Stillage 1.They are a type of popular industrial containers, they have the functions of pallet and cage. 2. They are widely used for bulk materials handling, transportation and storage, especially for automotive parts, accessories and spare parts, hardware,machinery, electronics etc. 3.Be made of dot welded line steel 6.0 with the bottom part of U shape steel weld support to reach the enforcement of the structure. 4.Stack up to three cages high easily. 5.Half drop front gate, allows easy access into cage even when stacked. 6.Standard size, or customized sizes available. 7.Galvanised for longlife. 8.each shelves holds up to 500-1000kg. Product Name Stillage Size L1200*W1000*H840mm(customized) Wire mesh 100*50;50*50mm Thickness 4.8-6.0mm Load Capacity 500/1000kg per level Stacker 3-4 layer Surface finish Power coated Packing Packed by plastic belt and plastic film
Filter Rating: 90% Length: 30m Width: 0.02-5m Features: Corrosion resistance. Anti-acid and alkali. Anti-high temperture. Good filter performance. Long using life
Material: H65 nickel copper alloy brass wire Common mesh: 60 80 mesh Length: copper wire mesh rolls regular length is 30 meters, other length can be customized Customized: Other sizes can be customized as per the requirement
Coated Stainless Steel Aramid Thread The outer layer can be KEVLAR Aramid fiber from DuPont, USA, and the inner layer is 316L stainless steel wire from Germany which has been treated and softened. 200D, 400D, 600D, 1000D, 1500D Aramid fiber can be selected for the outer layer, and the number of steel wires inside can be adjusted according to the softness. Generally, 4-10 steel wires are recommended; Our company adopts Taiwan imported wrapping machine, it is equipped with satisfying tightness and soft and smooth line. Features: 1. Good mechanical performance, excellent flame-retardant, heat-resistant performance, without flame it will not continue to burn, in 204 degrees under for continuous use. When the temperature is higher than 370 â??, it will be carbonized, 2. Stable chemical properties and excellent radiation resistance. 3. Cut-resistant, stab-resistant, wear-resistant, tear-resistant, fireproof, flame retardant as well as other excellent properties. Type: 200D, 400D, 600D, 1000D, 1500D Pictures: Application: Military use, Fire protection, Safety Protection; [engine, high-temperature furnace, high-temperature sheath] Heat Insulation; [wear-resistant, overweight, high-temperature resistant] Sewing Line; Various special-purpose sewing lines, which can compensate the shortcomings of other fire-resistant lines.
SPECIFICATIONS Product name: Rectangular Galvanized Wire Mesh Wire Steel Grade: Carbon Steel SAE 1006 to SAE 1010 Wire type: Galvanized Wire Diameter: mm 2.8 (+/- 0.08) Maximum Traction Strength: MPa 485 Minimum Zinc Coat: g/m�² 85 Supply Form: In Rolls Roll Length : 100m (+/- 1) Roll Height : 800 mm (+/- 16) Roll Weight : 42.5 Kg Rectangular Mesh Wide : 170 mm (+/- 5) Rectangular Mesh Height Variable, increasing from lower to upper end Price FOB per 20' container with 200 rolls
Material Red Copper Mesh 1 mesh-400 mesh Width 1 meter 1.2meter 1.6 meter 1.8 meter 2 meter or customized Length 30 meters 50 meters or customized
Materials 210 304 304l 316 316l 310s 904l 2205 410 430 2507 stainless steel wire. Mest count plain weave can be woven from 1- 400 mesh twill weave can be woven from 2- 635 mesh dutch wevae can be woven up to 500*3500 mesh Hole shape square Wire diameter 0.018-2.2mm Stock size 1*30m/roll 1.2*30m/roll 1.5*30m/roll or customized Customized Other sizes can be customized as per your requirements
Feature: Durable, anti-corrosion, long life service Usage: Liquid Filter mesh count: 10 15 20 35 40 mesh Sieve height:3.5cm,5cm, 6cm, 7.5cm, 8cm, 10cm etc.
Hard drawn mesh is specified in AS/NZS 4671: 2001. Heyou wire mesh offers a range of mesh sheet sizes and certres to meet the needs of typical New Zealand applications. Our scope covers standard sheet sizes of 4.65m x1.97m and larger economical sheets 6.15m x2.42m. The pitches are 150mm x150mm or 300mm x 300mm. AS/NZS 4671: 2001 specification for hard drawn mild steel wire for concrete reinforcement The mechnical property required by standard AS/NZS 4671: 2001 Nominal diameter(mm) Minimum 0.2% proof stress(Mpa) Tensile strength(Mpa) Minimum Maximum Up to and including 3.15 485 575 855 Over 3.15 485 575 775 The pitch (a) of longitudinal bars and transvers bars is not less than 50mm. The pitch is measured as below shown. The tolerance of the pitch is not more than 0.075 times the specified value. Specification of hard drawn mesh Model Pitch / certres Wire dia.(mm) Length (mm) Width (mm) Newt cover (sqm) Heyou reinforcing item Cross section sqmm / m Mass per sqm kg / sqm No. of Longitudinal wire No. of Cross Wire Overhangs of Longitudianal wire Overhangs of Cross wire Weight (kg) 668 150 4.0 4650 1970 7.525 668L 83.8 1.315 14 31 75/75 10/10 12.44 665 150 5.3 4650 1970 7.525 665L 147.1 2.309 14 31 75/75 10/10 21.85 663 150 6.3 4650 1970 7.525 663L 207.8 3.263 14 31 75/75 10/10 30.87 665 150 5.3 6150 2420 12.760 665E 147.1 2.309 17 41 75/75 10/10 35.29 663 150 6.3 6150 2420 12.760 663E 207.8 3.263 17 41 75/75 10/10 49.86 662 150 7.1 6150 2420 12.760 662E 263.9 4.144 17 41 75/75 10/10 63.33 661 150 7.5 6150 2420 12.76 661E 294.5 4.624 17 41 75/75 10/10 70.67 300 Centres of hard drawn mesh 668 300 5.6 4950 2220 10.08 84/10 82.1 1.289 4*5.6mm+4*4.0mm 19 25/25 10/10 15.85 665 300 7.5 4950 2220 10.08 147/10 147.3 2.312 6*7.5mm+4*5.3mm 19 25/25 10/10 28.36 665 200 6.1 5050 2020 8.312 SE62 RES 146.1 2.294 11 26 25/25 10/10 24.79 665 200 6.1 5850 2420 11.93 SE62 146.1 2.294 13 30 25/25 10/10 34.10 665 300 7.5 6050 2420 11.58 SE73 147.3 2.312 9 21 25/25 10/10 36.51 665 300 7.5 5000 2270 10.08 SE73DE 147.3 2.312 8*7.5mm+2*5.5mm 19 7.5mm:25/255.5mm:25/25 10/10 30.69 664 200 7.0 5650 2220 10.432 SE72 192.4 3.02 12 29 25/25 10/10 39.93 662 200 8.0 5650 2220 10.432 SE82 251.3 3.946 12 29 25/25 10/10 52.16 661 200 9.0 6100 2420 12.76 SE92 318.0 4.99 12 29 25/25 10/10 71.65 Equivalents are based on the nominal sectional area of steel per meter width. Additional meshes specification are available as a special order.Minimum order quantities will apply. Please mail to us Heyou wire mesh for further details. What does SE62 mean? In standard AS/NZS 4671: 2001, the designates letters to be used to identify reinforcing mesh products:
Reinforcement steel mesh was welded by automatic electrical resistance welding machines conformance to standard AS-NZS 4761-2001. The material of reinforcement steel mesh is 250N, 500N, 500L, 300E, 500E. Reinforcement steel mesh is very poupular in civil engineering and construction. It always used on road subgrade, building foundation, tunnel support and reinforced,mine and coal reinforced and support, bridge construction etc. During construction works, It is not only increase our working speed and time but also save 75% construction cost and enhance the crack resistance. The specification of rectangular reinforcement steel mesh as below: Rectangular Reinforcing Mesh 2.4m*6m=14.4sqm Code Cross wire Longwire mm Mass/sheetkg Quantityin pack Pitch@mm No. x dia., mm Pitch@mm No. x dia., mm RL718 7.60 @ 200 30 x7.6 6.75 @ 100 25 x 7.6 68 20 RL818 7.60 @ 200 30 x7.6 7.60 @ 100 25 x7.6 79 20 RL918 7.60 @ 200 30 x7.6 8.55 @ 100 25 x 8.55 93 20 RL1018 7.60 @ 200 30 x7.6 9.50 @ 100 25 x9.5 109 15 RL1118 7.60 @ 200 30 x7.6 10.65 @ 100 25 x10.65 131 15 RL1218 7.60 @ 200 30 x7.6 11.90 @ 100 25 x11.9 157 10 The panel size 2.4m*6m is very pouplar in Australian market,but considered the transportation in container by sea and saved cost, we advise the customers to change the panel size to be 2.2m x5.8m.
Heyou factory can produce concrete reinforcing mesh which is the specification of New Zealand standard AS-NZS 4761-2001. Details of concrete reinforcing mesh: Material: 250N, 500N, 500L, 300E, 500E Mesh Pitch: 200mm Wire: ribbed steel wire & plain steel wire Overhang length of two sides: 100mm Wire diameter:6mm, 7mm, 8mm, 9mm Size: 2.4m * 6m or 2.2m * 5.8m Packing: 1ton more or less per bundle HS code: 73142000 Production Standard: AS-NZS 4671-2001 The specification of concrete reinforcing mesh as below concrete reinforcing mesh specification Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width No. x dia., mm Pitch, @mm No. x dia., mm Pitch, @mm Unit area, kg/sqm Sheet, kg Long' l bars, sqmm/m Cross bars, sqmm/m Structural and skatch SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318 SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251 SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192 SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141 Non-structural SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147 SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84 Are you a Manufacturer? Heyou wire mesh factory as a professional factory for reinforcement mesh, which has 10 workshops, more than 200 workers, advanced production line,perfect production process, Strict production regulations. We own ourselves laboratory for inspected chemical composition and mechnical property of raw material, drawn wire diameter measuring,cutting wire length measurement, and full pieces of concrete reinforcing mesh which contained pitch of wire to wire, shearing resistance, tensile strength, yeild strength, elongation, bend test, weight tolerance, size tolerance, ribbed height, pitch of transverse wire ribbed, surface quality and etc. We're strictly to do everything in order to guarantee our concrete reinforcing mesh quality. Therefore, Heyou Wire Mesh has a high reputation in our field as real manufacturer.
Construction reinforcement mesh was made by plain steel wire. It main used on building construction complied with standard AS NZS 4671-2001. The material is 250N, 500N, 500L, 300E, 500E, the mesh size is 150x150mm, wire diameter is 5.3mm and 4.0mm and the overhang length is in both sides. These specificate is very pouplar in New Zealand civil engineering field. More features of construction reinforcement mesh and ours as below: 1. high quality raw material 2. electric resistance welding machine made it which has firmly solder join, size precision,and appearance good-looking 3. Professional management team 4. Complete QC rules and regulations 5. A full of laboratory testing instruments Advantage of construction reinforcement mesh by AS-NZS 4671-2001 standard: 1. Save 30% of steel bar dosages 2. Reduce 50%-70% work time, improve construction progress and shorten construction period. 3. Cut down 5%-10% construction cost 4. Used widely,it has a good market development prospects. The specification of construction reinforcement mesh by AS-NZS 4671-2001 standard as below: concrete reinforcing mesh specification Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width No. x dia., mm Pitch, @mm No. x dia., mm Pitch, @mm Unit area, kg/sqm Sheet, kg Long' l bars, sqmm/m Cross bars, sqmm/m structural SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318 SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251 SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192 SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141 Non-structural SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147 SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm. the steel bar after drawing shape as below figure: 1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45. The angle scope is greater than 45 and is less than 70, the rib height is from 0.025d to 0.10d. 2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost. Steel pallet for reinforcing mesh size 2.4m *6m Loading container for reinforcing mesh sheet: 2.4m *6m 3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars. 4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels. Notes: 1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679. 1, exceptthe tolerance of the diameter and roundness dosen't apply it. 2. For 500L steel bars, only requriement for wire diameter is less than 5.0mm is RekL 500 Material certificate of reinforcing mesh as below: Common size of Squre reinforcing mesh panel for Austialian Market Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6 x2.4 m sheets Cross-sectional area/m width No. x dia., mm Pitch@mm No. x dia., mm Pitch@mm Unit area kg/sqm Sheet, kg Long'l bars sqmm/m Cross bars sqmm/m Squre, with edge side-lapping bars SL102 10 x 9.5 + 4 x 6.75 200100 30 x 9.5 200 5.6 80 354 354 SL92 10 X 8.6 + 4 X 6.0 200100 30 x 8.6 200 4.6 66 290 290 SL82 10 x 7.6 + 4 x 6.0 200100 30 x 7.6 200 3.6 52 227 227 SL72 10 x 6.75 + 4 x 5.0 200100 30 x 6.75 200 2.8 41 179 179 SL62 10 x 6.0 + 4 x 5.0 200100 30 x 6.0 200 2.2 33 141 141 Squre, without edge side - lapping bars SL81 25 X 7.6 100 60 x 7.6 100 7.1 105 454 454 How can we conctrol our products quality for exporting Autralia? Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechanical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3. Secondly, the panel size tolerances measure way as: a. Panel Size dimensions 6m in length, there is 40mm tolerances. b. Panel size dimensions 6m in length, the tolerance is �±0.7% c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract. d. Weigh the each bundle weight to calculate each panel weight.
The slab mesh reinforcement is used on footing construction, beam and piers of waffle rafts. The slab mesh was made by Heyou wire mesh factory accordance with AS NZS 4671-2001. the popular specification is SL102, SL92, SL82, SL72, SL63, SL53, L8TM, L11TM, L12TM in the Australia and New Zealand civil engineeing. The slab mesh reinforcement includes reinforcement mesh and trench mesh. Aoriding to different construction site, they use the spcification of slab meshes are difference. Slab mesh reinforcement for footing slab, beam and piers The full of slab mesh reinforcement specification as below: REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8 L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2 L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6 L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9 L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9 L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72 L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13 L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7 L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3 L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8 L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34 L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1 L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3 L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8 L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3 L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8 L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1 Slab mesh reinforcement for footing slab, beam and piers RIBBED RECTANGULAR MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG RL718 6 x 2.4m Sheet 25 x 6.75 @ 100 30 x 7.60 @ 200 67 RL818 6 x 2.4m Sheet 25 x 7.60 @ 100 30 x 7.60 @ 200 79 RL918 6 x 2.4m Sheet 25 x 8.60 @ 100 30 x 7.60 @ 200 93 RL1018 6 x 2.4m Sheet 25 x 9.50 @ 100 30 x 7.60 @ 200 109 RL1118 6 x 2.4m Sheet 25 x 10.70 @ 100 30 x 7.60 @ 200 130 RL1218 6 x 2.4m Sheet 25 x 11.90 @ 100 30 x 7.60 @ 200 157 Slab mesh reinforcement for footing slab, beam and piers REINFORCING MESH TO AS/NZS4671:2001 / RIBBED SQUARE MESH 6.0 X 2.4 METRES Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG SL52 6 x 2.4m Sheet 10 x4.77 @ 200 + 4 x 4.00 @ 100 30 x 4.77 @ 200 21 SL62 6 x 2.4m Sheet 10 x 6.00 @ 200 + 4 x 4.24 @ 100 30 x 6.00 @ 200 33 SL72 6 x 2.4m Sheet 10 x 6.75 @ 200 + 4 x 4.77 @ 100 30 x 6.75 @ 200 41 SL82 6 x 2.4m Sheet 10 x 7.60 @ 200 + 4 x 5.37 @ 100 30 x 7.60 @ 200 52 SL92 6 x 2.4m Sheet 10 x 8.60 @ 200 + 4 x 6.00 @ 100 30 x 8.60 @ 200 66 SL102 6 x 2.4m Sheet 10 x 9.50 @ 200 + 4 x 6.75 @ 100 30 x 9.50 @ 200 80 SL81 6 x 2.4m Sheet 25 x 7.60 @ 100 60 x 7.60 @ 100 105 Slab mesh reinforcement for footing slab, beam and piers SQUARE MESH 300 X 300 SPACING TO AS/NZS4671: 2001 Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG SL53 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 14 SL63 6 x 2.4m Sheet 6 x 5.00 @ 300 20 x 5.00 @ 300 21
Trench mesh reinforcement is welded by galvanized low carbon steel wire or high quality low carbon steel wire It divided the shape: trapezoid, triangle, two bars and three bars welding. The trench mesh reinforcement is always used on foundation construction, residential slabs, footing construction and pier beam. Specification of trench mesh reinforcement Surface treatment:galvanized or drawn wire Material: R250N, D500N, D500L, D300E, D500E The Tensile strength is 300Mpa. The trench mesh was produced by standard AS NZS 4671-2001 Width: 0.2m - 2.3m Length: 6m REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8 L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2 L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6 L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9 L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9 L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72 L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13 L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7 L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3 L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8 L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34 L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1 L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3 L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8 L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3 L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8 L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1 Trench mesh reinforcement for footing slab construction and Waffle rafts beam and piers And Alls of using is accordance to AS NZS 2870-2011. 1. Footing slap The reinforced footing: the preportions for the tied edge beam apply only where there is a structural connection by concrete-to-concrete contact tied with fitments. The trench mesh is used on bottom reinforcement. The site and the type of construction difference cause we select the specification of the trence mesh reinforcement is different. 2. Waffle rafts beam and piers The waffle rafts for a one-storey building for clad frame or masonry veneer on moderately or highly reactive sites may be supported on piers as follows without structural design of the waffle raft: (a). pier to be located on the intersection of every third internal beam. (b). An additional N12 bar at the top to be provided in the internal beams intersecting the piers, but no shear fitments are required.
Metal Fittings for Harness and Fall Arrestors like Frame Buckle,Parachute Buckle,Carabiner Hook,Snap Hook,Scaffold Hook,Rebar Hooks,Rope Grab etc
Roll length 30m, can be customized Diameter 0.025-1.60mm Width 0.914m, 1.0m, 1.22m, 1.5m, 3.0m Business type Manufacturer and trading company Usage Filter Material SS202, 304, 304L, 316, 316L, 430, 904 and 904L and other special materials.
Product presentation (1)As a Faraday cage.We recommend the 200x /250x /300x. The wire mesh on the surface of a Faraday cage make a hollow conductor, in which the charge remains on the external surface of the cage. (2)For the RFI and EMI shielding, 100x /145x /200x is the nice choice. The RFI (radio frequency interference) shielding is a method of protecting electronic devices and technological systems from damaging electromagnetic interference (EMI). (3)Filter and sieve, you can choose our 50x /100x /150x wire mesh, also we provide customized any size and shape. (4)Decoration: most customers chose the 50x /80x/100x for the purpose. The red copper wire mesh decoration is beautiful and sturdy. Detailed description Product name Faraday cage RFI and EMI shielding red copper wire mesh Material 99.99% copper Size 40*12 inch(100*30cm) Weaving type PW/TW/DW The max mesh counts 400 Hot sales counts 80x/100x/150x/250x/300x Advantage Conductive, Electromagnetic shielding, Wear resistance, Sound insulation etc. Model K-2020-06-1 Shipping 1*red copper wire mesh Packing & Shipping (1)Paper tube + wrapped with water proof film + craft paper+ bubble pad + wooden box. (2)Special packing: According to customer needs. Company Introduction Our company was established in May 2019, and currently mainly deals in the wholesale and retail of metal products,stainless steel products, metal filters, mechanical products,metal materials, decorative materials, construction materials, hardware, electrical and electronic products. The company address is Jianhua E-commerce Industrial Park, Shangtang Street, Gongshu District, Hangzhou, ZheJiang, China. FAQ Q.Are you factory/manufacturer or trader? We are direct factory who owns production lines and workers. Every thing is flexible and there is no need to worry about extra charges by the middle man or trader. Q.Can I get free samples? If the sample is available, yes ,can be free. If unavailable,need to customize. Q.How long is your delivery time ? Usual it is 5-10 days if the goods are available in stock.or it is 15-20 days if customized Q.What is your minimum order quantity? Actually there is no MOQ for our products. But usually we recommend a quantity based on the price which is easy to accept.
"Ti-wire" high proformance titanium welding wire and filler metal are offered in sizes 0.8 - 4.0 mm (1/32"-5/32") with AWS A5.16/5.16M, AMS 4951, AMS 4954 for aerospace, medical, chemical & industrial etc. Type: GTAW/GMAW TIG/MIG AWS A5.16 classification: CP Titanium: ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-7 (Ti 0.2Pd), ERTi-12 (Ti 0.3Mo0.8Ni) Titanium Alloys: ERTi-5 (Ti 6Al4V), ERTi-23 (Ti 6Al4V ELI), ERTi-9 (Ti 3Al2.5V) Diameter: Dia. 0.8, 1.0, 1.2, 1.6, 2.0, 2.4, 3.0, 3.2, 4.0 mm Dia. 1/32", 1/16", 3/32", 1/8", 5/32" Shape: Straight Rod: 914 mm, 1000 mm, 5 kgs/box. Spool: D100: 0.7-1.2 kgs/spool, D300: 10 kgs/spool The feature of our titanium wire: - High surface quality - Stability of quality characteristics - Lower impurity content
Description Yitong Stainless Steel Filter Housings are industrial filter housings that accommodate different diameter filter cartridges and conform to Chinese national standard. These rugged housings offer all stainless steel construction and have great leakprofness. These Filter Housings are compatible with a wide range of fluids. Various cartridge types can be used including Wound, Melt Blown, Pleated, Carbon, Resin Bonded, Stainless Steel and others. The polishing tech is used on the inside and outside surface to avoid the rust problem. Features 1 It has various interface for filter cartridge, use the advanced numerical control machinery to process it 2 The surface finish outside is 0.4 micron, inside is 0.3 micron. 3 Comply with ISO2852 standard, the connector of the pressure gauge is adopted the â??Râ?? quick connector with Plane welding. 4 The height of the housing is adjustable. Application Prefiltration and clarification filtration of different industries, including pharmacy, chemical, beverage and liquor industries.It is also suited well in the production of sterilizing air in the fermentation system.
