Application:XLPE Cable is used indoor or outdoor, in tunnel, cable furrow or pipe, to be laid underground, be applicable to the well, water inside and fall in the bad soil. Standards:IEC60502-2, BS7870-4, BS7870-7, BS7870-8 Cores: 1 Core, 3 Core Conductor:Cu or Aluminum Insulation:XLPE (Cross-Linked Polyethylene) Armor:non-armor, steel tape armored, steel wire armored Sheath:PVC or PE Sheath Color:Black or Colors Product Description: - XLPE insulated PVC sheathed power cable (XLPE/PVC Cable) - XLPE insulated steel tape armored PVC sheathed power cable (XLPE/STA/PVC Cable) - XLPE insulated steel wire armored PVC sheathed power cable (XLPE/SWA/PVC Cable) - Flame retardant XLPE insulated PVC sheathed power cable (FR/XLPE/PVC Cable) - Flame retardant XLPE insulated steel tape armored PVC sheathed power cable (FR/XLPE/STA/PVC Cable) - Flame retardant XLPE insulated steel wire armored PVC sheathed power cable (FR/XLPE/SWA/PVC Cable) FR â?? Flame Retardant http://www.xlpecable.com
Application:XLPE Cable is used indoor or outdoor, in tunnel, cable furrow or pipe, to be laid underground, be applicable to the well, water inside and fall in the bad soil. Standards:IEC60502-2, BS7870-4, BS7870-7, BS7870-8 Cores: 1 Core, 3 Core Conductor:Cu or Aluminum Insulation:XLPE (Cross-Linked Polyethylene) Armor:non-armor, steel tape armored, steel wire armored Sheath:PVC or PE Sheath Color:Black or Colors Product Description: - XLPE insulated PVC sheathed power cable (XLPE/PVC Cable) - XLPE insulated steel tape armored PVC sheathed power cable (XLPE/STA/PVC Cable) - XLPE insulated steel wire armored PVC sheathed power cable (XLPE/SWA/PVC Cable) - Flame retardant XLPE insulated PVC sheathed power cable (FR/XLPE/PVC Cable) - Flame retardant XLPE insulated steel tape armored PVC sheathed power cable (FR/XLPE/STA/PVC Cable) - Flame retardant XLPE insulated steel wire armored PVC sheathed power cable (FR/XLPE/SWA/PVC Cable) FR â?? Flame Retardant
Application:XLPE Cable is used indoor or outdoor, in tunnel, cable furrow or pipe, to be laid underground, be applicable to the well, water inside and fall in the bad soil. Standards:IEC60502-2, BS7870-4, BS7870-7, BS7870-8 Cores: 1 Core, 3 Core Conductor:Cu or Aluminum Insulation:XLPE (Cross-Linked Polyethylene) Armor:non-armor, steel tape armored, steel wire armored Sheath:PVC or PE Sheath Color:Black or Colors Product Description: - XLPE insulated PVC sheathed power cable (XLPE/PVC Cable) - XLPE insulated steel tape armored PVC sheathed power cable (XLPE/STA/PVC Cable) - XLPE insulated steel wire armored PVC sheathed power cable (XLPE/SWA/PVC Cable) - Flame retardant XLPE insulated PVC sheathed power cable (FR/XLPE/PVC Cable) - Flame retardant XLPE insulated steel tape armored PVC sheathed power cable (FR/XLPE/STA/PVC Cable) - Flame retardant XLPE insulated steel wire armored PVC sheathed power cable (FR/XLPE/SWA/PVC Cable) FR â?? Flame Retardant
Conductor: Solid or Class B compressed concentric lay stranded 1350 aluminum meeting the requirements of ANSI/ICEA S-97-682. Conductor Shield: Extruded semi-conducting thermosetting polymeric stress control layer. Insulation: Extruded Ethylene Propylene Rubber (EPR) Class II and III as defined in ANSI/ICEA S-97-682. Insulation Shield: Extruded semi-conducting thermosetting layer, clean and free stripping from insulation. Copper Wire Shield: Helically applied annealed solid bare copper wires with a lapped non-metallic tape serving as a binder/separator. Jacket: Black, non-conducting, sunlight-resistant (PVC) or LLDPE.
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
1.Application The NFC33-209 Standard AAAC Conductor Aerial Cable is used for 600V or lower overhead service applications such as power transimission and distribution for street lighting,outdoor lighting,and temporary service for construction. The operating temperatures should not to exceed 75°C for polyethylene(PE) insulated conductors or 90°C for crosslinked polyethylene(XLPE)insulated conductors. 2.Standard : NFC33-209,BS7870,GB/T12527-2008 3.Rated voltage : 1kV,10kV or 11kV 4.Specification Concentric strand Aluminum/ AlloyAAAC wires insulated by PE or XLPE as phase conductor, bare or insulated AAC/AAAC/ACSR/AACSR messenger
Place of origin: henan, china (mainland) Brand name: zms Model number: 11kv cable Insulation material: xlpe Type: medium voltage Application: industrial, power plants, industrial, distribution lines, underground Conductor material: copper Jacket: pvc Rated voltage: 6.35/11kv, 10kv Dimensions: 70, 95, 120, 150, 185, 240, 300, 400 No. Of cores: 1c, 3c Conductor: stranded round compacted copper or aluminum conductor (cu / al ) Armoring type: swa, awa, sta, dsta, gswa Sheath: pvc (polyvinyl chloride), flame retardant pvc, pe, lsoh, hffr Color: black Operating temperature: 0â°c to 90â°c Standards: iec60502-2, bs6622
20kv power cable 800mm2, copper conductor xlpe insulated steel wire armored cable
Specific property for usage of 110kv~220kv xlpe high-voltage cable 1. Cable's conductor highest working temperature is allowed up to 90⺠c, and overload when meet an emergency is 130⺠c, when short circuit (in â?¤ 5 seconds) the highest temperature is 250⺠c 2. When installing or laying cable, the ambient temperature should be less than -20⺠c, and have to give a preheat to cable. 3. The minimum bending diameter(in follow the table): Note: in form, d0 is a real test value to cable's outer diameter. 4. Allowed biggest axial traction force to outer diameter when laying cable (not consider the radial lateral-pressure at bent set ion) t=kã? core no. Ã? section (kg), in formula, the coefficient k value should be: the copper core get 7, the aluminum core get 4. 5. Allowed biggest lateral-press p, when cable is being bent The single core cable is required pâ?¤ 500kg/m. P=t/r (t is indicated axial traction force; r is indicated radius of bent-wheel), knowing from above formula, as the traction force is made up by length and weight of cable. So it lets p to applying requirement as above. Then the diameter of bent-wheel should be widened. 6. Cable laying is not being restricted by drop.
Specific property for usage of 110kv~220kv xlpe high-voltage cable 1. Cable's conductor highest working temperature is allowed up to 90⺠c, and overload when meet an emergency is 130⺠c, when short circuit (in â?¤ 5 seconds) the highest temperature is 250⺠c 2. When installing or laying cable, the ambient temperature should be less than -20⺠c, and have to give a preheat to cable. 3. The minimum bending diameter(in follow the table): Note: in form, d0 is a real test value to cable's outer diameter. 4. Allowed biggest axial traction force to outer diameter when laying cable (not consider the radial lateral-pressure at bent set ion) t=kã? core no. Ã? section (kg), in formula, the coefficient k value should be: the copper core get 7, the aluminum core get 4. 5. Allowed biggest lateral-press p, when cable is being bent The single core cable is required pâ?¤ 500kg/m. P=t/r (t is indicated axial traction force; r is indicated radius of bent-wheel), knowing from above formula, as the traction force is made up by length and weight of cable. So it lets p to applying requirement as above. Then the diameter of bent-wheel should be widened. 6. Cable laying is not being restricted by drop.
Application:xlpe cable is used indoor or outdoor, in tunnel, cable furrow or pipe, to be laid underground, be applicable to the well, water inside and fall in the bad soil. Standards:iec60502-2, bs7870-4, bs7870-7, bs7870-8 Cores: 1 core, 3 core Conductor:cu or aluminum Insulation:xlpe (cross-linked polyethylene) Armor:non-armor, steel tape armored, steel wire armored Sheath:pvc or pe Sheath color:black or colors
Power cable high voltage steel tape/wire/al wire armoured underground power cable