Trench mesh reinforcement is welded by galvanized low carbon steel wire or high quality low carbon steel wire
It divided the shape: trapezoid, triangle, two bars and three bars welding. The trench mesh reinforcement is always used on foundation construction, residential slabs, footing construction and pier beam.
Specification of trench mesh reinforcement
Surface treatment:galvanized or drawn wire
Material: R250N, D500N, D500L, D300E, D500E
The Tensile strength is 300Mpa.
The trench mesh was produced by standard AS NZS 4671-2001
Width: 0.2m - 2.3m
Length: 6m
REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH
Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG
L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8
L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2
L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6
L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9
L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9
L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72
L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13
L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7
L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3
L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8
L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34
L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1
L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3
L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8
L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3
L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8
L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1
Trench mesh reinforcement for footing slab construction and Waffle rafts beam and piers
And Alls of using is accordance to AS NZS 2870-2011.
1. Footing slap
The reinforced footing: the preportions for the tied edge beam apply only where there is a structural connection by concrete-to-concrete contact tied with fitments.
The trench mesh is used on bottom reinforcement. The site and the type of construction difference cause we select the specification of the trence mesh reinforcement is different.
2. Waffle rafts beam and piers
The waffle rafts for a one-storey building for clad frame or masonry veneer on moderately or highly reactive sites may be supported on piers as follows without structural design of the waffle raft:
(a). pier to be located on the intersection of every third internal beam.
(b). An additional N12 bar at the top to be provided in the internal beams intersecting the piers, but no shear fitments are required.
Trench mesh reinforcement is welded by galvanized low carbon steel wire or high quality low carbon steel wire It divided the shape: trapezoid, triangle, two bars and three bars welding. The trench mesh reinforcement is always used on foundation construction, residential slabs, footing construction and pier beam. Specification of trench mesh reinforcement Surface treatment:galvanized or drawn wire Material: R250N, D500N, D500L, D300E, D500E The Tensile strength is 300Mpa. The trench mesh was produced by standard AS NZS 4671-2001 Width: 0.2m - 2.3m Length: 6m REINFORCING MESH TO AS/NZS4671: 2001 / TRENCH MESH Code STD UNIT LONGITUDINAL WIRES CROSS WIRES MASS / KG L8TM200 6 Metre 3 x 7.60 @ 100 4.00 @ 300 6.8 L8TM300 6 Metre 4 x 7.60 @ 100 4.00 @ 300 9.2 L8TM400 6 Metre 5 x 7.60 @ 100 4.00 @ 300 11.6 L8TM500 6 Metre 6 x 7.60 @ 100 4.00 @ 300 13.9 L8TM600 6 Metre 3 x 7.60 @ 100 4.00 @ 300 15.9 L8TM2400 6 Metre 25 x 7.60 @ 100 4.00 @ 300 72 L11TM200 6 Metre 3 x 10.70 @ 100 4.77 @ 300 13 L11TM300 6 Metre 4 x 10.70 @ 100 4.77 @ 300 17.7 L11TM400 6 Metre 5 x 10.70 @ 100 4.77 @ 300 22.3 L11TM500 6 Metre 6 x 10.70 @ 100 4.77 @ 300 26.8 L11TM600 6 Metre 7 x 10.70 @ 100 4.77 @ 300 34 L11TM2300 6 Metre 24 x 10.70 @ 100 4.77 @ 300 107.1 L12TM200 6 Metre 3 X 11.90 @ 100 4.77 @ 300 16.3 L12TM300 6 Metre 4 X 11.90 @ 100 4.77 @ 300 21.8 L12TM400 6 Metre 5 X 11.90 @ 100 4.77 @ 300 27.3 L12TM500 6 Metre 6 X 11.90 @ 100 4.77 @ 300 32.8 L12TM600 6 Metre 7 X 11.90 @ 100 4.77 @ 300 38.1 And Alls of using is accordance to AS NZS 2870-2011. 1. Footing slap The reinforced footing: the preportions for the tied edge beam apply only where there is a structural connection by concrete-to-concrete contact tied with fitments. The trench mesh is used on bottom reinforcement. The site and the type of construction difference cause we select the specification of the trence mesh reinforcement is different. 2. Waffle rafts beam and piers The waffle rafts for a one-storey building for clad frame or masonry veneer on moderately or highly reactive sites may be supported on piers as follows without structural design of the waffle raft: (a). pier to be located on the intersection of every third internal beam. (b). An additional N12 bar at the top to be provided in the internal beams intersecting the piers, but no shear fitments are required.
Trench Mesh products in 6.0m x (200mm, 300mm, 400mm, and 500mm) sheet sizes and are a general-purpose ribbed mesh sheet used to reinforce concrete slabs with a narrow profile. *SPECIFICATIONS* Material Carbon Steel Grade 500 Mpa Length 6000mm x (200mm, 300mm, 400mm, or 500mm); width is dependent on number of wires (3,4, 5, or 6) Main Wire: 7.60@100, 10.70@100, 11.90@100 mm Cross Wire: 4.00@300, 4.75@300 mm *STANDARDS* Manufactured in accordance with AS/NZS 4671:2019 ACRS Certified NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS) *PACKAGING* Unit of Measure Sheets Pack Type Bundles FCL Quantity 25MT
Reinforcing Trench Mesh made from CRB550(550MPa) ribbed wires. The reinforcing trench mesh products all come 6.0m longs, available in 3-Bar, 4-Bar, 5-Bar and 6-Bar, as well as 8, 11 and 12mm wires. Its long, narrow sheets of concrete reinforcing mesh, has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction. Used specifically for residential footing trenches, paths or other narrow spaces. Length m Width m Longitudinal Wires mm Cross Wires mm Mass Kg 6.0 0.2 7.6 @ 100 4.77 @ 300 7 6.0 0.3 7.6 @ 100 4.77 @ 300 9 6.0 0.4 7.6 @ 100 4.77 @ 300 12 6.0 0.5 7.6 @ 100 4.77 @ 300 14 6.0 0.2 10.7 @ 100 4.77 @ 300 13 6.0 0.3 10.7 @ 100 4.77 @ 300 18 6.0 0.4 10.7 @ 100 4.77 @ 300 22 6.0 0.5 10.7 @ 100 4.77 @ 300 27 6.0 0.2 11.9 @ 100 4.77 @ 300 16 6.0 0.3 11.9 @ 100 4.77 @ 300 22 6.0 0.4 11.9 @ 100 4.77 @ 300 27 6.0 0.5 11.9 @ 100 4.77 @ 300 33
Construction reinforcement mesh was made by plain steel wire. It main used on building construction complied with standard AS NZS 4671-2001. The material is 250N, 500N, 500L, 300E, 500E, the mesh size is 150x150mm, wire diameter is 5.3mm and 4.0mm and the overhang length is in both sides. These specificate is very pouplar in New Zealand civil engineering field. More features of construction reinforcement mesh and ours as below: 1. high quality raw material 2. electric resistance welding machine made it which has firmly solder join, size precision,and appearance good-looking 3. Professional management team 4. Complete QC rules and regulations 5. A full of laboratory testing instruments Advantage of construction reinforcement mesh by AS-NZS 4671-2001 standard: 1. Save 30% of steel bar dosages 2. Reduce 50%-70% work time, improve construction progress and shorten construction period. 3. Cut down 5%-10% construction cost 4. Used widely,it has a good market development prospects. The specification of construction reinforcement mesh by AS-NZS 4671-2001 standard as below: concrete reinforcing mesh specification Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width No. x dia., mm Pitch, @mm No. x dia., mm Pitch, @mm Unit area, kg/sqm Sheet, kg Long' l bars, sqmm/m Cross bars, sqmm/m structural SE92 13 X9.0 200 30 X9.0 200 5.0 75 318 318 SE82 13 X8.0 200 30 X8.0 200 3.9 59 251 251 SE72 13 X7.0 200 30 X7.0 200 3.0 45 192 192 SE62 13 X6.0 200 30 X6.0 200 2.2 33 141 141 Non-structural SL51.5 17 X5.3 150 40 X5.3 150 2.2 32 147 147 SL41.5 17 X4.0 150 40 X4.0 150 1.3 19 84 84
Our Quality IBC liner steel cage WIRE MESH FOR IBC TANK FRAME are great steel cage mesh for IBC Frame for use in Hotels, Garment Shops, Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Farms, Restaurant, Home Use, Retail, Food Shop, Printing Shops, Construction works , Energy & Mining, Food & Beverage Shops, Other, Advertising Company. The Core Components Includes PLC, Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear, Pump
1. Product Information: -Materials: Stainless Steel 304, SS316, SS316L Mesh, Carbon Steel Mesh -Mesh Options: 10x10, 11x11, 12x12, etc. -Wire Diameter: 0.80mm, 0.90mm, 1.0mm, etc. - Sizes: 750x1500/2000/2400mm, 900x1500/2000/2400mm, 1200x1500/2000/2400mm, etc. 2. Finish Options: - Black Powder Coated, Grey Powder Coated, etc. 3. Packaging: - Carton Box, Pallet, or Wooden Box with Plastic Film. Crafted with precision, our products ensure quality and versatility.
According to the wire diameter and opening, we can offer standard welded wire mesh or heavy type welded wire mesh. Differernt processing means we offer for your choice include: hot-dip galvanized welding wire mesh; hot-dip galvanized before welding wire mesh; electric-galvanised after welding wire mesh; electric-galvanised before welding wire mesh. In accordance with the customer's request.
Concrete reinforcing mesh 1.Wire diameter:3mm-14mm 2.Mesh:5*5cm, 10*10cm, 10*20cm, 20*20cm, 10*30cm, 30*30cm 3.Iso & sgs Packed with the iron or wooden pallet.
Square Mesh products in 6.0m x 2.4m sheet sizes are general-purpose ribbed mesh sheet used to reinforce concrete slabs. *SPECIFICATIONS* Material Carbon Steel Grade 500 Mpa Length 6000mm x 2400mm Main Wire (mm): 6.00@200, 6.75@200, 7.60@200, 8.60@200, 9.50@200, 7.60@100 mm *STANDARDS* Manufactured in accordance with AS/NZS 4671:2019 ACRS Certified NOTE - Can be manufactured in accordance with various international standards (EN, BS, ASTM and AS/NZS) *PACKAGING* Unit of Measure Sheets Pack Type Bundles FCL Quantity 25MT