This QSFP+ module is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100 meters of OM3 multi-mode fiber. Features: 4 independent full-duplex channels Up to 11.2Gbps data rateper channel MTP MPO optical connector QSFP+ MSA compliant Digital diagnostic capabilities Capable of over 100m transmission on OM3multi-mode ribbon fiber CML compatible electrical I/O Single +3.3V power supply Operating case temperature: 0~70? XLPPI electric interface (with 1.5W Max power) RoHS-6 compliant Applications: Rack to rack Data Center Infiniband QDR, DDR and SDR 40G Ethernet OEM & Customs Partnering with a variety of world class OEM manufacturers over 8 years, Fiberstore is able to provide customized and cost-effective solutions of high quality for all needs and specifications, including Optical design, Mechanical design, Printed Circuit Board (PCB) layout and Electrical design, Software & Firmware design, Integrated assembly, Specific labels, etc.
Features - 4 independent full-duplex channels - Up to 11.2Gb/s data rate per channel - MTP/MPO optical connector - QSFP+ MSA compliant - Digital diagnostic capabilities - Up to 100m transmission on OM3 multimode ribbon fiber - CML compatible electrical I/O - Single +3.3V power supply - Operating case temperature: 0 to 70oC - XLPPI electric interface - Maximum power consumption 1.5W - RoHS-6 compliant Applications - Rack to Rack - Data Center - Infiniband QDR, DDR and SDR - 40G Ethernet
Definition of 400G QSFP-DD Transceivers QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density. Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot. Multi-mode Transceivers Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver. 400G QSFP-DD SR8 The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA. Single-mode Transceivers Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance. 400G QSFP-DD DR4 The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD DR4+ The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD LR4 The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA. 400G QSFP-DD Loopback The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
40G data rate with 4 CWDM lanes Mux/Demux design Up to 11.1Gbps Data rate per wavelength From 150m to 40km transmission on MMF/SMF Electrically hot-pluggable Digital Diagnostics Monitoring Interface Compliant with QSFP+ MSA with LC connector Case operating temperature range:0°C to 70°C Power dissipation < 3.5 W Compliant with CE,FCC,Rohs,REACH
GLSUN's QSFP-40G-ER4-T02 is a Optical Transceiver designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP+ Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. Compatible Cisco Form Factor QSFP+ Max Data Rate 44.6Gbps Wavelength 1310nm Max Cable Distance 40km Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 5.5dB Media SMF Power Consumption
GLsun 40Gb/s QSFP+ PSM 10km Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for InfiniBand QDR/DDR/SDR, 10G/8G/4G/2G fiber channel. and SAS Applications. The QSFP full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10.3Gbps operation for an aggregate data rate of 40Gbps 10km using single-mode fiber. These modules are designed to operate over single-mode fiber systems using 1310 nm DFB laser array. An optical fiber ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP+ PSM LR4 is one kind of parallel transceiver that provides increased port density and total system cost savings. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.2Gbps Wavelength 1310nm Max Cable Distance 10km at Single Mode Fiber Connector Single MPO Transmitter Type DFB Laser Array Extinction Ratio 3.5dB Media SMF Power Consumption
Cisco QSFP-40G-LR4 Optical Transceiver are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP+ MSA, and IEEE 802.3ba 40GBASE- LR4. Digital diagnostics functions are available via an I2C interface, as specified by the QSFP+ MSA. Compatible Cisco Form Factor QSFP+ Max Data Rate 11.3Gbps data rate per wavelength Wavelength 1310nm Max Cable Distance 10km link length Connector Duplex LC Transmitter Type DFB CWDM Extinction Ratio 3.5dB Media SMF Power Consumption
GLsun QSFP-40G-SR4 Optical Transceiver is a four-channel, pluggable, parallel, fiber-optic QSFP+ transceiver for 40-gigabit ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. One version is each lane can operate at 10.5 Gbps up to 100m using OM3 or 300m using OM4 multimode fiber, another version is each lane can operate at 10.5Gbps up to 300m using OM3 or 400m using OM4 multimode fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses a 12 fiber MTP (MPO) connector. This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service. Compatible Cisco Form Factor QSFP+ Max Data Rate 10.5Gbps Wavelength 850nm Max Cable Distance 150m on OM4 MMF Connector MTP/MPO Transmitter Type VCSEL 850nm Extinction Ratio 4dB Media MMF Power Consumption < 1.5W Power Supply Voltage 3.3V Operating Case Temperature 0C to +70C (Commercial)
40G QSFP+ SR LR ER Transceiver Module XYT-QSFP-40G-SR4 XYT-QSFP-40G-LR4 Cisco XYT-QSFP-40GE-LR4 Compatible 40GBASE-LR4 QSFP+ 1310nm 10km LC DOM OTN OTU3, 40G Ethernet, Infiniband, FiberChannel, SATA/SAS3, MSA Compliant Cisco QSFP-40GE-LR4 is supported on a wide range of Cisco equipment. FS S5850-32S2Q Switch Cisco Nexus 2000 N2K-C2248PQ Cisco Nexus 9000 N9K-X9432C-S Cisco Nexus 9000 N9K-C9372TX-E Cisco Nexus 9000 N9K-C9372PX-E Cisco Nexus 9000 N9K-M6PQ Cisco Nexus 9000 N9K-X9432PQ Cisco Nexus 9000 N9K-C92160YC-X Cisco Nexus 9000 N9K-M12PQ Cisco Nexus 9000 N9K-C9372PX-E Cisco Nexus 9000 N9K-C9372PX Cisco Nexus 9000 N9K-X9564TX (uplinks) Cisco Nexus 3000 N3K-C3016Q Cisco Nexus 9000 N9K-X9736PQ Cisco Nexus 9000 N9K-C9332PQ Cisco Nexus 9000 N9K-X9464PX Cisco Nexus 3000 N3K-C3064T FS S5850-48S6Q Switch Cisco Nexus 6000 N6K-C6004-M12Q Cisco Nexus 3000 N3K-3132Q Cisco Nexus 3000 N3K-3172PQ FS S5850-48S2Q4C Switch Cisco Nexus 9000 N9K-M12PQ Cisco Nexus 9000 N9K-X9636PQ Cisco Nexus 9000 N9K-C9372PX Cisco Nexus 6000 N6004-96Q Cisco Nexus 9000 N9K-C9336PQ Cisco Nexus 3000 N3K-C3064PQ-10GE Cisco Nexus 3000 N3K-C3164Q Cisco Nexus 3000 N3K-C3064-32T Cisco Nexus 9000 N9K-M6PQ-E Cisco Nexus 7000 N7K-F312FQ-25 Cisco A9K-MPA-2X40GE Cisco Nexus 9000 N9K-C93120TX Cisco Nexus 9000 N9K-M6PQ-E Cisco Nexus 5000 N5K-C56128P Cisco Nexus 3000 N3K-3172TQ Cisco Nexus 9000 N9K-C9372TX Cisco Nexus 5000 N55-M4Q Cisco Nexus 9000 N9K-M6PQ-E
100GBPS QSFP28 SR4 WITH DDM TRANSCEIVER ITEM NO.:EQSP10A-3MCD01 DATA RATE:100G WAVE LENGTH:850nm DISTANCE:100M CONNECTOR:MPO FIRST:MM DDM:YES PRODUCT ORIGIN:China SHIPPING PORT:Shenzhen Features � Up to 27.952 Gbps Data rate per channel � Maximum link length of 100m links on OM3 multimode fiber � High Reliability 850nm VCSEL technology � Electrically hot-pluggable � Digital diagnostic SFF-8436 compliant � Compliant with QSFP28 MSA  � Case operating temperature range:0°C to 70°C  � Power dissipation < 2.5 W Applications � Data center � Infiniband QDR � Fiber channel Standard � Compliant to IEEE 802.3 bm � Compliant to SFF-8436 � RoHS Compliant.
Features - QSFP28 End: Compliant with QSFP28 MSA specifications - SFP28 End: Compliant with SFP28 MSA specifications - 4 independent duplex channels operating at 25Gbps - AC coupled inputs and outputs - 100 Ohm differential impedance - All-metal housing for superior EMI performance - Single power supply 3.3V, low power consumption - RoHS Compliance - Operating temperature range: 0ï?°C to 70ï?°C. Application - 100Gigabit Ethernet - Infiniband EDR - Serial Data Transmission - Networking - Storage - Fiber Channel
25G SFP28 CWDM 10KM DDM optical transceiver Item NO.: ES2Cxx2X-3LCD10 Date rate: 25G Wavelength: 1270-1570nm Distance: 10KM Connector: LC DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.Hot-pluggable SFP28 form factor/Full-duplex transceiver modules 2.CWDM DML laser and PIN receiver 3.Compliant with SFP28 MSA, 25G Ethernet and CPRI/eCPRI specifications 4.Data rate up to 25.78Gbps/ Wavelength options: 1270nm-1370nm and 1470nm-1570nm (20nm spacing) 5.Reach up to 10km over SMF/ Power consumption < 2W/ Dual LC receptacles 6.Operating case temperature range from 0°C to 70°C (-40°C to +85°C optional) 7.3.3V power supply voltage/RoHS compliant (lead free) Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface 2.Switched backplane applications/Router/Server interface 3.Other optical transmission systems
16G SFP+ BIDI 1270/1330NM 10KM DDM optical transceiver Item NO.: ESBxxX6-3LCD10 Date rate: 16G Wavelength: 1270/1330nm Distance: 10KM Connector: LC DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.Supports up to 14.025Gbps bit rates/Hot-pluggable SFP+ footprint 2.Compliant with SFP+ MSA and SFF-8472 with single LC receptacle 3.Compatible with RoHS/ Single +3.3V power supply 4. Real Time Digital Diagnostic Monitoring 5.Operating case temperature:Standard: 0 to +70°C Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface 2.Switched backplane applications/Router/Server interface 3.Other optical transmission systems
16GBPS SFP+ MM 850NM 100M DDM optical transceiver Item NO.: ES85X6-3LCD01 Date rate: 16G Wavelength: 850nm Distance: 100M Connector: LC DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.Supports up to 14.025Gbps bit rate/ Hot-pluggable SFP+ footprint; 2.850nm VCSEL laser and PIN photodiode, Up to 100m for OM3-MMF transmission; 3.Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle; 4.Compatible with RoHS/ Single +3.3V power supply; 5.Real Time Digital Diagnostic Monitoring; 6.Operating case temperature: Standard: 0 to +70°C; Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface 2.Switched backplane applications/Router/Server interface 3.Other optical transmission systems
25G SFP28 850nm 300M SR with DDM Transceiver Item NO.:ESP852A-3LCD03 Date rate: 25G Wavelength:850nm Distance:300M Connector:LC First:MM DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features Supports 25Gbps data rate�70m on OM3 MMF and 100m on OM4 MMF� 850nm VCSEL laser and PIN photo-detector� Inter CDR on both Transmitter and Receiver channel� Duplex LC receptacle�Single 3.3V power supply�Power dissipation < 1W� DDM functions are available via the I2C interface�RoHS-6 compliant� Commercial case temperature range: 0°C to 70°C. Applications 1.Gigabit Ethernet 2.Fiber Channel 3.Switch to Switch interface 4.Switched backplane applications 5.Router/Server interface 6.Other optical transmission systems
100Gbps QSFP28 SR4 with DDM Transceiver Item NO.:EQSP10A-3MCD01 Date rate: 100G Wavelength:850nm Distance:100M Connector:MPO First:MM DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features Up to 27.952 Gbps Data rate per channel� Maximum link length of 100m links on OM3 multimode fiber� High Reliability 850nm VCSEL technology�Electrically hot-pluggable� Digital diagnostic SFF-8436 compliant�Compliant with QSFP28 MSA�  Case operating temperature range:0°C to 70°C�Power dissipation < 2.5 W� Applications 1.Gigabit Ethernet 2.Fiber Channel 3.Switch to Switch interface 4.Switched backplane applications 5.Router/Server interface 6.Other optical transmission systems
10G SFP+ Optical Transceiver 40KM Specification Data rate: 10G Wavelength: Tx1330/Rx1270nm Distance: 40KM Interface: LC Fiber: SM DDM: Yes Place of origin: Made in China Port:Shenzhen Working temperature: Commercial: 0C to +70C;Industrial:-40C to +85C Optical module used in Ethernet, SDH, Sonet,Can be compatible with CISCO 2900 Series,CISCO 4000 Series, CISCO 5000 Series,HUAWEI, the pole into, D-Link, ZTE, HP, juniper and other equipment. Our products require strict testing standards,standard packing form,to provide customers with quality service and timely delivery cycle. Scope of application: switch, Ethernet, data center, SDH, SONET, ATM Package type: Individual package or 10pc/package.
Up to 4X10Gbps Data rate.Max link up to 100M on OM3 cable, and 150m on OM4 cable.High reliability 850nm VCSEL technology.Electrically hot-pluggable.Low power consumption.Low EMI design.
40G QSFP+ SR4 100M MPO Optical Transceiver Product Model:EQ854X-3MCD01 Data Rate:40G Wavelength:850nm Distance:100m Connector:QSFP+ Fiber Type:MM DDM:Yes Place of origin: Made in China Shipping Port: ShenZhen Package type: 10PCS/Tray Features 1.High Channel Capacity: 40 Gbps per module 2.Up to 11.1Gbps Data rate per channel 3.Maximum link length of 100m links on OM3 multimode fiber Or 150m links on OM4 multimode fiber 4.High Reliability 850nm VCSEL technology 5.Electrically hot-pluggable 6.Digital diagnostic SFF-8436 compliant 7.Case operating temperature range:0 C to 70C 8.Power dissipation < 1.5 W Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems
40G QSFP+ ER4 40KM LC Optical Transceiver Product Model:EQxx4X-3LCD40 Data Rate:40G Wavelength:CWDM Distance:40km Connector:LC Fiber Type:SM DDM:YES Place of origin: Made in China Shipping Port: ShenZhen Package type: Individual package or 10pc/package Features 1.Transmission data rate up to 11.2Gbps per channel 2.QSFP+ MSA compliant 3.Compliant to IEEE 802.3ba specification for 40GBASE-ER4 links 4.4 CWDM un-cooled DFB lasers, using ITU G.694.2 wavelength grid at 1271, 1291, 1311 and 1331nm 5.High Sensitivity APD-TIA with optical DEMUX 6.Up to� 40km reach over standard single mode fiber 7.Hot pluggable electrical interface 8.Operating case temperature 0 C to +70 C 9.3.3V power supply 10.RoHS 6 compliant lead free 11.ROHS Compliance. Description This product is a transceiver module designed for 40km optical communication applications. The design is compliant to 40GBASE-ER4 of the IEEE P802.3ba standard. The module converts 4 inputs channels (4ch) of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 40Gb/s input into 4 CWDM channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331 nm as members of the CWDM wavelength grid defined in ITU-T G694.2. It contains a duplex LC connector for the optical interface and a 148-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. Applications 1.Gigabit Ethernet/Fiber Channel/Switch to Switch interface; 2.Switched backplane applications/Router/Server interface; 3.Other optical transmission systems
