Broken (% max): 5% Average Moisture (% max): 14.5% Foreign matters (% max): 0.1% Damaged kernels (% max): 0.5% Yellow kernels (% max): 0.5% Chalky kernels (% max): 5% Red & red streaked kernel (% max): 0.5% Paddy (max/1 kg): 1 grains Glutinous kernel (% max): 0.2% Immature kernel (% max): 0.05% Average whole kernel length (min/mm): 6.2 - 6.7mm Crop year: Current Milling degree: Well milled & double polished, sorted
Broken (%Max) : 5% Average moisture (% Max) : 14.5% Foreign matters (%Max): 0.5% Damaged kernel (%Max): 0.5% Yellow kernel (%Max) : 0.5% Chalky kernels (% Max) : 8% Red and red streaked kernel (%Max): 1% Glutinous kernel (%Max): 1% Immature kernel (%Max): 0.5% Average whole kernel length (min): 4.8 - 5.8mm Paddy (max/ 1 kg): 1 grains Crop Year: Current Crop Mill Degree: Well milled & double polished
Broken (%Max) : 5% Average moisture (% Max) : 14.5% Foreign matters (%Max): 0.1% Damaged kernel (%Max): 0.5% Yellow kernel (%Max) : 0.5% Chalky kernels (% Max) : 2% Red and red streaked kernel (%Max): 0.3% Glutinous kernel (%Max): 0.2% Immature kernel (%Max): 0.2% Average whole kernel length (min): 4.0 - 5.2mm Paddy (max/ 1 kg): 0 grains Crop Year: Current Crop Mill Degree: Sortex, Well milled & oil polished
Broken (% max): 5% Average Moisture (% max): 14.5% Foreign matters (% max): 0.1% Damaged kernels (% max): 0.5% Yellow kernels (% max): 0.5% Chalky kernels (% max): 3% Red & red streaked kernel (% max): 0.5% Paddy (max/1 kg): 1 grains Glutinous kernel (% max): 0.2% Immature kernel (% max): 0.05% Average whole kernel length (min/mm): 6.2 - 6.7mm Crop year: Current Milling degree: Well milled & double polished, sorted
Broken (% max): 5% Average Moisture (% max): 14.5% Foreign matters (% max): 0.1% Damaged kernels (% max): 0.2% Yellow kernels (% max): 0.3% Chalky kernels (% max): 2% Red & red streaked kernel (% max): 0.2% Paddy (max/1 kg): 1 grains Glutinous kernel (% max): 0.2% Immature kernel (% max): 0.05% Average whole kernel length (min/mm): 6.8 - 7.5mm Crop year: Current Milling degree: Well milled & double polished, sorted
Broken (%Max) : 5% Average moisture (% Max) : 14.5% Foreign matters (%Max): 0.5% Damaged kernel (%Max): 1% Yellow kernel (%Max) : 0.5% Chalky kernels (% Max) : 8% Red and red streaked kernel (%Max): 1% Glutinous kernel (%Max): 1% Immature kernel (%Max): 0.5% Average whole kernel length (min): 5.8 - 6.5mm Paddy (max/ 1 kg): 1 grains Crop Year: Current Crop Mill Degree: Sortex, Well milled & Double polished
310S Stainless steel round bar is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310S Stainless steel round bar has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 â??, and it can work continuously at 1100 â??. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts. Standard JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material 310S Specifications Round bar Diameter:0.1~500mm Hexagonal bar Size: 2mm~100mm Flat bar Thickness 0.3~200mm Width 1~2500mm Square bar Size: 1mm*1mm~800mm*800mm Length 2m, 5.8m, 6m, or as required. Surface Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term Ex-work, FOB, CFR, CIF, etc. Export to Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time Standard size is in stock,prompt delivery or as order's quantity. Package Export standard package, bundled or be required. The inner size of container is below: 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry
* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. * Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A53 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
* A214 is a steel grade produced according to American ASTM standards, which belongs to American standard. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A214 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
Material * ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022) * DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4) * BS(040A04,095M15,045M10,080A40,045M10,080M50) * Thickness : 0.1mm-300mm or as required * Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. * Technique : Hot rolled,cold rolled Surface Treatment * Clean, blasting and painting according to customer requirement Thickness tolerance + 0.1mm * Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. * Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Product name : Galvanized Steel Round Bar Diameter : 16-250mm or Customized Length : Customized Advantages : Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9 Tighter tolerances on request Out of roundness standard: half of diameter tolerance Finish Line Straightening machines Milling and chamfering devices Surface control (Circograph, Circoflux) Ultrasonic control device Antimixing control - spectrotest devices Packaging, marking Standard : AiSi, ASTM, BS, GB, JIS, EN,AS ETC. Surface Treatment : Galvanized Mechanical Property : Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending Bar Processing : Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling Application * Automatic lathe processing, metal stamping parts processing; * Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment; * Household appliances, instrumentation industry; * Office equipment (computers, photocopiers, cameras, fax machines, etc.); * Watch components, glasses; * Electronic terminal pin, timer, carburetor; * Decorations, light ornaments, cars, motorcycles, chains; * Clean car sweepers and toys; * Pens, handbag accessories, belt buckles, fishing gear, etc .; * Studs, screws, nuts, pipe joints, spring seats, etc.
* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties. * Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel. Material : API5L Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : �±0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A106Gr. B Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment * Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : * It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing * Waterproof paper, and steel strip packed. * Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts
* A179 is a steel grade produced according to American ASTM standards, which belongs to American standard. A179 Carbon steel round bar is applicable to cold drawn high-quality low-carbon seamless steel pipe for heat exchanger and condenser. * Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. * Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material : A179 Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : + 0.1mm Application : * It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material A192 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point. Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs. Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction. Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed. Material ST37 Thickness 0.1mm-300mm or as required Standard AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique Hot rolled,cold rolled Surface Treatment Clean, blasting and painting according to customer requirement Thickness tolerance �±0.1mm Application It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time Within 7-15 workdays after receiving deposit or L/C Export packing Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity 250,000 tons/year Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.
Q195 Galvanized Round Steel is a surface galvanized sheet with yield strength of 195MPa. Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Product name Q195 Galvanized Round Steel Diameter 16-250mm or Customized Length Customized Advantages Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9 Tighter tolerances on request Out of roundness standard: �½ of diameter tolerance Finish Line Straightening machines Milling and chamfering devices Surface control (Circograph, Circoflux) Ultrasonic control device Antimixing control - spectrotest devices Packaging, marking Standard AiSi, ASTM, BS, GB, JIS, EN,AS ETC. Surface Treatment Galvanized Mechanical Property Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending Bar Processing Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling Application * Automatic lathe processing, metal stamping parts processing; * Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment; * Household appliances, instrumentation industry; * Office equipment (computers, photocopiers, cameras, fax machines, etc.); * Watch components, glasses; * Electronic terminal pin, timer, carburetor; * Decorations, light ornaments, cars, motorcycles, chains; * Clean car sweepers and toys; * Pens, handbag accessories, belt buckles, fishing gear, etc .; * Studs, screws, nuts, pipe joints, spring seats, etc.
Q235 Galvanized Round Steel is a surface galvanized sheet with yield strength of 235MPa. Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Product name Q235 Galvanized Round Steel Diameter 16-250mm or Customized Length Customized Advantages Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9 Tighter tolerances on request Out of roundness standard: �½ of diameter tolerance Finish Line Straightening machines Milling and chamfering devices Surface control (Circograph, Circoflux) Ultrasonic control device Antimixing control - spectrotest devices Packaging, marking Standard AiSi, ASTM, BS, GB, JIS, EN,AS ETC. Surface Treatment Galvanized Mechanical Property Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending Bar Processing Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling Application * Automatic lathe processing, metal stamping parts processing; * Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment; * Household appliances, instrumentation industry; * Office equipment (computers, photocopiers, cameras, fax machines, etc.); * Watch components, glasses; * Electronic terminal pin, timer, carburetor; * Decorations, light ornaments, cars, motorcycles, chains; * Clean car sweepers and toys; * Pens, handbag accessories, belt buckles, fishing gear, etc .; * Studs, screws, nuts, pipe joints, spring seats, etc
Stainless steel strip is an extension of ultra-thin stainless steel plate, and is also a kind of steel plate used in industry. However, unlike ordinary steel plates, stainless steel strip has a longer shape, and its scope of use is also different from ordinary steel plates. At present, there are many varieties of stainless steel strips, and there are also many different production specifications. Different stainless steel strips use different categories. Cold rolled strip is a specially treated stainless steel strip product. It is another industrial steel strip product, which is made of stainless steel strip as the basic material and is processed by cold rolling mill at room temperature. The rolled strip has excellent characteristics such as smooth surface, flatness, high dimensional accuracy and good mechanical functions, and is often processed into rolls and coated steel plates. Cold rolled strip is widely used in tractor, car and other industrial manufacturing. Hot rolled strip is another kind of stainless steel strip, which has low hardness, easy processing, good ductility and other excellent characteristics, so it is often used as a thin plate. Product Name Stainless Steel Strip Material DIN 1.4301/1.4306/1.4541/1.4401/1.4404/1.4571/1.4539/1.4410/1.4833/1.4845 Surface BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Edge Plain Mill Standard ASTM DIN GB JIS EN AISI Grade 201/304/304L/321/316/316L/310S/904L/309S/316Ti/317L/2205/2507, etc Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period.
Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. The following are some specifications that we often export, for reference only, if you have special requirements, we can customize, we will have professional designers to provide you with the most satisfactory style. The construction industry is mainly used to manufacture anti-corrosion roof panels and roof gratings for industrial and civil buildings; In light industry, it is used to manufacture household appliance shells, civil chimneys, kitchen appliances, etc. In automobile industry, it is mainly used to manufacture corrosion resistant parts of cars, etc; Agriculture, animal husbandry and fishery are mainly used as food storage and transportation, frozen processing tools for meat and aquatic products, etc; It is mainly used for the storage and transportation of materials and packaging tools. Product name DX52D Galvanized steel sheet Standard ASTM,DIN,JIS,BS,GB/T,GB,EN Material DX52D Application Villas ,townhouse, apartments ,tourist destination building ,and roof conversion project Thick 0.12-4.0 mm / BWG / AWG or as your request Width 20-1500 mm or as your request, Normal width is 914/1000/1219/1250/1500 mm Zinc Coating 30~600 G/M2 Surface Structure Regular spangle,Minimum spangle, Zero spangle, Big spangle Surface Treatment Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass Package Waterproof paper & plastic film & iron packing & bunding, or as customer's requirement Products Display Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
