Find Verified 92%alumina Balls30Mm 120Mm Suppliers, Manufacturers and Wholesalers

Typical properties:

Alumina content: 92% alumina content: 95%
Volume density: 3.6g/cm3 volume density: 3.7g/cm3
Hardness (mohs): 9 hardness (mohs): 9
Wear rate: 0.02% wear rate: 0.005%
Water absorption: 0.01% water absorption: 0.01%



Applications:
Grinding media for industries of sanitary ceramics, refractory, cement and paint.

Typical properties:

Alumina content: 92% alumina content: 95%
Volume density: 3.6g/cm3 volume density: 3.7g/cm3
Hardness (mohs): 9 hardness (mohs): 9
Wear rate: 0.02% wear rate: 0.005%
Water absorption: 0.01% water absorption: 0.01%
Applications:
Grinding media for industries of sanitary ceramics, refractory, cement and paint.

We are exporter of Calcined Alumina.

According to different requirements, five series of products have been formed, including dry pressing, hot die casting, refractory, casting and setting, structural ceramic granulator, etc. It can be widely used in electronic equipment, structural ceramics, refractories, wear-resistant materials, polishing materials and other industries.

We are supplier and exporter of Calcined Alumina.

Calcined alumina can be used in the polishing of different alumina products(mainly used in middle, fine polishing).It is also widely used in high-class aluminium refractory material, unshaped refractory materials, high aluminium ceramic product and advanced coating, etc, . Item Al2o3 % Na2o % Sio2 % Fe2o3 % D50 A4m 99.8 0.1 0.05 0.02 3.1

Alumina (Al2O3), the industrial Al2O3 is prepared from alumina (Al2O3, 3H2O) and hard alumina, and the Al2O3, which is high in purity, is usually prepared by chemical methods. Al2O3 has many isomorphic crystals, and there are currently more than 10 known types, mainly three types of crystal, namely gamma-al2o3, beta-al2o3, alpha-al2o3.Which structure is different, with different properties in high temperature above 1300 s almost entirely into alpha Al2O3.

Applications:
Use to manufacture gypsum panel or building plasters
Use to manufacture cement
Use as fertilizer
Use by chemical factories

Production sizes:
0-50 mm
50-150 mm
50-250 mm

GRINDED GYPSUM is also available in 300 mesh size.

Grinding, blasting, and cutting processes, as well as the production of refractory materials, all employ alumina. We are proud to be the world's largest fused alumina producer and supplier. It is also known as fused aluminium oxide

Alumina is found in the regions of Odisha, West Bengal, Kerala, Uttar Pradesh, Maharashtra and Tamil Nadu.
There are several physical properties of alumina. It is high in hardness with the value of 9 on Mohs scale. It has sharp-edged grains, a high load bearing capacity, strong shock resistance, and thermal and chemical stability, besides their superior hardness.
Alumina, or aluminium oxide (aluminum oxide), is better known in the mineral world as corundum with the chemical formula Al2O3
Alumina has widespread usage in several industries in refractories, sandblasting and abrasives to mention a few. Grinding, machining, blasting, cutting, and the manufacturing of shaped and unshaped refractory materials all employ fused aluminium oxide grits.
We offer innovative, brilliant quality alumina mineral with both macro and micro sized that could be used for a wide range of applications. We can add refining procedures to our regular production of alumina mineral to suit the bespoke requirements of various industries and application domains.
These various industries are ceramics, sand casting, tiles, enamels, laminates & paints, industrial coatings, abrasives, blasting, concrete & resin components, refractories, insulators and heat conductive to name a few.

Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur.
D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05.
D2 Automotive Fuel Oil (ago).
D6 Virgin Fuel Oil.
Hsd Diesel High Speed 500ppm En90.
Diesel En590 Euro4 Gost 52368.
Pms Premium Motor Spirit
Jp54 (ts1) Gost 10227-86.
Jet Fuel A1 Gost 10227-86.
Marine Fuel Oil Cst 180-280-380.
Espo (siberia Pacific Oil) Crude Oil Api 34,7.
Lco (light Cycle Oil).
Mazut Mt100 Gost 10585-75 And 10585-99.
Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93.
Lpg 50/50 Propane/butane - 70/30 P/b.
Lng 5542-87 By Iso Containers Etc.
Gasoline All Types (87-89-92-95).
Bitumen/asphalt All Grades.
Fertilizers Urea, Dap, Etc

Product Description :
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils..

Price of product ( USD price or FOB price) :
20.000 MT monthly market price.
100.000 MT monthly market price Less 5%.

Product origin : Russia and Non Russia

Key Specifications/Special Features :
All types/grades of Fuels, Gas, Oil are available for supply.

Many commercial names for oils, fuels, gases, etc. are used in the market.
To avoid misunderstanding basic details of specifications needed by buyer are mandatory.

Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs.

Minimum Order Size and Packgaing details :
Bulk in tanker vessels.
Tanks 20 MT.

-White Charcoal, also known as Binchotan, is a type of hardwood charcoal that has traditionally been produced in Japan. It is called White charcoal because of its light color and unique benefits that create economic value compared to traditional black charcoal.
-Binchotan is the purest charcoal on earth by the highest carbon proportion (more than 92%) and is completely odorless, and smokeless when burning. White Charcoal is more difficult to ignite than black charcoal; however, it burns hotter and longer.
When hitting the pieces together, it gives a light metallic sound. The white charcoal doesnot break into small pieces while burning.

USAGES
Food grilled over white charcoal retains its natural flavor and moisture because it burns cleanly and without flames. It is popular in high-end restaurants and mostly in Korea and Japan. In addition, binchotan has many uses such as water purification, exhaust filter, deodorant, skin care, metallurgy, used in battery manufacture...

S.N CAS No. Item
1 63148-62-9 Silicone oil
2 77-92-9 Citric acid
3 9003-05-8 Polyacrylamide
4 7664-39-3 Hydrogen fluoride
5 9000-11-7 Carboxymethyl cellulose
6 7757-82-6 Sodium sulfate
7 68-04-2 Sodium citrate
8 7664-38-2 Phosphoric acid
9 1310-73-2 Sodium hydroxide
10 497-19-8 Sodium carbonate
11 139-33-3 EDTA disodium
12 67-63-0 Isopropanol
13 25322-68-3 Polyethylene Glycol
14 144-55-8 Sodium bicarbonate
15 4404-43-7 Fluorescent Brightener 28
16 7758-29-4 Sodium tripolyphosphate
17 7601-54-9 Trisodium phosphate
18 532-32-1 Sodium benzoate
19 5329-14-6 Sulfamic acid
20 142-91-6 Isopropyl palmitate
21 7782-99-2 Sulfurous Acid
22 9014-01-1 Subtilisin (Compound proteinase)
23 1344-09-8 Sodium silicate
24 6834-92-0 Sodium metasilicate
25 7720-78-7 Ferrous sulfate

Item Index
Appearance White Granule/Prills
Content 92%-98%
Acidity(Formic acid) 0.03%
Methanol Content 1%
pH 3.0-7.0
Iron Content 0.0002%
Ash 0.05%

Commodity: Calcium carbide
Molecular formula:CaC2
Molecule Weight: 64.10
H.S code:28491000
CAS: 75-20-7
UN NO.1402
HAZARD CLASS: 4.3

Application: It is a kind of basic material for organic synthesis, and can produce acetylene gas for cutting and welding, also be material for calcium cyanamide.

Appearance: Grey, black solid, purple when its purity is more than 90%.
Granule:4-25mm / 15-25mm / 25-50mm / 50-80mm /25-80/ 80-120mm

Package: Net in 100kg or 50kg new iron drums with nitrogen.

Specification: GB10665-2004

Specification Superfine Grade First Grade Second Grade
Gas yield(L/kg)L/kg 305 295-305 285-295
PH3 content in acetylene (PH3%) 0.06 0.08 0.08
H2S content in acetylene (H2S%) 0.1 0.1 0.1

Loading weight in 1 x 20fcl:22.5mt

[Technical Indicators]
1. Industrial grade
Indicator Name/Indicator Value Powdered Products (F) Needle Products (Z)
Level 92 Level 93 Level 95 Level 92 Level 95
Appearance White or light yellow powder, without caking White or yellowish needle-like, without lumps
Active matter,% 92.0 93.0 95.0 92.0 95.0
Free oil,% 1.2 1.2 1.2 2.0 1.5
Inorganic salt,% Sodium sulfate 5.8 4.8 2.5 4.8 2.5
Sodium chloride 0.15 0.15 0.15 0.15 0.15
Moisture,% 2.0 2.0 2.0 4.0 3.0
PH value (1% aqueous solution) 7.5-9.5 7.5-10
Whiteness (WB), 90

2. Toothpaste grade
Indicator Name/Indicator Value Toothpaste Grade (Y)
(I) Level (II) Level (III) Level
Appearance White or yellowish powdery or needle-like, without caking
Active matter,% 95.0 93.0 93.0
Free oil,% 1.2 1.2 1.2
Inorganic salt,% Sodium sulfate 2.5 3.2 4.0
Sodium chloride 0.15 0.15 0.15
Moisture,% 2.0 2.0 3.0
PH value (1% aqueous solution) 8-9.3 8-9.3 8-10
Whiteness (WB), 90
Foaming capacity/mm 180
Heavy metal (as Pb)/ (mg/Kg), 15
Arsenic content (as As)/ (mg/Kg), 3
Total bacterial count/ (CFU/G), 100
Total number of molds and yeasts/ (CFU/G), 100
Fecal coliforms/G Not to be detected
Pseudomonas aeruginosa/G Not to be detected
Staphylococcus aureus/G Not to be detected
 
3. Latex grade
Indicator Name/Indicator Value Latex grade (powder, needle, liquid)
Aggregate grade Seed level Liquid K12
Appearance White or yellowish powdery or needle-like, without caking Light yellow transparent liquid
Active matter,% 94.0 92 28.5-30.5
Free oil,% 0.8-1.0 1.5-2.0 1.5
Inorganic salt,% Sodium sulfate 3.0 3.0 1.5
Sodium chloride 0.15 0.15 0.05
Moisture,% 3.5 3.5 -
PH value (1% aqueous solution) 8-10 7.5-9.5
Whiteness (WB), 90 -
Color Klett (30% active), - 60

4. Reagent grade
Indicator Name/Indicator Value Reagent grade
Level 99% Level 97%
Appearance White flaky crystals White powder
Solubility (1%, alcohol) Completely dissolved
Solubility (10%, aqueous solution) Completely dissolved
Chroma APHA (20%, deionized water), 15   -
Active matter (%), â?¥ 99 (on dry basis) 97
Petroleum ether soluble matter (%), 0.2 1.0
Sodium sulfate (%), 0.5 1.5
Sodium chloride (%),
Moisture (%), 1.0 2.0
PH value (1% aqueous solution) 6.0-8.0 6.0-11
Phosphate, 1ppm -
Lead (Pb), 2ppm
Iron (Fe), 1ppm
Nitrogen, 5ppm -
Arsenic (As), 0.1ppm
Fraction content (%), 99.0
Absorbance (3%, deionized water) 230nm 0.4
260nm 0.1
280nm 0.1 -
410nm 0.01

English name: Calcium Nitrite
Molecular formula: Ca(NO2)2
Molecular weight: 132
CAS NO. 13780-06-8
HS CODE: 28341000
UN NO.: 2627 5.1 type oxidizing agent
Properties: White powder without crystal water. It is tasteless and toxic. Easily in water and presents light yellow solution.

Specifications:
Item Superior grade First grade Second grade
Calcium Nitrite[Ca(NO2)2 as dry basis]% 94 92 90
Calcium Nitrate[Ca(NO3)2 as dry basis]% <4 <5 <6
Calcium hydroxide[Ca(OH)2 as dry basis]% <1.0 <1.0 <1.0
Moisture % <1.0 <1.0 <1.0
Water insoluble matter % <0.6 <1.0 <1.0

Uses:
1. Antifreezing agent.
2. Inhibitor of steel in concrete.
3. Can prepare compound early strength agent.
Packing 25/50/1000KG woven bag lined with plastic or according to customer's requirements.

We deals in the following Chemicals :-

Alumina Silica ( Cenosphere ) Powder
Fly Ash Powder
Ilmenite (Synthetic Rutile)
Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide )
Barite Powder, Barite Ore
Dolomite Powder
Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets
Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits
Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay
Calcium Carbonate Powder
Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells

Calcined Bauxite:

Calcined Bauxite is obtained by calcining (heating) superior grade Bauxite at high temperature (from 850 oC to 1600 oC). This removes moisture thereby increasing the alumina content. Compared to an alumina content of about 57 % to 58 % in raw Bauxite, Calcined Bauxite has an alumina content of 82 % to 86 %. The heating is carried out in rotary kilns. Calcination is done at different temperatures ranging from 850 oC to 1600 oC depending upon the customer’s application.

We export Calcined Bauxite for various applications such as refractory bricks, abrasives, steel polishing, etc. We provide consistency in quality and availability of Calcined Bauxite at extremely competitive prices.

Applications of Calcined Bauxite:

Refractory Grade Calcined Bauxite (CB - I and CB - II Grade) : To make refractory grade, Bauxite is thermally treated at 1600 oC to produce Calcined Bauxite where the Alumina content is mostly above 82%.

Brown Fused Alumina, Proppants and Road Surfacing : To make the above grades, Bauxite is thermally treated at 1000 oC - 1200 oC to produce Calcined Bauxite where the Alumina content is anywhere between 80-88% depending on the requirement.

Minimum Order Quantity : 1 Containers

Raw Bauxite:

Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries.

About Raw Bauxite:
The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC).

About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same.

Application & Uses of Bauxite:
Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in :
- Aluminium
- Cement
- Chemical
- Blast Furnaces
- Iron/Steel Ladles, etc.

Advantages of Artha Bauxite:
Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.

Fly Ash:

Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.

The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.

Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.

- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.

- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.

- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.

Minimum Order Quantity : 1 container

TiO2>92%

Minimum Order Size and Packgaing details :

MOQ:24 MT / 20 feet container

Package: 1MT/ jumbo bag