We offer continuous extrusion machines from 144 kg/hr output upto 2800kg/hr output. We also offer continuous extrusion line for aluminium wire 140-220kg/hr output with product cross section of 10-100sqmm.
We also additionally offer continuous extrusion machines machines aluminium tube ,wire, bus bar and also for copper alloy like CuAg,CuSn,CuMg.
We have been receiving good reputations from our domestic PE Pipe manufacturers who produce diverse kinds of PE Pipes.
We always try to keep in touch with our existing customers and potential customers to hace the opportunities to discuss what our unique products can do for you.
We always pay attention to the feedback from the customers. That is why Wonil is memorized as one of most reliable market leafers in oioe extrusion industries around the world as well as domestic markets.
We have been receiving good reputations from our domestic PE Pipe manufacturers who produce diverse kinds of PE Pipes.
We always try to keep in touch with our existing customers and potential customers to hace the opportunities to discuss what our unique products can do for you.
We always pay attention to the feedback from the customers. Taht is why Wonil is memorized as one of most reliable market leafers in oioe extrusion industries around the world as well as domestic markets.
289 Extrusion Machines Suppliers
Short on time? Let Extrusion Machines sellers contact you.
PE extrusion mould
1.Specification: 225mm-500mm
2. Material: 40Cr and tempered
3.Runner chrome treatment.
PE extrusion mould
•Diameter:
16-63mm
50-110mm
75-160mm
125-250mm
200-400mm
315-630mm
500-800mm
630-1000mm.
• Sizing sets: quality anti-wear copper, efficient cooling water ring
• A manual adjustment car included.
1).Widely used in the PVC/HDPE/PP-R/PS/ABS etc. pipes with tube diameters and wall thickness.
2).Manufacturing according to your requirements.
3).We guarentee you can produce high quality products.The mould is designed by a group of highly specialized designers.We send our engineers to your company to adjust moulds along with the testing exporters.
We supply Co-rotating parallel twin screws extruder for PE/PP filling with high percentage of up to 82% CaCO3/ 60%Talc/70%TiO2/45%Carbon powder/and 30% inorganic and organic pigments.
Salient Features of co-rotating twin screw extruder EC52:
1) Main motor 55kw, L/D=40
2) One venting port and one vacuum port
3) Screw rpm: 60-600rpm
4) The output capacity: 150~200kg/h
5) One mixer, one main feeder and one side feeder
6) One soft water cooling system, one vacuum system and one filter system
7) Strand cutting unit with water bath, air blower, pelletizier and classifier
8) One control panel.
Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply Co-rotating parallel twin screws extruder for PE/PVC /HFFR/ (peroxide and silane based) XLPE cable material compounding. All the raw material will be feed into twin screw extruder first for compounding. Then falls into single screw extruder for cooling down and extrusion.
Salient Features of two stage extruder EC65/TDD180 for PVC:
1) Main motor of twin screw extruder 90kw, L/D=40
2) One venting port and one vacuum port
3) Screw rpm: 60-600rpm
4) The output capacity: 400~600kg/h
5) One mixer, one loader and one feeder
6) One soft water cooling system, one vacuum system and one filter system
7) One single screw extruder with motor 55kw, L/D=9
8) Air cooling die face cutting system with cyclone and classifier
9) One control panel.
Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We have two type of Lab machine: Lab22 and Lab30 with three type cutting system: strand, water ring and air cooling die face cutting.
Salient Features of co-rotating twin screw extruder Lab22:
1) Main motor 4kw, L/D=42
2) One venting port and one vacuum port
3) Screw rpm: 60-600rpm
4) The output capacity: 5~15kg/h
5) One mixer, one main feeder and one side feeder
6) Strand cutting unit with water bath, air blower, pelletizier and classifier;
7) Control panel, soft water cooling system and vacuum system are inside the base of extruder.
Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply Co-rotating parallel twin screws extruder for PA/PBT/PC compounding with flame retardants and up to 30% chipped/long Glass Fiber, PC/ABS alloy, PP/PA alloy, PC/PB alloy, ABS color masterbatch.
Salient Features of co-rotating twin screw extruder SAT52:
1) Main motor 90kw, L/D=40
2) One venting port and one vacuum port
3) Screw rpm: 60-600rpm
4) The output capacity: 300~400kg/h
5) One mixer, one main feeder and one side feeder
6) One soft water cooling system and one vacuum system
7) Strand cutting unit with water bath, air blower, pelletizier and classifier
8) One control panel.
Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply twin screw extruder for PLA/PE filling with (cassava/corn/potato)starch, PBS degassing, PLA/PBS alloy and so on.
Salient Features of co-rotating twin screw extruder SAT65:
1) Main motor 90kw, L/D=40
2) One venting port and one vacuum port
3) Screw rpm: 60-400rpm
4) The output capacity: 150~250kg/h
5) One mixer, one loader and one feeder
6) One soft water cooling system, one vacuum system and one filter system
7) Air cooling die face cutting system with cyclone and classifier
8) One control panel.
Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
YDC Feed-through jacks are the new designed products in our company, are the upgrades of the primary jacks.
1.Using the new seals, to synchronous strengthen the seal-ability under great pressure.
2.Using special alloy steel with heat treatment process, reducing the cylinders expansion ratio in the tensioning process, so that the life of seals and sealing performance can be improved about 20%.
3.In the tensioning the operating process, jacks is easily damaged under overpressure because of the jack-based pullback cylinder, so we added the overpressure valve on the jacks to pressure production. Meanwhile we improved the original of commonly used structure by wire disc and flanged disc, to make the bearing capacity for oil pressure strengthen, so that enormously reduce the possibility of mechanical damage due to improper operation.
In a word, the YDC series feed-through jacks performance is improved, and widely used in pre-stressing and post-stressing construction.
Notice: according to users requirement, YDC through jack can be configured preventing turn device which can prevent jack from rotating in the process of stressing.
GYJ series extrusion machine is the special equipment of making the P fixed- end anchorage. It is light and simple operation etc, and can squeeze BFM 15P and BFM13P extruding set.
YH30 embossing machine is the special extruding equipment of making the fixed-end anchorage, mainly used for extruding the fixed-end of prestressed strands into pear-shaped scattering shape. After replaced the wedge, it can be used for the other specification of steel strands. YH30 type embossing machine is small in size, light, and easy to operate.
Model:YH30
Rated stressing pressure:30KN,
Oil pressure:43Mpa,
Stroke of extrusion:70mm
Mass:11kg.
Overall dimension:560x155x215.
289 Extrusion Machines Suppliers
Short on time? Let Extrusion Machines sellers contact you.
