INDUCTION MELTING FURNACE Model:GW-5-4000/0.5J Rated Power:4000KW Capacity:5Ton Input Voltage:1000V(12 Pulse) Input Current:2300A Melting rate:5T/H Power Consumption:570-630kw.h/T Brand:SEMC
INDUCTION MELTING FURNACE Model:GW-5-4000/0.5J Rated Power:4000KW Capacity:5Ton Input Voltage:1000V(12 Pulse) Input Current:2300A Melting rate:5T/H Power Consumption:570-630kw.h/T Brand:SEMC
The product is mainly used for melting cast iron, cast steel, stainless steel and copper, aluminum, alloy etc. It also can be used with cupola, eaf, lf for heating molten iron and molten steel.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
2.Production Description: 1)Medium Frequency Induction Furnace for melting 2)Full digital control system with high accuracy 3) Melting steel, iron,stainless steel,copper,aluminium 4)0.15-20 tons capacity 5) Constant power output, speedy melting, good electricity saving efficiency. 3.Usage: Medium Frequency Induction Furnace Mainly used in melting steel, iron, copper, aluminum and alloy, is with high melting efficiency, good electricity saving effect, good metal component uniformity, less burning loss, speedy temperature rise, easy control of temperature, is suitable to all kinds of metal melting. 4.Characters and Advantages: 1) Constant power output, speedy melting, good electricity saving efficiency. 2) Zero-voltage sweep-frequency style start, adapts to requirement of frequently start. 3) Comprehensive protection functions, such as overcurrency protection, overvoltage protection, current-limiting protection, voltage-limiting, water-break protection, and default protection, equipment runs reliably under premise of melting speed guarantee. 4) Easy to operate, suitable for all casting process. 5. Package: Plywood cases and nude.
1.Production Name: Medium Frequency Induction Furnace 2.Production Description: 1)Medium Frequency Induction Furnace for melting 2)Full digital control system with high accuracy 3) Melting steel, iron,stainless steel,copper,aluminium 4)0.15-350 tons capacity 5) Constant power output, speedy melting, good electricity saving efficiency. 3.Usage: Medium Frequency Induction Furnace Mainly used in melting steel, iron, copper, aluminum and alloy, is with high melting efficiency, good electricity saving effect, good metal component uniformity, less burning loss, speedy temperature rise, easy control of temperature, is suitable to all kinds of metal melting. 4.Characters and Advantages: 1) Constant power output, speedy melting, good electricity saving efficiency. 2) Zero-voltage sweep-frequency style start, adapts to requirement of frequently start. 3) Comprehensive protection functions, such as overcurrency protection, overvoltage protection, current-limiting protection, voltage-limiting, water-break protection, and default protection, equipment runs reliably under premise of melting speed guarantee. 4) Easy to operate, suitable for all casting process. 5. Package: Plywood cases and nude. Plywood Box.
1.Production Name: Intermediate Frequency Induction Melting Furnace, Steel Shell 2.Production Description: 1)Steel Shell Intermediate Frequency Induction Furnace for melting 2) Steel shell hydraulic tilting 3) Melting steel, iron,stainless steel 4)0.15-12 tons capacity 3.Usage: Medium Frequency Induction Furnace Mainly used in melting steel, iron, copper, aluminum and alloy, is with high melting efficiency, good electricity saving effect, good metal component uniformity, less burning loss, speedy temperature rise, easy control of temperature, is suitable to all kinds of metal melting. 4.Characters and Advantages: 1) Constant power output, speedy melting, good electricity saving efficiency. 2) Zero-voltage sweep-frequency style start, adapts to requirement of frequently start. 3) Comprehensive protection functions, such as overcurrency protection, overvoltage protection, current-limiting protection, voltage-limiting, water-break protection, and default protection, equipment runs reliably under premise of melting speed guarantee. 4) Easy to operate, suitable for all casting process. 5. Package: Plywood cases and nude. Plywood cases and nude.
Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10
1.Induction heating melting furnace use crucible high temperature to heat metal.then can melt,refine,casting,etc production. 2.Can melt platinum, rhodium and palladium,gold,silver,copper,steel,aluminium, Activated carbon, gold dust sands, electrolysis mud, gold and silver powder, tin ash tin slag etc. 3.Induction heating melting furnace can melt weight from 0.001KG--500KG per time.melting time from 5-40 minutes. max temperature will be 1500C--2000C. 4.Induction heating melting furnace have fixed type,push out type,auto pouring type,furnace up down moving type.
Ramming mass is commonly used in metallurgy, building materials, non-ferrous metal smelting, chemical, machinery and other manufacturing industries. Ramming mass is widely used in non-core intermediate frequency furnace and core induction furnace. As an intermediate frequency furnace ramming material, refractory ramming is applied to melt gray cast iron, nodular cast iron, malleable cast iron, vermicular cast iron, and cast alloy steel; to melt carbon steel, alloy steel, high manganese steel, tool steel, heat resistant steel, stainless steel, molten aluminum and its alloys; to melt red copper, brass, white brass, bronze and its alloys, etc. Induction furnaces are used for melting cast iron, mild steel and various alloy steels in foundries and making of steel in mini steel plants using sponge iron The refined high silicon, low iron quartz sand and quartz powder are selected and the fused quartz sand is added as the refractory material., with no slag, no crack, damp proof, convenience of repair, and the corrosion resistance, thus greatly improving the furnace service life span and the economic benefit.. Silica ramming mass can safely be used up to an operating temperature of 1600 deg C. Since it expands very little, it is superior to both alumina and magnesia refractories to resist thermal shocks Acid ramming material is the premixed ramming mass of the lining material. The acid ramming mass is used to smelt a series of metal materials such as ordinary steel and carbon steel. The lining practice best suited to a particular furnace depends upon the capacity and design of the furnace, operation practice adopted during making of a heat, and furnace output.
Gold Induction Melting Furnace This gold melting machine is designed for 2-10kg, which is suitable for melting precious metal such as gold, silver, copper, zinc, etc. With speedy melting time could be realized within 1-3 minutes. Based on the latest and most advanced IGBT induction technology, this small Gold Melting Kit can saves 15-30% energy than KGPS, 100% full load, with low power consumption. The power supply varies from 8kw-15kw for this series furnace. Power on open water faucet put ceramic crucible in the machineput metal in the cruciblepress heating switchpress stop switchtongs the crucible and pour the metal liquid. 4 kg gold melting furnace Attention: 1.Can't be water-break during using the machine. If happens by accident, it needs to pick up the crucible at once, or the heating coil will be damaged. 2. Don't press the heating switch without crucible. 3. Press stop switch first, then pouring the liquid after the metal melted. 4. If the work is finished everyday, please take away the crucible then shut off power. 5. When water flow indicator light is shut off, it stands for out of water or low water pressure. And now the machine will start the function of protection, the gold melting machine will stop heating.
Application of Medium Frequency Induction Copper Melting Furnace: 1.Non-ferrous and ferrous metals melting; 2.Precious metal melting, like gold, sliver, platinum; 3.Semiconductor material melting; 4.Metal alloy melting, like aluminum alloy, zinc alloy, copper alloy,etc. Main characteristics: 1.Light weight, small size. 2.Different shape and size of induction coil can be changed easily to heat different parts. 3.Mul-tidisplay functions, with displays of over current, over voltage, water failure, phase failure, etc. 4.Simple to operate, a few minutes is enough to learn it.
These are ideal for downstream users who wish to re-melt this residual form of aluminium in their own furnaces, and then cast it to produce a variety of end products. We supply primary and secondary Ingots and Billets from Middle East, Asia and Far East.
Medium frequency furnace.
Vacuum Induction Melting Furnace Introduction: As the most experienced Vacuum Induction Melting Furnace manufacturer in China, ShinTek Vacuum Induction Melting Furnace can be used for a wide of industries, can melting and pouring Ni-based alloy, special steel, precision alloy, NdFeB, Dysprosium metal, activated metal, super alloy, hydrogen storage material, magnetic material and so on… Vacuum Induction Melting Furnace Specifications: Model STVIM-10 STVIM-25 STVIM-50 STVIM-100 STVIM-200 STVIM-500 STVIM-1000 STVIM-1500 Working zone size 5*3*2 4.8*4*2.5 9.8*5*3.2 9.8*5.5*5.0 11*8.7*4.6 12.5*8*6 16*12*7.6 17*14*8.5 Load (KG) 10 25 50 100 200 500 1000 1500 Power 40KW 50/100KW 100KW 160KW 200/250KW 500KW 500KW 1000KW Voltage 300V 175V 375V 375V 375V 700V 700V 700V Frequency 4000Hz 2500Hz 2500Hz 2500Hz 1600Hz 1000Hz 500Hz 500Hz Max. temperature 1600? Temperature uniformity +/-5? Ultimate vacuum level (Cold) 6.7*10-3Pa Leakage rate =4Pa/h Remark: The Vacuum Induction Melting Furnace can be customized for your specific project, and also can be equipped with casting furnace for your melting and casting process. Vacuum Induction Melting Furnace features: (1) Vacuum Induction Melting Furnace – Patented hotzone design enable a high energy efficiency; (2) Vacuum Induction Melting Furnace – Suitable for most of metallurgy industries, can be customized for users; (3) Vacuum Induction Melting Furnace – Two heating system are available for choose, either thyristor frequency converter or IGBT power system. (4) Vacuum Induction Melting Furnace – Two feeding method for choose: Manual or Semi-continueous; (5) Vacuum Induction Melting Furnace – Friendly control system.
Battery capacity: 1800mah Product size: 77*51*91mm Induction distance: â?¤12CM Working current: 500mA Working frequency: 108KHz Bottle Capacity: 45ml Colour: Black / White Accessories Included 2X - Filter Pads 1X - C Charging Cable 75% alcohol is recommended
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Minimum Order Quantity: 1 Unit Melting Material: Silver Type Of Furnace: Induction Voltage : 220-380 V Melting Time : 30-35 mins Power: 10 KW to 100 KW Capacity: Available in 5 Kg,10 kg,15 kg,60 kg Warranty: 1 Year Duty Cycle : 100% Frequency : 50 - 60 Hz Some other important and useful qualities include: Power conversion efficiency Fast on/off switch time Less current and voltage stress on power devices A constant output of power despite input power fluctuations Reliable, easy to maintain and service Compact in size easy to install and simple to operate Additional Information: Production Capacity: 20
