Products Properties :
1. high tensile strength, large ductility, strong applicability for contraction or deformation of the substrate.
2.large width of material, high construction efficiency, small product consumption
3.Good diffusivity of water vapor, easy discharge of condensate, easy discharge of moisture left in the substrate
4.Root penetration resistance, chemical corrosion resistance and aging resistance
5. good flexibility at low temperature even at -30â?? and heat resistance
6.No liquid flow at high temperature
7. Cold construction and good safety performance.
Size & Specification
Size: 2m (width)*20m (length)
Thickness: 1.2mm; 1.5mm; 2.0mm
Type: Homogeneous, Reinforced, Fabric back,also we can make self adhesive style
Exposed and Non-exposed
Color: white, Grey or customized
Certificate: ISO9001/14001, Root Resistance Certificate
Product Application
Widely used for waterproof and anti-seepage, caverns, tunnels, subway, bridge, water conservancy dam basement, landfills, sewage treatment pool, municipal construction
It uses PVC resin as the main raw material with a variety of special additives and anti-aging agents. Advantage: 1. High compressive strength, high elongation and small size change in heat treatment. 2. Good low temperature flexibility. 3. The lap side can be welded with high strength. 4. Chemical resistance. 5. Good plasticity. Application: Waterproof and moisture proof works for roof and underground space of various buildings. Specification: 1. Thickness: 1.2/1.5/2.0mm 2. Width: 1000/2000mm 3. Length: 20m
PVC waterproofing membrane Production description: The pvc waterproofing(waterproofing membrane)rolls formulas are based upon polyvinyl chloride resin with other assistants added to provide flexibility and stability such as anti-oxidant, absorbent of ultraviolet light, plasticizer and plastic filling agent Features: 1. Exposed to sunshine: UV rays resistance, long service life and aging resistance 2. Easy installation and dimensional stability: can be wieldable under wide range of temperature and experience minus dimensional change in thermal treatment 3. High tensile strength and elongation thus can accommodate movements of substrates 4.Good flexibility under low temperature, good adaptability to ambient temperature difference 5, secure anti-puncture and good rooting resistance, no pollution caused to environment when being welded and good waterproofing choice for plant roofs 6. Good plasticity: convenient and fast treatment of detailed parts of corners and edges 7. 2 meters width reduce the joints and help saving materials or labor cost Type: 1. PVC membrane (h) 2.Pvc membrane with fiber composite backing sheet (l) 3. Reinforced pvc membrane within fabric (p) 4. Reinforced pvc membrane within glass fiber (g) 5. Reinforced pvc membrane within glass fiber and fiber composited backing sheet (gl) Application range : Pvc membranes form an effective barrier to liquid water or water vapor in the roof construction for industrial and civil engineering, underground engineering such as subway & tunnel, water conservancy such as water pools & ditch, shelter, grain depot, land filling, dyke, sewage treatment and basement. Thickness(mm); 1.2 1.5 2.0 Width(m); 2 Length(m); 20
Hpm-p polyvinyl chloride (PVC) series waterproof rolling materials, is a new type of polymer waterproof rolling materials processed with polyvinyl chloride resin as raw material, plasticizer, antioxidant, filler, ultraviolet absorbent and other auxiliary agents. Product Feature * superior aging resistance * resistant to root penetration, especially suitable for planting roofing * welding construction, weld solid and reliable and environmental protection and pollution free * high tensile strength, good elongation, good dimensional stability * has good plasticity * with self-extinguishing function * colorfast and pollution-free Product advantage * flexible material, suitable for various architectural shapes * quick construction and short time limit * less affected by weather conditions, flexible construction
Roof Basement Waterproof Material Pvc Membrane Description: PVC membrane roll is an excellent high-quality polymer waterproof sheet, made of PVC resin by adding plasticizer, anti-UV agent, anti aging agent, and stabilizer and other processing aids through extrusion and molding. As the highly-recommended product by the Ministry of Construction, it is featured by high tensile strength, great elongation, good stability, small shrinkage, low-temperature performances, good resistance to weathering and root penetration, and long service life. Specifications: Product name PVC roof sheet waterproof membrane with UV protection Brand MINGDING Thickness 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm Width 1.05m, 2.05m, 2.1m Length 20m or customized Type H type, L type, P type Property: Strong tensile strength, high elongation, good dimensional stability after heat treatment. 2)Excellent flexibility at low temperature, excellent resistance to the low and high temperature. 3)Excellent resistance to impact and perforation. 4)Excellent resistance to chemical etching. 5)Fireproof : the membrane extinguish immediately after away from the fire source. 6)Easy and fast construction without pollution. 7)Excellent resistance to the aging, long service life. Service life: more than 20 years as roof waterproof material, more than 50years if used in underground waterproof . 8)Repair project: Repair the damage place only and reduce the repair cost. 9)Various colors are available.
Company in Israel interested in selling pvc reinforced waterproofing membranes for roofing and swimming pools/uv resistant-in KG-several colors, widths, thickness and widths. Membranes have optical defects like spots, color. non standard lenghts Rolls are on pallets and selling is per KG
Supplier: Mining equipments, hdpe pipes and geomembranes, industrial constructions, special vehicles. spanish ceramic tiles, electric cables and hdpe conduits. hotel equipment, as per kitchens, restaurants, industrial laundry, chemical products, irrigation material
Buyer: Chemical products.
APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Supplier: Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,
