Features
- 4 independent full-duplex channels
- Up to 11.2Gb/s data rate per channel
- MTP/MPO optical connector
- QSFP+ MSA compliant
- Digital diagnostic capabilities
- Up to 100m transmission on OM3 multimode ribbon fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0 to 70oC
- XLPPI electric interface
- Maximum power consumption 1.5W
- RoHS-6 compliant
Applications
- Rack to Rack
- Data Center
- Infiniband QDR, DDR and SDR
- 40G Ethernet
Features
- QSFP28 End: Compliant with QSFP28 MSA specifications
- SFP28 End: Compliant with SFP28 MSA specifications
- 4 independent duplex channels operating at 25Gbps
- AC coupled inputs and outputs
- 100 Ohm differential impedance
- All-metal housing for superior EMI performance
- Single power supply 3.3V, low power consumption
- RoHS Compliance
- Operating temperature range: 0ï?°C to 70ï?°C.
Application
- 100Gigabit Ethernet
- Infiniband EDR
- Serial Data Transmission
- Networking
- Storage
- Fiber Channel
GLsun QSFP-40G-SR4 Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for 40-gigabit ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. One version is each lane can operate at 10.5 Gbps up to 100m using OM3 or 300m using OM4 multimode fiber, another version is each lane can operate at 10.5Gbps up to 300m using OM3 or 400m using OM4 multimode fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Compatible Cisco Form Factor QSFP+
Max Data Rate 10.5Gbps Wavelength 850nm
Max Cable Distance 150m on OM4 MMF Connector MTP/MPO
Transmitter Type VCSEL 850nm Extinction Ratio 4dB
Media MMF Power Consumption < 1.5W
Power Supply Voltage 3.3V Operating Case Temperature 0C to +70C (Commercial)
40G QSFP+ SR4 100M MPO Optical Transceiver
Product Model:EQ854X-3MCD01
Data Rate:40G
Wavelength:850nm
Distance:100m
Connector:QSFP+
Fiber Type:MM
DDM:Yes
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: 10PCS/Tray
Features
1.High Channel Capacity: 40 Gbps per module
2.Up to 11.1Gbps Data rate per channel
3.Maximum link length of 100m links on OM3 multimode fiber Or 150m links on OM4 multimode fiber
4.High Reliability 850nm VCSEL technology
5.Electrically hot-pluggable
6.Digital diagnostic SFF-8436 compliant
7.Case operating temperature range:0 C to 70C
8.Power dissipation < 1.5 W
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface;
2.Switched backplane applications/Router/Server interface;
3.Other optical transmission systems
Package type: Individual package or 10pcs/package
Features
1. Â Compliant to the 40GbE XLPPI Â electrical specification per IEEE Â 802.3ba-2010;
2.Compliant to QSFP+ SFF-8436 Â Specification;Aggregate bandwidth of >40Gbps;
3.Operates at 10.3125 Gbps per  electrical channel with 64b/66b  encoded data;
4.QSFP MSA compliant;RoHS Compliant Part;Temperature range 0 °C to 70 °C;
5.Capable of over 100m transmission  on OM3 Multimode Fiber  (MMF)and 150m  on OM4 MMF;
6.Single +3.3V power supply  operating;Built-in digital diagnostic functions;
7.Utilizes a standard LC duplex fiber  cable allowing reuse of existing  cable infrastructure;
Applications
1.Ethernet/Fiber Channel/Switch to Switch interface
2.Switched backplane applications/Router/Server interface
3.Other optical transmission systems
912 40Gbps Qsfp+ Sr4 Transceiver Suppliers
Short on time? Let 40Gbps Qsfp+ Sr4 Transceiver sellers contact you.
Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability.
Features
- compliant with ieee802.3z
- gigabit ethernet standard
- compliant with ieee802.3ae 10gbase
- compliant with sonet oc-192 sr-1 sdh stm i64.1
- class 1 laser product complies with en 60825-1
- rohs compliant
Applications
- telecommunications
- datacenter
- network interface
- test and measurement equipment
QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density.
Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot.
Multi-mode Transceivers
Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver.
400G QSFP-DD SR8
The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA.
Single-mode Transceivers
Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance.
400G QSFP-DD DR4
The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD DR4+
The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD LR4
The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD Loopback
The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
Hot Pluggable QSFP+ form factor
Supports 41.25Gb/s aggregate bit rate
Multirate capability: 1.06Gb/s to 10.5Gb/s per channel
Maximum link length of 150m on OM3 MMF
Single MPO-12 receptacle
Power dissipation:
40G data rate with 4 CWDM lanes Mux/Demux design
Up to 11.1Gbps Data rate per wavelength
From 150m to 40km transmission on MMF/SMF
Electrically hot-pluggable
Digital Diagnostics Monitoring Interface
Compliant with QSFP+ MSA with LC connector
Case operating temperature range:0°C to 70°C
Power dissipation < 3.5 W
Compliant with CE,FCC,Rohs,REACH
Up to 4X10Gbps Data rate.Max link up to 100M on OM3 cable, and 150m on OM4 cable.High reliability 850nm VCSEL technology.Electrically hot-pluggable.Low power consumption.Low EMI design.
GLsun QSFP-100G-SR4 Optical Transceiver is an integrated transceiver module containing a micro-optic component and semiconductor material, and can implement optical-electrical conversion and electrical-optical conversion. The module is designed as a four-channel, pluggable, parallel, QSFP28 transceiver for 100Gbps fiber-communication. Each channel can operate at 25Gbps up to 70m on OM3 fiber. And the operating wavelength is 850nm. The optical interface uses an 12 fiber MTP(MPO) connector, and the electrical interface uses a 38 contact edge type connector. This product is compliant to 100GBASE-SR4 of IEEE802.3bm standard and SFF-8436 specification, and provides reliable long life, high performance, and consistent service.
100GBPS QSFP28 SR4 WITH DDM TRANSCEIVER
ITEM NO.:EQSP10A-3MCD01
DATA RATE:100G
WAVE LENGTH:850nm
DISTANCE:100M
CONNECTOR:MPO
FIRST:MM
DDM:YES
PRODUCT ORIGIN:China
SHIPPING PORT:Shenzhen
Features
� Up to 27.952 Gbps Data rate per channel
� Maximum link length of 100m links on OM3 multimode fiber
� High Reliability 850nm VCSEL technol ogy
� Electrically hot-pluggable
� Digital diagnostic SFF-8436 compliant
Ã? Compliant with QSFP28 MSA Â
Ã? Case operating temperature range:0°C to 70°C Â
� Power dissipation < 2.5 W
Applications
� Data center
� Infiniband QDR
� Fiber channel
Standard
� Compliant to IEEE 802.3 bm
� Compliant to SFF-8436
� RoHS Compliant.
Durable design that connects to any apple lightning mobile device
Optional clip for the ipad that provides additional support
Emv level 1 certified
Emv level 2 kernel sdk(optional)
Ce, fcc, rohs
Microusb for android
Android and ios sdk
Operates with iso 7816 microprocessor cards
Metal case
Sctl-sr4 is emv level 1& emv level 2 approved and uses dukpt key management and tdes/aes encryption to ensure smart card transactions are encrypted and transmitted securely to the host device.
GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Compatible Cisco Form Factor QSFP+
Max Data Rate 44.6Gbps Wavelength 1310nm
Max Cable Distance 40km Connector Duplex LC
Transmitter Type DFB CWDM Extinction Ratio 5.5dB
Media SMF Power Consumption
GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings.
Compatible Cisco Form Factor QSFP+
Max Data Rate 11.2Gbps Wavelength 1310nm
Max Cable Distance 10km at Single Mode Fiber Connector Single MPO
Transmitter Type DFB Laser Array Extinction Ratio 3.5dB
Media SMF Power Consumption
Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA.
Compatible Cisco Form Factor QSFP+
Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm
Max Cable Distance 10km link length Connector Duplex LC
Transmitter Type DFB CWDM Extinction Ratio 3.5dB
Media SMF Power Consumption
100Gbps QSFP28 SR4 with DDM Transceiver
Item NO.:EQSP10A-3MCD01
Date rate: 100G
Wavelength:850nm
Distance:100M
Connector:MPO
First:MM
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
Up to 27.952 Gbps Data rate per channelï¼?
Maximum link length of 100m links on OM3 multimode fiberï¼?
High Reliability 850nm VCSEL technologyï¼?Electrically hot-pluggableï¼?
Digital diagnostic SFF-8436 compliantï¼?Compliant with QSFP28 MSAï¼? Â
Case operating temperature range:0°C to 70°C�Power dissipation < 2.5 W�
Applications
1.Gigabit Ethernet 2.Fiber Channel 3.Switch to Switch interface
4.Switched backplane applications 5.Router/Server interface
6.Other optical transmission systems
40G QSFP ER4 optical transceiver module, support 40Gb/s and up to 40 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on.
40G QSFP+ ER4 40KM LC Optical Transceiver
Product Model:EQxx4X-3LCD40
Data Rate:40G
Wavelength:CWDM
Distance:40km
Connector:LC
Fiber Type:SM
DDM:YES
Place of origin: Made in China
Shipping Port: ShenZhen
Package type: Individual package or 10pc/package
Features
1.Transmission data rate up to 11.2Gbps per channel
2.QSFP+ MSA compliant
3.Compliant to IEEE 802.3ba specification for 40GBASE-ER4 links
4.4 CWDM un-cooled DFB lasers, using ITU G.694.2 wavelength grid at 1271, 1291, 1311Â and 1331nm
5.High Sensitivity APD-TIA with optical DEMUX
6.Up to� 40km reach over standard single mode fiber
7.Hot pluggable electrical interface
8.Operating case temperature 0 C to +70 C
9.3.3V power supply
10.RoHS 6 compliant lead free 11.ROHS Compliance.
Description
This product is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (4ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data.
The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.
The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.
Applications
1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface;
2.Switched backplane applications/Router/Server interface;
3.Other optical transmission systems
912 40Gbps Qsfp+ Sr4 Transceiver Suppliers
Short on time? Let 40Gbps Qsfp+ Sr4 Transceiver sellers contact you.
