40Gbps Qsfp+ Sr4 Transceiver

Features - QSFP28 End: Compliant with QSFP28 MSA specifications - SFP28 End: Compliant with SFP28 MSA specifications - 4 independent duplex channels operating at 25Gbps - AC coupled inputs and outputs - 100 Ohm differential impedance - All-metal housing for superior EMI performance - Single power supply 3.3V, low power consumption - RoHS Compliance - Operating temperature range: 0ï?°C to 70ï?°C. Application - 100Gigabit Ethernet - Infiniband EDR - Serial Data Transmission - Networking - Storage - Fiber Channel

GLsun QSFP-40G-SR4 Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for 40-gigabit ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. One version is each lane can operate at 10.5 Gbps up to 100m using OM3 or 300m using OM4 multimode fiber, another version is each lane can operate at 10.5Gbps up to 300m using OM3 or 400m using OM4 multimode fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service. Compatible Cisco Form Factor QSFP+ Max Data Rate 10.5Gbps Wavelength 850nm Max Cable Distance 150m on OM4 MMF Connector MTP/MPO Transmitter Type VCSEL 850nm Extinction Ratio 4dB Media MMF Power Consumption < 1.5W Power Supply Voltage 3.3V Operating Case Temperature 0C to +70C (Commercial)

40G QSFP+ SR4 100M MPO Optical Transceiver Product Model:EQ854X-3MCD01 Data Rate:40G Wavelength:850nm Distance:100m Connector:QSFP+ Fiber Type:MM DDM:Yes Place of origin: Made in China Shipping Port: ShenZhen Package type: 10PCS/Tray Features 1.High Channel Capacity: 40 Gbps per module 2.Up to 11.1Gbps Data rate per channel 3.Maximum link length of 100m links on OM3 multimode fiber Or 150m links on OM4 multimode fiber 4.High Reliability 850nm VCSEL technology 5.Electrically hot-pluggable 6.Digital diagnostic SFF-8436 compliant 7.Case operating temperature range:0 C to 70C 8.Power dissipation < 1.5 W Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems

Package type: Individual package or 10pcs/package Features 1.  Compliant to the 40GbE XLPPI  electrical specification per IEEE  802.3ba-2010; 2.Compliant to QSFP+ SFF-8436  Specification;Aggregate bandwidth of >40Gbps; 3.Operates at 10.3125 Gbps per  electrical channel with 64b/66b  encoded data; 4.QSFP MSA compliant;RoHS Compliant Part;Temperature range 0 °C to 70 °C; 5.Capable of over 100m transmission  on OM3 Multimode Fiber  (MMF)and 150m  on OM4 MMF; 6.Single +3.3V power supply  operating;Built-in digital diagnostic functions; 7.Utilizes a standard LC duplex fiber  cable allowing reuse of existing  cable infrastructure; Applications 1.Ethernet/Fiber Channel/Switch to Switch interface 2.Switched backplane applications/Router/Server interface 3.Other optical transmission systems

Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability. Features - compliant with ieee802.3z - gigabit ethernet standard - compliant with ieee802.3ae 10gbase - compliant with sonet oc-192 sr-1 sdh stm i64.1 - class 1 laser product complies with en 60825-1 - rohs compliant Applications - telecommunications - datacenter - network interface - test and measurement equipment

Definition of 400G QSFP-DD Transceivers QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Multi-mode Transceivers Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver. 400G QSFP-DD SR8 The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA. Single-mode Transceivers Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance. 400G QSFP-DD DR4 The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD DR4+ The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD LR4 The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD Loopback The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.

40G data rate with 4 CWDM lanes Mux/Demux design Up to 11.1Gbps Data rate per wavelength From 150m to 40km transmission on MMF/SMF Electrically hot-pluggable Digital Diagnostics Monitoring Interface Compliant with QSFP+ MSA with LC connector Case operating temperature range:0°C to 70°C Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH

GLsun QSFP-100G-SR4 Optical Transceiver is an integrated transceiver module containing a micro-optic component and semiconductor material, and can implement optical-electrical conversion and electrical-optical conversion. The module is designed as a four-channel, pluggable, parallel, QSFP28 transceiver for 100Gbps fiber-communication. Each channel can operate at 25Gbps up to 70m on OM3 fiber. And the operating wavelength is 850nm. The optical interface uses an 12 fiber MTP(MPO) connector, and the electrical interface uses a 38 contact edge type connector. This product is compliant to 100GBASE-SR4 of IEEE802.3bm standard and SFF-8436 specification, and provides reliable long life, high performance, and consistent service.

Up to 4X10Gbps Data rate.Max link up to 100M on OM3 cable, and 150m on OM4 cable.High reliability 850nm VCSEL technology.Electrically hot-pluggable.Low power consumption.Low EMI design.