The system is composed of panel, stringer and pedestal etc . The stringer and pedestal that is vertically adjustable are connected together with screws, which constitute these cured bottom bearing system. The panel was inlaid in the square lattices enclosed by stringers. The panel is made of good quality cold-rolled steel sheet, which is punched, stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. Inside of the panel is filled with foamed and pure cement. The surface is stuck with anti-wear and fireproof high pressure laminate (hpl) . Size:600*600*30 mm , 13kgs/pcs
Ht 600/610 oa raised access floor is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. There is foaming cement fully filled, with corner-lock holes punched in four sides of the panel. Carton&pallet
Gamaflor pac system combines the quality and hardness of polygroup raised floor systems; it is made of a core of high density chipboard panels finished with different floor covering possible. It is perfect acoustic and waterproof flooring, comfortable to walk and innovation aesthetic. Gamaflor pac is ideal for different applications like offices, airports, data center, museums, casinos, libraries, military areas, … With this system you can obtain an easy access to facilities that they are under the flooring, all the panels are independent and easy to remove. Gamaflor pac system is possible to do in different heights between 90mm to 1 pallet contain 56 pcs of panels
General Information * Panel dimensions: 600mm x 600mm x 30mm/35mm thick * Material: Calcium Sulphate, mineral, etc * Four sides are protected by edge trim * Stringer is connected to pedestal head with screws and pedestal is sticked to the ground . Covering Options * Plastic (Conductive) finish * Galvanized steel finish * HPL finish . Applicaton Area * Calcium sulphate panels with plastic finish and galvanized steel finish are applicable in offices with the finished floor height from 80mm to 200mm * Calcium sulphate panels with HPL finish is applicable in computer rooms with the finished floor height from 150mm to 600mm.
Perforated panel Many types of "Huatong" Aluminium perforated panel shouldbe available for your choice. With 1024 pieces or 1280 piecesconcave holes, perforated panel of 1024 holes supplies the airflow rate of 18.09%í½27.02% and the air flow rate of 1280 holesis 22.61%í½33.77%.They can meet the air flow requirements ofcomputer rooms and clean *****, Huatongaluminium perforated panels assures the free interchangewith other panels. Advantages 1. Elaborated Made 2. Class A construction material (incombustible) 3. High loading performance, Low deflection 4. Recycling, economical 5. Easy for holes opening 6. Acceptable static dissipative performance 7. Precise holes opening, concave design.
"HUATONG" OA access floor is corner supported type. The panel is put onto pedestals and one corner fixed to one pedestal. The floor system is composed of panel, pedestal, gasket and so on. Each panel can be moved freely and can be interchanged with other panels. We source high quality cold rolling steel from Bao Steel. Bend top steel to bottom steel, then rivet joint the two steel. This kind of joint strengthens the border intensity and conquers the disadvantage of split of the joint. With this technology, the folded border will not warp easily and becomes an integrative part of the panel. It's the advantage any other OA floor can not reach. OA floor has low requirement to the flatness of ground. It's no need to do anything included making level of the ground before installation. Baring a 20KN power for 1 minute, the pedestal is perfectly well as it was. Pedestal head and base are galvanized to avoid rust and to ensure the floor system operates well. With an adjustment of 20mm of the pedestal, it makes the floor system flat with scraggly ground. OA Floor has a perfect loading performance, stability and durability. It's nonflammable fire proof Class A material.
Raised access floors - wooden access floor - calcium sulphate floors - aluminum raised floor - concrete raised floors - pedestal Carton/ crate
Air-flow access floor 600-600-30/35mm
600x600x38 mm high density chipboard. Top and bottom coated with aluminum foil, the edge coated with hard PVC band. Raised access floor with out pedestals. FOB ISTANBUL
Metal raised floor : Description: designed specially for computer & equipment room with hpl/pvc laminates , etc which have been throughly tested. The finish has many different colors, and has an electrical resistance range of 2.5×104 to1×106ohms or 1×106 to 2×1010ohms(when tested at 20%rh) It is classified as two types, one is with black edge, the other is without black edge.The outside of the raised floor is made of high quality zinc cold steel sheet, the top is superior zinc cold steel sheet of shanghai baosteel, and the bottom is superiorly deep-strech zinc cold steel sheet .Advanced spot welding technical structure is applied to the top and bottom of the raised floor, and in the middle is filled with lightweight cement of special this way, the fnished products feature high strength and durability. Character: 1).Designed specially for computer room, control rooms, etc 2).The raised floor consist of following parts" A)30mm or 35mm thickness cement core panel B)4 pieces of black pvc stripps along the side of panel C)covering:hpl /pvc /ceramic D)pedestal, stringer, screws 3).Light cementitious fill makes panel solid and quite 4).Completely non-combustible;class a flame spread and smoke development rating 5).Easy and quick accessibility, resist pollution, easy to clean, durable {verified buylead}
HT Antistatic Access Floor is made of good quality cold-rolled steel sheet with foaming cement fully filled. The surface is stuck with High Pressure Laminate (HPL) or Conductive PVC tile. The whole system is composed of floor, pedestal and stringer.
Bare steel panel cementitious infill 600 mm x 600 mm x 35 mm with maximum height 200 mm pedestal. Pallet of 28 nos / 56 nos panels. The pedestals are 50 nos in carton boxes.
Ht hpl/pvc raised access floor is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. There is foaming cement fully filled. The surface is stuck with high pressure laminate (hpl) or pvc tile. The borders are trimmed with conductive rubber edges. Carton&pallet
Raised floor is widely used for data center,server room,bank,computer room,school library. Wires can go under the floors.It is convenient and easy to install and change.
We offer all types of raised floor or access floor & perforated tiles for server room and Datacenter. Raised access floor offered by us are calcium sulphate raised access flooring, woodcore type raised flooring, and encapsulated type raised floor system. Raised flooring system offered by us is anti static floor. We also offer LINDNER raised floor made in Germany. LINDNER access floor offer LIGNA and NORTEC type raised floor. Our raised floor has following features: 1) Available in calcium sulphate, woodcore and encapsulated type. 2) Our raised flooring has high load bearing capacity. 3) Fire resistance capacity up to 60 minutes. 4) Galvanized steel sheet provided at bottom of each raised floor tile. 5) Raised floor panel is less affected by variation in humidity and temperature. 6) It anti static floor. 7) Raised floor is environmental friendly since no Volatile organic components not used. 8) It is totally recyclable. Brands: LINDNER raised floor, LIGNA raised floor, NORTEC raised floor. Raised floor is important component of server room and data center. This article going to discuss advantage of raised flooring in server room. Raised access floor system provides housing for electrical cables, air conditioner ducting, chilled water and refrigerant piping etc. Raised access flooring not only provides space but also provide easy excess to components under it for maintenance point of view. As Turnkey Data center solution provider, we offer best quality of raised access floor --------------------
Our Advantage: 1. High-quality with most competitive price; 2.Enviroment friendly and energy saving; 3.It is adjustable, the best height is 50mm, saving the space of room; 4.Light weight, small noise when working; 5.Main components, panel, trunk cover plate corner bottom plate. Materical Steel, Wood, Calcium Sulfate Specification 500*500mm, 600*600mm Supply Ability 5000 Square Meter/Square Meters Per Day Package Pallets For Panels Cartons For Accessories Products Certificate ROHS, CE, GSG, MOB, KS, VOC Infill Cement, Wood, Calcium Sulfate Finish Material Steel With Cement Inside, HPL
Gamaflor full steel system combines the quality and hardness of polygroup raised floor systems; it is made of a core of steel-cement panels finished with different floor covering possible. It is perfect acoustic and waterproof flooring. Gamaflor full steel is ideal for different applications like offices, airports, data center, museums, casinos, libraries, military areas, etc. With this system you can obtain an easy access to facilities that they are under the flooring, all the panels are independent and easy to remove. Gamaflor full steel system is possible to do in different heights between 60mm to 1 pallet contain 28 pcs of panels
General information: Panel dimendions:600mm*600*30(40)mm thick Material: high performance chipboard core Four sides are protected by edge trim Stringer is connected to pedestal head with screws and pedestal is sticked to the ground . Covering options: Pvc finish Hpl finish Galvanized steel finish . Application area Wood core panels are applicable in offices, computer rooms etc.
Huatong anti-static raised access floor panels are widely used in computer rooms. This access floor system has excellent anti-static performance. It can eliminate the static electricity produced by the computers when they are working and the stability of the computer will be maintained. Thus the life span of the computers will be prolonged. Meanwhile, raised floor panels will greatly facilitate the whole installation. The panels can be put directly on the rigid network system, which is made up of pedestals and stringers. The panel sizes are controlled with great precision, which assures the free interchange between panels. With convenient wire layout and various outlet boxes, the system can optimize the cabling in computer rooms.
Anti-static raised access floors Whole-steel structure, high mechanical strenghth, strong loading ability, shock resistant. The surface spray in electrostatic processes, lambency, hard-wearing, water-proof, fire-proof, dust-proof, corrosion-proof. Sticking with high pressure plywood(having excelent hard-wearing and anti-static feature, anti pollution, easily cleaned and beautified). High accuracy size, excelent interchangeabilty, flexible lassemble, convenient maintenance. It is easily cut, convenient to install accessories. The four sides are fixed, easily install. The bottom space is ventilated as airconditioner. It can load overweight equipment when you add up more pedestal. Conveniently disassemble, recycleable if you change another panel. When installing a electrical box, it must start a hole as per its specification.
