Extruder Diam 55

Extruder omp 105 Diam 40 Vibro screen Cutting head tecnova Change filter Control panel Year of construction 2002.

Raw material+ carbon - mixing-- vacuum feeding -- material dryness -- single screw extruder -- steel wire unlocking -- extrusion mould-- spiral calibrator -- spray vacuum tank -- belt haul-off -- manual cut -- winder -- finished product inspecting & packing Model: lspe-75 lspe-90 Screw diameter: 75mm 90mm L/d: 30: 1 30: 1 Pipe range: 50-150 75-200 Capacity: 80-110 150-250 Main motor power: 55 90 Total power: 70 130 Line length: 15 18. Wooden cases or wood pallets

The coex bubble plant, represents the state-of-the art machine among the torninovaÆs production range . It has got all the most sophisticated technologies for air bubble film production, in order to ensure the easy production to the customer, thanks to the full automation of the co-extrusion process, to reach a film with air-barrier effect, that keeps the air inside the bubble for a longer time. The main advantages of such air bubble film are: Better cushioning protection compared with a thicker mono-extruded bubble film: the co-extruded bubble film offers higher air retention (thanks to the internal layer of PA6) and then ensures effective long-term cushioning performances from packing to final delivery. It means also extra strength of each bubble and then extra protection of the goods. Better protection with thinner plastic film: it means better performance with less raw material consumption. Reusable : his long lasting cushioning performances allows to use the same air bubble film for many times. Recyclable : the co-extruded bubble film could be recycled with other polyethylene material An air bubble film of 35 g/,2, produced by co-extrusion process, can be compared, in terms of resistance, with a mono-extrusion air bubble film of 55 g/m2. They have same resistance. Considering such relationship, it means that you save the 30% of the cost for raw materials, by using co-extrusion production process. Mainly, it is composed by three extruders: one for PE layer, one for the PA6 layer and the third one for the TIE layer between PE and PA6. These three extruders, through the last generation of feed-blocks with adjustable geometry allow the production of the special co-extruded air bubble films with ABCBA structure. You can easily understand the co-extrusion process through the following layout: The COEX BUBBLE plant has got the following features: Extruders with a.c. motors mounted in axis and with universal screws in wear-resistant steel, with modular profiles with barrier double thread, in different diameters according to the level of production requested. Every extruder is equipped with a filter and a gear pump with transmission by cardan joint and motor with inverter and feedback loop control. The gear pump, through PID control, adjust automatically the speed of the extruder according to the capacity requested by the production formula and to the desired extrusion pressure. Two separated flat dies for an excellent control and adjustments of the produced films, realized in steel with adjustable deliveries. The feed-block with adjustable geometry, allows the distribution uniformity of the internal layer of polyamide (PA6) on the whole width of the film, also with thickness less than 0.5 micron. Gravimetric blending and metering for the ingredients, for a more accurate and automated management of the granules to be extruded. Forming unit climbed on guide and rack arms that allow the automated movement from the stand-by position to the production position thought PLC. The forming cylinder is mounted on mobile structure (motorized and controlled by PLC) in both the directions for the regulation of the materials delivery from the flat dies and for its fast interchangeability. Main control panel managed by PLC, complete with supervision software managed through touch screen that allows the planning and the control of the whole plant . The production control occurs by formula that the operator can personalize according to the co-extrusion percentage he needs and to the speed of production. The forming cylinder is thermoregulated by a water thermoregulation unit in order to maintain more constant its temperature. Width of the produced film: from 1.000 mm up to 2.500 mm (or more on request) The plant can be equipped (also after installation, thanks to its modularity) with several accessories: Moulder cylinder with bubble in different diameters Perforation unit with brushless motor Cast cylinders thermoregulated by diathermic oil units for a better control of the produced films Third and fourth layer unit that allow the in-line lamination of one or two sides of air bubble film eliminating others processing Trimmed edge recovery systems that allow the in-line recycling of the trims with hopper feeding extruder Fast Loading system on the rewinder, that allows, in automatic way, to unload the produced roll with closing system by glue and the loading of the new carton core with application of ôhot-meltö glue. The machines are fully customizable. Contact us to project the most suitable plant for your production and market necessity.

Lab twin-screw extruder can value the processing materials by test the small amount, especially for hand sample evaluation for mass production, new formula research and development and pre-screening for pre-mixing materials. It can completely show the materials like color, surface, light, ingredient, properties and so on.Gongle small extruder can equip the PLC control and touch screen and completely record the data and its change. And it is the best choice for various institutes labs in universities and research institutes. Normal two size for lab twin screw extruder Type NoSeriesD(mm)L/DMax. R/MinPower (Kw)T(N/m)T/A³Capacity(kg/h) KC-20A2132-486004304.82-10   KC-30  A3032-485007.5854.810-30 B60011854.810-40 C500151106.215-55 D60018.5140830-75   Main features for laboratory extruder: 1. Very low energy-consumption  2. PLC touch screen operation and visualization 3, Record the data and visualization of data change 4. Can process standard-sized granules 5. Back pull screw with self-cleaning. Characteristic for Gongle Co-rotating Parallel Twin Screw Extruder: 1, Cordwood type screws 2, Sectional type barrels 3, Heating and cooling separately each section 4, Screen change with one-body casting 5, Base support is one plate bending without steel sheet sectional

China hot sale pvc twin screw extruder SHJ SERIES CO-ROTATING TWIN SCREW EXTRUDER TECHNICAL PARAMETER MODEL SHJ-20 SHJ-30 SHJ-36 SHJ-43 SHJ-50 SHJ-63S SHJ-72 SHJ-72M SHJ-92 SHJ-92M SHJ-133 SCREW DIAMETER 21.7 30.5 35.6 43 50.5 62.4 71.7 71.7 92.4 92.4 132.2 SCREW DEPTH 3.85 4.6 6 7.5 9 11 12.6 12.6 15.5 15.5 23.6 L/D 32~40 34~49 35~50 35~55 32~56 32~56 32~56 44~56 32~56 32~56 32~56 ROTATING SPEED 600 600 600 600 600 600 600 600 600 600 400 MOTOT POWER 3 (4) 11~18.5 15~30 15~30 45~90 45~90 110~250 160~250 250~540 315~540 600~800 CAPACITY 2~12 30~60 40~80 40~80 80~200 150~450 300~800 600~800 600~1500 800~1500 1500~2500 EQUIPMENT IS MAINLY COMPOSED: 1) double-screw extruder 2)double-plunger hydraulic network 3)hydraulic bypass valve 4)under water pelletizing system(underwater pelletizing machine, centrifugal machine, water pipe, electrical control system). The advantages of underwater pelletizing machine system: 1)Outstanding quality of particle 2)High efficiency 3)Strong reliability 4)Safe operation 5)The special formula plastic granulation 6)High output 7)Small noise Our services 1. Purchase Service LAIZHOU CHIYUAN has a special and efficient working team. If you are new in the printing and packing area, some samples of your products could be sent to us, and we can give you some professional suggestion. 2. Shipping Service LAIZHOU CHIYUAN has an independent department for shipping. Our Colleagues are familiar with T/T and L/C and all documents could be made efficiently and carefully. We can provide the economic shipping way for you. 3. Installation & Clients Training Services LAIZHOU CHIYUAN can appoint engineers to provide installation and technical support to your company. 4. After Sale Service LAIZHOU CHIYUAN machines have at least one year warranty, also we could provide some spare parts for free.

Main Characteristic 1. Hand hydraulic pressure barrel; Easy to change color and cleaning 2. Three zone PID temperature control accuracy ±1°C 3. Cooling water system inside the screw 4. Separately cooling water system in barrel No. 3 zone to avoid block water passage 5. Gear box equipped with lubricating system 6. Gear box equipped with water cooling system 7. Feeding area has permanent magnetic metal remover 8. Extruder noise lower than =80dB Main Technical Characteristic 1.The changing during moving gap is zero 2. High disperse efficiency 3. Self-cleaning system 4. Double temperature PID control, control accuracy ±2°C 5. Barrel equipped with soft water recycle automatic cooling system 6. Low noise and high secure gear box system 7. Equipped with permanent magnetic iron remover 8. Low material consumption, electricity and material rate kg/h.kw is higher Main Technical Parameter Model SFJ-46A or B SFJ-55A or G SFJ-64A or G SFJ-80G Screw diameter(mm) 46 55 64 80 Length-diameter(L/D) 14:1 16:1 15:1 15:1 Capacity(Kg/H) 100~180 or 100~280 300~400 400~500 600~800 Screw motor power(kw) 15, 6 or 22, 4 30 45 55 Feeding motor power(kw) 0.37 0.37 0.55 0.55 Heating power(kw) 0.75*4 0.75*6 1*5+0.75*1 2*5+1.5*1 Mixing motor power(kw) - 0.37 0.37 0.37 Screw speed(rpm) 0~500/0~800 0~500 0~500 0~500 Temperature control system ±2°C Double temperature PID auto-control. Accuracy ±2 Speed adjust system Adjustable speed by means of frequency inverter Feeding system Variable by means of frequency inverter Cooling system Water cooled Equipped with Screw feeding Permanent strong-magnetic device Overall dimension(mm) 2650*900*1900 2900*900*2000 3600*950*2260 -If you have any comments about our product ,please contact us and we are glad to help you. We sincerely welcome customers from all over the world come to visit and negotiate with us. Thank you so much!

Product Description Raw materail: PVC+Other chemical Product Introduction: The PVC door and window profile production line can choose different specifications of conical twin-screw extruders according to different profile sections and molds, and configure the corresponding vacuum calibration table, tractor, cutting machine, stacker and other auxiliary equipment. Technical Parameter: Model TPM-180 TPM-300 TPM-600 Width 180 300 600 Model SJSZ-51/105 SJSZ-65/132 SJSZ-80/156 Capacity(kg/h) 180 250 350 Motor power(kw) 22 37 55 Total length(m) 18 22 26 Machine List SJSZ Extruder Mould Vacuum calibration table Haul off Cutter Stacker