Adhesive glue is made of MDI , HDI, plasticizer, polyther, antistalin, oxygen absorbent etc
one component environmental protection PU adhesive for paving applies to air permeability and compound running tracks and courts
Environmental Protection PU Adhesive for Rubber Tiles
Packaging: 200kg/drum galvanization iron drums
Delivery Detail: 7days
Primer for asphalt and concrete base
MDI based
No bad smell
One component
PU adhesive is used for rubber tiles, there's no stimulating odor during process
Description CS-266 is solvent-free moisture curing PU adhesive. CS-266 temperature for foam or plastic, and products have properties as mentioned below : 1. Great curing speed. 2. Great bonding strength. 3. Great hydrolysis resistance. 4. Great weather resistance. 5. Great chemical resistance. Operation 1. CS-266 can be used by roller or knife coating. 2. After coating on the foamâ??s surface, then lamination stick with rollers. 3. Pressing the foam/foam at room temperature about 180 mins approximately, and initial binding strength can be obtained.
Adipic acid is a synthetic fiber, nylon 66, nylon engineering plastics, polyurethane foam, synthetic leather (PU), the main raw material of synthetic rubber and film, also can be used in medicine, pesticides, spices, such as the production of adhesives and soldering flux. Packaging & Shipping Logistics transportation methods can be divided into various ways according to the different transportation means. Different transportation ways had different features.We will consider wholelly and decide according to cargo situation,cargo type,delivery period,transportation cost. Iron drum & plastic drum packaging 1200kg/drum 850kg/drum 200kg/drum&plastic drum 180kg/drum&plastic drum 25kg/plastic drum&Cardboard bucket Plastic bag & kraft paper bag 1200kg/bag 50kg/plastic bag 25kg/plastic bag&kraft paper bag
Supplier: 1) sealants: advance ms polymer, polyurethane (pu), structural, weatherstrip sealants. 2) adhesives: pur wood, epoxy, semi structural adhesives. 3) coatings: waterproofing, underbody coatings. 4) diy: diy seals
Penoflex Shelf life - min. 12months Tack free time - max. 18 minutes Can be cut - max. 4 hours Completely cured - max. 10 hours Density - 20 - 25kg/m3 Fire class -b3 - din 4102 Flash point of cured foam - 400ªc Tensile strength - 11n/cm2 - bs 5241 Compression at 10% - 5n/cm2 - bs 4370 Allowed deformation - max. 7% Volume decrease - max. 0% Expanding volume - max. 30% Thermal conductivity - astm c518 - 0, 03w/m+k Temperature - long-term - 50 a + 90ªc Resistance of cured foam - short-time - 65 a + 130ªc The values specified were obtained at 23 ªc and 50% relative humidity, unless otherwise specified.
1.MDI/HDI one component polyurethane binder. 2.100% eco-friendly. no harm,no poison PU Adhesive is used to pave rubber flooring and make rubber tiles, such as athletic field, sports courts, children playground, walking way, park, etc. Suggested ratio of adhesive and SBR is 1:7, adhesive and EPDM is 1:5. With 20-30% air humidity, it needs 2 hours for curing; while it reaches 75%, construction is not recommended. Normal packing is 200kg/barrel, customized packing is also allowed. It applies to air permeability and compound running tracks and courts. It applies to make rubber tiles, which are used for paving kindergartens, excise yards and gyms.
Product Name Diphenylacetonitrile / Benzene-acetonitrile, alpha-phenyl CAS NO. 86-29-3 Appearance Colorless Liquid Purity 99% Density 1.1061 Melting Point 71-73 �°C Boiling Point 181 �°C/12 mmHg Flash Point 120 �°C Refractive Index 1.5850 Vapor Pressure 21.3 hPa (190 �°C) Acidity Coefficient (pKa) 9.30�±0.10 Application Chemical raw materials;Amines Usage 1. It can be used as a herbicide, used for turf prevention and control of young grasses before germination, used for synthesizing isocyanates, and further prepared into UV coatings, PU paints, transparent elastomers and adhesives, etc. 2. Used in polyamide and epoxy resin industries Use as an intermediate in organic synthesis. 3. In medicine, it is used to produce gastric amine, phenethylpiperidine, and other drugs such as pain relief. Storage Keep in dark place,Inert atmosphere
Hot melt glue for book binding Paper weight: 60-120gram HM8030 120-157gram HM8030W ï¼?157 gram HM 8216 It's designed for use in bookbinding side gluing for meidum to high speed perfect binding line or standalone rotary binder, it is formulated with good adhesion and thermal stability, long open time and good flow property, light clear yellowish abd is suitable for bonding printed, varnished or BOPP laminated paper.
Surface treatment agent for cleaning and wiping eva, pvc, pu soles and thermo surfaces before bonding with appropriate adhesive. It should be used at least 10-30 minutes prior to adhesive application. 1 ltr
Sprayable Adhesive System.
