;Key Features .Two-part : mixture addition type silicone adhesive 2.Low hardening shrinkage 3.Excellent electrical insulation in high temperature and stability 4.Good waterproof and moisture resistance 5.Excellent flame resistance, UL No: E34099 ;Typical Applications Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc. ;Technical Data Table PROPERTY STANDARD/UNITS VALUE of SI2230 ---- ---- PART A PART B Color Visual inspection white / black viscous liquid white viscous liquid Viscosity 27;C, cps 6;¨¤500 6;¨¤500 Density 27;C, g/cm3#6;¨¤0.05#6;¨¤0.05 Mixture ratio Mass ratio A:B=00:00 Viscosity of mixture 27;C, cps 6;¨¤500 Operation time 27;C, min 60¨¤0 Cure condition RTV/HEAT 27;C/ 4 hour;#7;C/ 30min Cured appearance ---- White/ Gray-black elastomer Hardness Shore A 56;¨¤5 Thermal conductivity W/mK 0.80 Linear expansion coefficient K-, ppm 300 Dielectric strength kV/mm, 27;C Y20 Volume resistance DC500V, ohm-cm .¨¢05 Loss factor MHz 0.009 Dielectric constant MHz 3.00 Application temperature C -60~200 Flame resistance UL-94 V-0 Part A--0 KG/Bucket, Part B--0 KG/ Bucket.