1.Top-fast Manufacturer for Membrane Switch ( 48H) & Graphic Overlay (24h) 2.Waterproof rating up to IP66 3.Free Graphic Design 4.Free DHL shipping & Free Paypal Fee Get a quote online: https://www.jrpanel.com/R The first order is free, and only costs $30 for shipping!Samples only (within 5 pieces) For new customer, there is an $20 New Welcome Coupons, that it can be directly used for the order on JRPanel. Also, we are now Free DHL shipping & Free Paypal costs. which is a good activity for cutsomers.
If you have a material such as a FRP composite, you have an excellent cladding, roofing ... Glass fiber reinforced polymer coating materials are strong, durable and ... Waterproof roofs and moisture, corrosion, rust resistant walls can be easily ...
Environmental protection products, water-based tasteless, convenient construction, wide range of application, the construction of complex parts has obvious advantages. After curing the formation of non-joint, complete elastic waterproof layer, improve the waterproof and impermeability of construction engineering, is rolls material. Itâ??s impossible to reach the product. The film has high strength and elongation, and has strong adaptability to cracking or expansion of the base. The maintenance is convenient, only to the damaged part partial maintenance, still can achieve the original waterproof effect. This product has bright color, can play the role of decoration and beautification, the moisture content of the base is not strict, wet base surface can be constructed.
The product is employs asphalt or thermoplastic elastomer (styrene â?? butadiene block copolymer SBS), modified asphalt impregnated base. Both sides are coated with elastomer or plastic bitumen,upper surface is sprinkled with fine sand , mineral grains (membrane) or coverage polyethylene film,and underside with fine sand or coverage from polyethylene membrane. The product has good waterproof performance and anti-aging performance, and has the characteristics of not flowing at high temperature, not brittle crack at low temperature, simple construction, no pollution, long service life.It is mainly used in the industrial and civil building roofingã??bathroomã??basementã??pond , bridge, parking lot, swimming pool, tunnel, reservoir and other buildings waterproof, moisture-proof, waterproof steam.Impermeability and maintenance of asphalt roofing.sbs Modified asphalt waterproof rolling material is especially suitable for waterproofing of buildings in cold areas and areas with frequent structural deformation.
Company in Israel interested in selling pvc reinforced waterproofing membranes for roofing and swimming pools/uv resistant-in KG-several colors, widths, thickness and widths. Membranes have optical defects like spots, color. non standard lenghts Rolls are on pallets and selling is per KG
Winder frp membrane housing pressure vessels Side Entry Design Available in 1000 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Winder frp membrane housing pressure vessels for sea water desalination, high concentration waste water Side Entry Design Available in 1000 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF multiports (side ports, feed ports) available:2", 2.5", 3", please fill the attached ordering chart to clarify the ports position and size! 8 INCH frp filter housings Key Features: Operating Temp Range: -10�°C ---49�°C Internal permeate port not to exceed 125PSI (0.88 MPa) Operating pH Range: 3 â?? 11 Cleaning pH Range: 2 â?? 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request
Winder Side Entry Design Available in 450 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Winder frp membrane housing pressure vessels-450Psi 8040 frp membrane housings Side Entry Design Available in 450 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF industrial frp membrane housings Key Features: Operating Temp Range: -10C ---49C Internal permeate port not to exceed 125PSI(0.88MPa) Operating pH Range: 3 11 Cleaning pH Range: 2 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request Quality Assurance Hydro-static Leakage Test Pressure: Standard: 100% test, not sampling Ã?? 100,000 times cycle test Burst test with 6 times of its operating pressure 100% QA test with 1.5x design hydraulic pressure. ASME: 1.1x Design Pressure 100% QA inspection and cleaning before final packaging and delivery to customers. Submitted for NSF standard 61 Applications: Winder FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields. Notice: Please operate in accordance with User Guide! All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
Winder 2012 Design-Spring Locking Type Similar structure with Codeline, Wavecyber FRP pressure vessels Available in 600Psi,1000Psi,1200Psi operation pressure Ports: side port, end port Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Winder 8" 600-1200PSI FRP MEMBRANE HOUSINGS-2012DESIGN Similar structure with Codeline, Wavecyber FRP pressure vessels Side/End Entry Design Available in 600Psi,1000Psi,1200Psi operation pressure Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Key Features: Operating Temp Range: -10C ---49C Internal permeate port not to exceed 125PSI(0.88MPa) Operating pH Range: 3 11 Cleaning pH Range: 2 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request Quality Assurance Hydro-static Leakage Test Pressure: 8 INCH frp filter housings Standard: 100% test, not sampling 100,000 times cycle test Burst test with 6 times of its operating pressure 100% QA test with 1.5x design hydraulic pressure. ASME: 1.1x Design Pressure 100% QA inspection and cleaning before final packaging and delivery to customers. Submitted for NSF standard 61 Applications: Winder FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields. Notice: Please operate in accordance with User Guide! All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
W80S300/450 FRP MEMBRANE HOUSINGS Winder frp membrane housings-2019 design Hydrostatic Water Leakage Test-1.4 Times of Operation Pressure Low pressure frp membrane housing-Winder series with similar structure Available in 150,300.450 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Winder frp membrane housing pressure vessels Low pressure frp membrane housing-Winder series with similar structure Available in 150,300.450 psi pressure rating Hydrostatic Water Leakage Test-1.4times of operation pressure Model:W80S1000-5(3" side port�?4 ports) Side Entry Design Available in 300 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Key Features: Operating Temp Range: -10�°C ---49�°C Internal permeate port not to exceed 125PSI(0.88MPa) Operating pH Range: 3 â?? 11 Cleaning pH Range: 2 â?? 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request Differences of mebrane housings Winder 2012,2019, Rohone aluminium cap and ABS cap design: Quality Assurance Hydro-static Leakage Test Pressure: industrial frp membrane housings Standard: 100% test, not sampling �? 100,000 times cycle test �? Burst test with 6 times of its operating pressure �? 100% QA test with 1.5x design hydraulic pressure. ASME: 1.1x Design Pressure �? 100% QA inspection and cleaning before final packaging and delivery to customers. Submitted for NSF standard 61
Shieun Ta Industry Co., Ltd. established in 1981. We're professional in aerosol product design, OEM, and ODM, we also provide the professional suggestions for product accessories combined. 80 % of our products export to U.S., Middle East, Japan, Hong Kong, China etc. With commodious space, elevating capacity, human resource, facility upgrading; we provide integrity service and enormous capacity; persist product in best quality. Volume: 280ml/ other-can be customize Type: mist spray Scent: can be customize
DTRO DTNF membrane
Features 1) Good weather fastness and dimensional stability. 2) Excellent performance to high and low temperature (-40â?? ï½? +80â??), UV resistant and anti-corrosion. 3) Higher tensile strength and better extensibility under normal construction conditions. 4) Easy installation, solid joint, and no environmental pollution. 5) Good rooting penetration resistance. Application 1) Roofs, basement, toilet, bridge, underground, tunnel and dam. 2) Industrial and civil building waterproof. 3) Geo-synthetic liner for swimming pool, channels, irrigation system. 4) Especially for projects with high requirements in durability, anti-corrosion and deformation.
HDPE geomembrane Application 1.Landfill(primary &secondary containment) 2.Landfill caps/closures 3.Lagoon Liners 4.Mining Heap Leach Pads 5.Pond Liners 6.Canal Linings 7.Raw Water treatment reservoirs 8.Potable water reservoirs 9.Retention ponds Application: Environmental protection and environmental sanitation (for example, living landfill yard, sewage treatment plant, power plant adjusting tank, industrial and hospital solid waste, etc.) We have good quality ASTM standard HDPE geomembrane ,for more details
HDPE pre-applied waterproof membrane is made of three layers of materials which are HDPE sheet, hot-melt pressure sensitive adhesive, and isolating material respectively. And the isolating material can be special sand(type S) and isolation membrane(type M) Thickness 1.2mm 1.5mm or as required . Width : 2m or as required Length :20m or as required . Product Properties : 1.Pre-applied full-bonding installation: the HDPE pre-applied membrane sanding surface up temporary fixed on the bottom cushion. Direct binding reinforcement, and then poured concrete. The membrane coated sand layer will combine with it tightly ,no water moving between layers. 2.It has strong self-healing ability and can repair slight construction injury. 3.High strength of elongation, strong breaking tensile strength and good anti-perforation performance . 4..With strong chemical resistance to acid and alkali 5.Integration of self adhesion, waterproof and protection, so that can reduce construction links 6.Wet method construction, no need flat layer, low requirement for the base, not affected by weather and base moisture, it has obvious advantage of constructions in rainy season. 7.The floor board of the building should be constructed with a pre-applied anti-sticking method. This method no need protective layer. 8. one layer can reach level one waterproofing security requirements . Product Application Waterproof and anti-seepage , caverns , tunnels , subway , bridge , water conservancy , dam , basement , landfill , sewage treatment pool ,municipal construction we are qualified direct manufacture withs ISO certificates
Products Properties : 1. high tensile strength, large ductility, strong applicability for contraction or deformation of the substrate. 2.large width of material, high construction efficiency, small product consumption 3.Good diffusivity of water vapor, easy discharge of condensate, easy discharge of moisture left in the substrate 4.Root penetration resistance, chemical corrosion resistance and aging resistance 5. good flexibility at low temperature even at -30â?? and heat resistance 6.No liquid flow at high temperature 7. Cold construction and good safety performance. Size & Specification Size: 2m (width)*20m (length) Thickness: 1.2mm; 1.5mm; 2.0mm Type: Homogeneous, Reinforced, Fabric back,also we can make self adhesive style Exposed and Non-exposed Color: white, Grey or customized Certificate: ISO9001/14001, Root Resistance Certificate Product Application Widely used for waterproof and anti-seepage, caverns, tunnels, subway, bridge, water conservancy dam basement, landfills, sewage treatment pool, municipal construction
Products Properties : 1.With excellent ageing-resistant performance, it will not become brittle due to transfer of plasticizer 2.No plasticiser,do not release toxic gases during welding .Environmentally-sound, chloride-free and no pollution 3.High breaking strength and tear strength, anti-impact and perforation resistance 4.Good flexibility at low temperature, and no bending and crack at -40â?? 5. Good root resistance 6. FM certificate approved. 7. Good resistance to chemical attack; resistance to the corrosion of acid, alkali, salt, animal and vegetable oil , and resistance to alga, microbial growth. 8.white color, smooth surface, high reflectance, better energy saving effect. Specification &Classification Size: 2m (width)*20m (length) Thickness: 1.2mm; 1.5mm; 2.0mm Type: Homogeneous, Reinforced, fleece back,also we can make self adhesive style Color: white, Grey or customized Certificate: ISO9001/14001,FM Certificate , Root Resistance Certificate Product Application Convention centers , exhibition halls ,stadiums , library , airport terminals , industrial plants,warehouse , logistics and other buildingâ??s metal roofs , exposed concrete roofs and green roofs.
Winder® FRP tubular membrane housings(pressure vessels) End Entry Design Available in 150 psi pressure rating Suitable to hold 1pc 8" membrane housing(20"/40"/60" Length) Specification Winder® FRP tubular membrane housings(pressure vessels) End Entry Design Available in 150 psi pressure rating Suitable to hold 1pc 8" membrane housing(20"/40"/60" Length) Key Features Operating Temp Range: -10°C ---49°C Test pressure: 1.5x Design Pressure Operating pH Range: 3 11 Cleaning pH Range: 2 12 (less than 30 minutes) Please operate in accordance with User Guide of the FRP tubular membrane housings(pressure vessels) Frp Precision Filter Housing ADVANTAGES Winder® FRP tubular membrane housings(pressure vessels) has advantages as follows: â?¢Mirror finish of inner wall surface â?¢Anti-corrosion, anti-oxidation & aging â?¢Uneasy to damage the membrane column element â?¢High compressive strength â?¢Excellent anti-pollution performance â?¢Easy to assemble, long service life SPECIFICATION Material Fiberglass and epoxy. Process Fiberglass winding Pressure Rate (Bar) 150PSI Available height 20", 40" 60" Operating temperature -7 °C49 °C. Color white or customized Certificate ASME, ISO9001, ISO14001 FRP pressure vessel APPLICATION Winder® FRP tubular membrane housings(pressure vessels) are widely used in water treatment systems as follows: Pre-treatment treatment of: Garbage, Hospitals, family planning centers Health & epidemic prevention station Industrial zone, incineration plant landfill leachate treatment plants Living& food waste treatment plants Waste water treatment produced by: Coking, oil, gas, coal, chemical Purification, desalination, recycling separation of mobile water Industrial water & wastewater applications for reclamation and reuse. Recovery of Acid, alkali & precious metals
Rohone® frp membrane housing pressure vessels End Entry Design Available in 450psi, 600psipressure rating Accommodates standard make 8" Membrane Element Specification Rohone® frp membrane housing pressure vessels 8 Inch End Entry frp filter housings Design Available in 450psi, 600psipressure rating Accommodates standard make 8" Membrane Element industrial frp membrane housings Key Features Operating Temp Range: -10°C ---49°C Test pressure Standard: 1.3x Design Pressure ASME: 1.1x Design Pressure Internal permeate port not to exceed 125PSI(0.88 MPa) Operating pH Range: 3 - 11 Cleaning pH Range: 2 - 12 (less than 30 minutes) Mirror inner wall and brightly surface. White color is as standard. Customized colors are also available. ASME Code stamp available upon request Please operate in accordance with User Guide
Winder® frp membrane housing pressure vessels 4" End Entry Design Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating Accommodates standard make 4" Membrane Element Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Specification Winder® frp membrane housing pressure vessels 4" End Entry Design Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating Accommodates standard make 4" Membrane Element Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF 4 Inch End Entry frp pressure vessels Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88 MPa) Operating pH Range: 3 - 11 Cleaning pH Range: 2 - 12 (less than 30 minutes) Mirror inner wall and brightly surface. BSPP/NPT thread available White color is as standard. Customized colors are also available. ASME Code stamp available upon request
Polyaspartic Tiles Waterproofing Varnish DESCRIPTION PF600 is solvent free,two-component, hand applied, Polyaspartic clear coating. APPLICATION PF600 is used in kitchen, toilet and shower room waterproofing applications. FEATURES AND BENEFITS Fully bonded to the tile surface Low odor Excellent anti-slip property Cures fast,ready for use after 8-12 hours Convenient application Visible waterproofing
