400Gbps Qsfp-Dd Transceiver

Optechs 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Features * QSFP-DD MSA compliant * 8 parallel lanes on 850nm center wavelength * Compliant to IEEE 802.3bs Specification * Up to 100m transmission on multi-mode fiber (MMF) OM3 with FEC * Operating case temperature: 0 to 70�°C * 8x53.125Gb/s electrical interface (400GAUI-8) * Data Rate 53.125Gbps (PAM4) per channel. * Maximum power consumption 12W * MPO-16 connector * RoHS compliant Applications * Data Center Interconnect * 400G Ethernet * Infiniband interconnects * Enterprise networking

Features - 4 independent full-duplex channels - Up to 11.2Gb/s data rate per channel - MTP/MPO optical connector - QSFP+ MSA compliant - Digital diagnostic capabilities - Up to 100m transmission on OM3 multimode ribbon fiber - CML compatible electrical I/O - Single +3.3V power supply - Operating case temperature: 0 to 70oC - XLPPI electric interface - Maximum power consumption 1.5W - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 40G Ethernet

Product overview The 400G QSFP-DD module (400GBASE Quad Small Form-Factor Pluggable Double Density) is a new generation of 400G transceiver module based on the QSFP-DD form factor. It is a high-density, high-speed pluggable module with an additional row of contacts. It can provide eight channels of electrical interfaces, and the QSFP-DD module series provide the industry's highest bandwidth density. Features and benefits of 400G QSFP-DD Modules 1. Support hot swap Input/output devices plugged into 400G Ethernet Cisco QSFP ports 2. Interoperability Interoperable with other IEEE standard 400GBASE interfaces when applicable 3. Cisco platform certification Qualified and tested on QSFP-DD 400G port and obtained Cisco platform certification 4. Comply with IEEE 802.3bs It is compliant to IEEE 802.3bs protocol and 400GAUI-8/CEI-56G-VSR-PAM4 standard. 5. Comply with QSFP-DD MSA standard The collaboration of MSA will make the implementation and operation of the QSFP-DD pluggable interface in network equipment faster 6. Ultrahigh speed PAM4 modulation that supports speeds up to 400G runs at a speed of 50 Gbps. 7. Backward compatibility Backward compatible with low-speed QSFP (QSFP+ and QSFP28) pluggable modules and cables, designed for high-speed optical network applications. Application and market of 400G QSFP DD Guanglianâ??s 400G QSFP-DD product portfolio provides customers with a variety of ultra-high-density transceiver modules and the flexibility of 400 Gigabit Ethernet connection options. 400G is one of the highest data rates in the Ethernet world, providing critical aggregation and high bandwidth Interconnect applications provide improved functions. Therefore, 400G QSFP-DD is currently the most widely used fiber optic transceiversmodules in this series. The main applications are 400G Ethernet, ultra-large-scale data centers, high-performance computing networks, cloud networks, enterprise core and Distribution layer, Internet exchange, managed services, wireless infrastructure core, service provider and operator core network, and video distribution infrastructure. Technical advantages of 400G QSFP DD As a professional fiber optic transceivers manufacturer and supplier, Guanglian provides a comprehensive 400G QSFP-DD optical transceiver product portfolio. Our compatible QSFP-DD product portfolio includes transceivers that can operate on single-mode or multi-mode optical fibers. A connection distance of a few meters to 40 kilometers, and can support data rates up to 425 Gbps and 400G Ethernet applications.

40G data rate with 4 CWDM lanes Mux/Demux design Up to 11.1Gbps Data rate per wavelength From 150m to 40km transmission on MMF/SMF Electrically hot-pluggable Digital Diagnostics Monitoring Interface Compliant with QSFP+ MSA with LC connector Case operating temperature range:0°C to 70°C Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH

Up to 4X10Gbps Data rate.Max link up to 100M on OM3 cable, and 150m on OM4 cable.High reliability 850nm VCSEL technology.Electrically hot-pluggable.Low power consumption.Low EMI design.

GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. Compatible Cisco Form Factor QSFP+ Max Data Rate 44.6Gbps Wavelength 1310nm Max Cable Distance 40km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 5.5dB Media SMF Power Consumption

GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.2Gbps Wavelength 1310nm Max Cable Distance 10km at Single Mode Fiber Connector Single MPO Transmitter Type DFB Laser Array Extinction Ratio 3.5dB Media SMF Power Consumption

Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption

GLsun QSFP-40G-SR4 Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for 40-gigabit ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. One version is each lane can operate at 10.5 Gbps up to 100m using OM3 or 300m using OM4 multimode fiber, another version is each lane can operate at 10.5Gbps up to 300m using OM3 or 400m using OM4 multimode fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service. Compatible Cisco Form Factor QSFP+ Max Data Rate 10.5Gbps Wavelength 850nm Max Cable Distance 150m on OM4 MMF Connector MTP/MPO Transmitter Type VCSEL 850nm Extinction Ratio 4dB Media MMF Power Consumption < 1.5W Power Supply Voltage 3.3V Operating Case Temperature 0C to +70C (Commercial)