parts Elastic Sealant DESCRIPTION: MS2000 is an adhesive and sealant based on MS-polymers to provide a two –part, fast curing product. It has an outstanding bonding strength and prime less adhesion on various types of substrates. ADVANTAGES: Eco-friendly, Green, Healthy High efficiency, suitable for large-scale construction Less than 5% of the waste, saving costs Excellent weather resistance Outstanding Surface compatibility with paint systems No pollution to the substrate Excellent adhesion No pollution to the substrate Low modulus, high elongation, suitable for large displacement seams APPLICATION: Joint sealing for PCA board Joint sealing for metal wall hanging Joint sealing for concrete products Sealing Around the window frames. NOTICE: Not applied to GLASS After the two-component mixing the gel time of 3 hours, the need for construction at this time Must comply with the primer, otherwise no adhesion TEST RESULT: Item Results GB/T22083-2008 F-25LM Elastic recovery% 90 Tensile Modulus 23 0.2 - 20 0.3 Tensile properties NO DEMAGE Adhesion/cohesion properties at variable temperatures NO DEMAGE Adhesion/cohesion properties at constant temperature NO DEMAGE Extension after immersion in water NO DEMAGE Volume Loss(%) 2 Liquidity/MM 0 SPECIFICATION: Properties Parameter Appearance White paste, all colors Ratio=main agent: harder: color paste 100:10:5 Shelf life(under 25) 6 months Density(g/cm3) 1.1 Operation time 5 5 23 2/4/6 35 2( summer Package 4L
1.Excellent dielectric property 2.Excellent water and oxidative resistant performance 3.Operating temperature range (-50C to 27;C) 4.Adhere well to metal, ceramic, rubber and other isolation materials 5.Excellent corona resistance 6.Non-poisonous and low volatile PROPERTY STANDARD VALUE Color Visual inspection Transparent/Light grey Density 25C, g/cm3 1.0 Penetration (Static) mm/10 250 Penetration (Dynamic) mm/10 350 Max Oil Bleed 24hours, 27;C 12% Max Volatility 24hours, 27;C 2% Max Volume resistance 27;C, ohm-cm61;¨¢1012 Dielectric constant MHz 2.9 Power factor 100Hz -10MHz 0.0025 dielectric strength 1.25mm gap, kV/mm 19.5 1 KG/Bucket, 25 KG/Bucket, 200KG/ Bucket.
;Key Features .Two-part : mixture addition type silicone adhesive 2.Low hardening shrinkage 3.Excellent electrical insulation in high temperature and stability 4.Good waterproof and moisture resistance 5.Excellent flame resistance, UL No: E34099 ;Typical Applications Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc. ;Technical Data Table PROPERTY STANDARD/UNITS VALUE of SI2230 ---- ---- PART A PART B Color Visual inspection white / black viscous liquid white viscous liquid Viscosity 27;C, cps 6;¨¤500 6;¨¤500 Density 27;C, g/cm3#6;¨¤0.05#6;¨¤0.05 Mixture ratio Mass ratio A:B=00:00 Viscosity of mixture 27;C, cps 6;¨¤500 Operation time 27;C, min 60¨¤0 Cure condition RTV/HEAT 27;C/ 4 hour;#7;C/ 30min Cured appearance ---- White/ Gray-black elastomer Hardness Shore A 56;¨¤5 Thermal conductivity W/mK 0.80 Linear expansion coefficient K-, ppm 300 Dielectric strength kV/mm, 27;C Y20 Volume resistance DC500V, ohm-cm .¨¢05 Loss factor MHz 0.009 Dielectric constant MHz 3.00 Application temperature C -60~200 Flame resistance UL-94 V-0 Part A--0 KG/Bucket, Part B--0 KG/ Bucket.
One Component Thermal silicone Grease/Lubricating silicone Grease CAS No.:67763-03-05 Other Names:adhesives sealants MF: mSiO2nH2O EINECS No.: 231-545-4 Place of Origin:Shanghai, China (Mainland) Classification:Other Adhesives Main Raw Material:Silicone Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking, Electronics,ceramics,air filters/steam irons Brand Name: SEPNA Model Number:SI1101 Type:one-component Product name:Thermal silicone Grease/Lubricating silicone Grease Color:White Paste Density: 2.2 Thermal conducivity: 1.5 Packing: 2 KG/Bucket Certificate:SGS, ISO9001:2008, MSDS, RoHS,Reach ODM/OEM:Accepted Shipping:By Express(Fedex, UPS ,DHL,TNT) Samples::Free samples sample time: within one week Packaging Details:Package for Thermal silicone Grease 2 KG/Bucket Delivery Detail:10 days
Adhesive glue is made of MDI , HDI, plasticizer, polyther, antistalin, oxygen absorbent etc one component environmental protection PU adhesive for paving applies to air permeability and compound running tracks and courts Environmental Protection PU Adhesive for Rubber Tiles Packaging: 200kg/drum galvanization iron drums Delivery Detail: 7days Primer for asphalt and concrete base MDI based No bad smell One component PU adhesive is used for rubber tiles, there's no stimulating odor during process
1.MDI/HDI one component polyurethane binder. 2.100% eco-friendly. no harm,no poison PU Adhesive is used to pave rubber flooring and make rubber tiles, such as athletic field, sports courts, children playground, walking way, park, etc. Suggested ratio of adhesive and SBR is 1:7, adhesive and EPDM is 1:5. With 20-30% air humidity, it needs 2 hours for curing; while it reaches 75%, construction is not recommended. Normal packing is 200kg/barrel, customized packing is also allowed. It applies to air permeability and compound running tracks and courts. It applies to make rubber tiles, which are used for paving kindergartens, excise yards and gyms.
Be reactive groups vinyl that can be used in different property of addition silicone rubber, electronic silicone rubber, basic polymer and so on. 20kg/set£¨A10kg+B10kg), packaging with bucket.
Silicone grease is semi-permeable white grease, the properties are non-toxic, superior waterproof and adhesiveness, that can be compatible with plastic and keep the stability of lubrication.Widely used in appliances, toy, office equipment such as photocopier, paper shredder/printer and plastic gear of massager. according to customer's demand
ZS-GF-5299E is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts in the curing reaction, which can be applied for PC (poly-carbonate), PP, ABS, PVC and other surface of metal. Complied with the ROHS, REACH of EU directive.
Softening point:approx. 100-110¡æ, ring & ball Appearance:light yellow grain Viscosity: 1000-2000cps@150¡æ Operating temperature:140-160¡æ Packing: 25kg/bag 25kg/bag
Softening point:approx. 85-95¡æ, ring & ball Appearance:light yellow block solid Viscosity: 1400-1800cps@150¡æ Operating temperature:150-170¡æ Packing: 1kg / pcs 24kg / carton 1kg / pcs 24kg / carton
Designed to ensure application efficiency and maximum production speeds and will not cause attack on polystyrene foam or other sensitive substrates when used strictly according to directions. Adhesive f31 is normally used as contact adhesives, but is also suitable for use in many pressure-sensitive applications. 7 kg 13 kg 15 kg
Is specially formulated for halogenating rubber, synthetic materials and tpu soles. Used in footwear manufacturing. It can also be used as an alternative to mechanical roughing of rubber soles. Primers are normally available in a powder form along with specific thinner. Both the products should be mixed at the manufacturers' factory as per the specified ratio (e.G. 2.5 gms. Powder in 100 ml solvents) 1 ltr
Adhesive for bonding skin to cork, cloth, leather and coria for sandals and slippers; cold assembling of uppers on cardboard or salpa insoles; finishing of sundry materials, wooden heels and wedges; various kinds of bonding for leather goods. Suitable also for bonding leather-skin shoes in ago working.
Extra strong and heavy polyurethane adhesive as a high quality of raw material for bonding all pvc infection moulded sole units, it is one or two components holding a high viscosity and heat resistance for especially warm countries 2.5 kg 15 kg 170 kg
Surface treatment agent for cleaning and wiping eva, pvc, pu soles and thermo surfaces before bonding with appropriate adhesive. It should be used at least 10-30 minutes prior to adhesive application. 1 ltr
Silicone screen printing ink Ink and catalyst two components Colours: We can supply inks to international colour guide shades as well as providing a specialist colour matching service. CodeRGBHexHexadecimal color swatch Black5143361#332b24 Black 0961170161150#aaa196 Black 2595128#3b331c Black 3414638#292e26 1kg/bottle or as customers¡¡¥ requirement.
It apply to kitchen & bathroom countertops, hotel worktops . It can fabricate a seamless benchtop, sink and splashback package, offering a hygienic solution that is well-suited to kitchens, food preparation areas, healthcare and bathroom environments as an alternative to stone, granite and marble benchtops. Solid surfaces adhesive are also ideal for bathroom vanity tops with integrated basins. The introduction of adhesive Chma600 is dual-component, 10:1 ratio, 100% reactive adhesive, designed for seaming and jointing acrylic solid surfaces and other surfacing materials containing densified polyester sheet, thermoplastic plastic, grp, aluminium alloy.
Appearance white or pale yellow granular Melting Point( ) 55.0 ~ 80.0 Ash content %£© ¨Q0.10 Volatile Loss (%) ¨Q0.50 Color of solution(440nm) (%) ¨R97.0 Color of solution(500nm) (%) ¨R99.0 Assay ¨R99.0 TANCALS 622 is used in light aging inhibition of polyethylene ,polypropylene, polyurethane, metaformaldehyde, polyamine and polyester,also in ABS and engineering plastics. 20KG/PC
