The system is composed of panel, stringer and pedestal etc . The stringer and pedestal that is vertically adjustable are connected together with screws, which constitute these cured bottom bearing system. The panel was inlaid in the square lattices enclosed by stringers.
The panel is made of good quality cold-rolled steel sheet, which is punched, stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. Inside of the panel is filled with foamed and pure cement. The surface is stuck with anti-wear and fireproof high pressure laminate (hpl) .
Size:600*600*30 mm , 13kgs/pcs
Raised access floors - wooden access floor - calcium sulphate floors - aluminum raised floor - concrete raised floors - pedestal Carton/ crate
Air-flow access floor 600-600-30/35mm
600x600x38 mm high density chipboard. Top and bottom coated with aluminum foil, the edge coated with hard PVC band. Raised access floor with out pedestals. FOB ISTANBUL
Metal raised floor : Description: designed specially for computer & equipment room with hpl/pvc laminates , etc which have been throughly tested. The finish has many different colors, and has an electrical resistance range of 2.5×104 to1×106ohms or 1×106 to 2×1010ohms(when tested at 20%rh) It is classified as two types, one is with black edge, the other is without black edge.The outside of the raised floor is made of high quality zinc cold steel sheet, the top is superior zinc cold steel sheet of shanghai baosteel, and the bottom is superiorly deep-strech zinc cold steel sheet .Advanced spot welding technical structure is applied to the top and bottom of the raised floor, and in the middle is filled with lightweight cement of special this way, the fnished products feature high strength and durability. Character: 1).Designed specially for computer room, control rooms, etc 2).The raised floor consist of following parts" A)30mm or 35mm thickness cement core panel B)4 pieces of black pvc stripps along the side of panel C)covering:hpl /pvc /ceramic D)pedestal, stringer, screws 3).Light cementitious fill makes panel solid and quite 4).Completely non-combustible;class a flame spread and smoke development rating 5).Easy and quick accessibility, resist pollution, easy to clean, durable {verified buylead}
HT Antistatic Access Floor is made of good quality cold-rolled steel sheet with foaming cement fully filled. The surface is stuck with High Pressure Laminate (HPL) or Conductive PVC tile. The whole system is composed of floor, pedestal and stringer.
Bare steel panel cementitious infill 600 mm x 600 mm x 35 mm with maximum height 200 mm pedestal. Pallet of 28 nos / 56 nos panels. The pedestals are 50 nos in carton boxes.
Ht hpl/pvc raised access floor is made of good quality cold-rolled steel sheet, which is stretched, spot-welded, and coated with epoxy powder after having been phosphoreted. There is foaming cement fully filled. The surface is stuck with high pressure laminate (hpl) or pvc tile. The borders are trimmed with conductive rubber edges. Carton&pallet
Anti-static raised access floors Whole-steel structure, high mechanical strenghth, strong loading ability, shock resistant. The surface spray in electrostatic processes, lambency, hard-wearing, water-proof, fire-proof, dust-proof, corrosion-proof. Sticking with high pressure plywood(having excelent hard-wearing and anti-static feature, anti pollution, easily cleaned and beautified). High accuracy size, excelent interchangeabilty, flexible lassemble, convenient maintenance. It is easily cut, convenient to install accessories. The four sides are fixed, easily install. The bottom space is ventilated as airconditioner. It can load overweight equipment when you add up more pedestal. Conveniently disassemble, recycleable if you change another panel. When installing a electrical box, it must start a hole as per its specification.
Size;600*600mm Resflor Introduction of Products Advanced technology, imported high quality chipboard base material or MDF base material tile could be HPL or PVC ceramics (granite), Four sides: conductive regular. Bottom panel: aluminum foi or galvanized steel, Stringer: pressure forming and or conductive gum cover, lead screw could adjust height. Characteristics 1.Strong wearability, non-bubble, no degumming 2.Strong design ability, pressurization, good loading capacity; 3.Appearance is beautiful; 4.Easy to fix, convenient for wires.
