1. PRODUCT OVERVIEW VHR joints made by VinhHung Investment and Production Co., Ltd (Vinh Hung IP) is the steel strip-seal joint comprising of two steel rails with anchor bars connected to embedded bars in the pier cap of the headwall of the abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrinkage mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joints identified by the cross-section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2.PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movement if appear. Simple in design and installation, high load bearing and durability. The joints are designed suitably for curb and median structures. Totally water-tight. To ensure the long-lasting durability, VHF-steel strip expansion joints are protected from corrosion with methods like: coat with 2-component epoxy painting, PU-based paint (Polyurethane).., zinc-coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8-hour cycles) according to ASTM B117 standards
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
Noise barriers products supplied to projects by Vinh Hung IP meet all the current standards, enable to minimize the noise volume affecting the surrounding area (residential areas, hospitals, schools, industrial parks and so on) and offer the beautifulness. The noise barrier walls are windproof, increases the concentration for drivers, which increases the safety for people and vehicles on roads Absorptive noise barrier wall: Using materials capable of absorbing the sound, punching plates and so on, which prevents the sound reflection. Sound absorption Standards: Noise Reduction Coefficient â?? NRC indicates the amount of noise power absorbed by the noise absorbing barrier wall. For the absorptive noise barrier wall, the NRC will be within 0.6 to 0.9 range (FHWA highway noise barrier design handbook). Reflective noise barrier wall: Using the good noise insulation materials like Polycarbonate panels (PC), Polymethyl methacrylate panels (PMMA), Glass laminate. Sound reflective Standards: Transmission loss coefficient â?? TL will measure the sound power hit on or transmitted through the walls. For the reflective noise barrier wall, the TL coefficient is >25 dB at 500HZ and >30 dB at 1000HZ (refer to KS F4770 standards). ALLATION METHODS Preparation: Gather materials, accessories and installation Check the surface of the basement system: Check the distance among the anchor Check the dimensions of post flanges, positions of bolt holes and anchor
1. PRODUCT OVERVIEW VHR joints made by VinhHung Investment and Production Co., Ltd (Vinh Hung IP) is the steel strip-seal joint comprising of two steel rails with anchor bars connected to embedded bars in the pier cap of the headwall of the abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrinkage mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joints identified by the cross-section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2.PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movement if appear. Simple in design and installation, high load bearing and durability. The joints are designed suitably for curb and median structures. Totally water-tight.� To ensure the long-lasting durability, VHF-steel strip expansion joints are protected from corrosion with methods like: coat with 2-component epoxy painting, PU-based paint (Polyurethane).., zinc-coating according to ASTM A123â?¦, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8-hour cycles) according to ASTM B117 standards
Vinh Hung specializes in manufacturing safety parapet for transport, civil and industrial works. Parapet products are manufactured according to the typical design of the company or according to customer drawings. Our Parapet products conform to the standards: BS EN 1317, TCVN 11823-13: 2017. All parts of the parapet are processed on modern machinery lines, high precision, in order to facilitate the installation and durability of the product. Parapets are the outermost of the bridge deck. Handrails are used to protect vehicles and people when a collision occurring and direct the vehicles on bridges. Parapets are mainly used steel, aluminum alloy, wood, reinforced concrete. Installed on the bridge concrete barrier, parapets donot only ensure traffic safety but also increase the aesthetics of the whole bridge. Parapets consist of column system, handrails and the middle bar which are hot-dip galvanized or electrostatic painting with multiple types, sizes and designs. Parapets aesthetics are required very high when designing, especially the bridges in the city area or in the important roads. All details of the parapet are processed on modern machinery lines with high precision and skilled workers to improve job efficiency as well as durable installation of products. Vinh Hung parapets are hot-dip galvanized according to AASHTO M111 (ASTM A123) which would bring the maximum life for products. The high quality of Vinh Hung parapets is affirmed when reaching out to the region with export orders to projects in Brunei.
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
1. Product Overview VHM expansion  joint made by VinhHung Investment and Production Co., Ltd (VinhHung IP) are composed of multiple steel rails in combination with support beam and special structures. VHM - modular expansion joints accommodate to longitudinal movement from160mm upwards. The expansion joints are connected to the bridge deck through the anchoring reinforced system. Rubber seal serve as the drainage trough and prevent the system from dust and debris. 2.PRODUCT CHARACTERISTICS Design and manufacture according to AASHTO LRFD, TCVN 11823 2017 standards. Allow the longitudinal displacement of up to 720mm, the vertical and horizontal displacement satisfy AASHTO standards. Be able to withstand with high loads with stable and durable structure. Provide the smooth-riding surface while absorbing the impact of heavy traffic. Each center beam is fixed with an independent supporting bar, which satisfies the requirement of the fatigue threshold C (AASHTO 2007). Be protected with high anti-corrosive coating layer and treated with anti-skid coating technology. Be totally watertight.
Hello, we specialize in manufacturing all kinds of finger joint board sizes of acacia, pine ... and follow requests.
M6 M8 M10 . Wood-implanted iron oysters Product code: sp3 Status: Stocking Keywords: iron oysters , iron canopy Size: M6, M8, M10 Standard: DIN Material: Carbon Steel, 7 color plating Unit price/kg: 20,000-45,000 VND
Material: carbon. brass, iron Finish: zinc plated Size: required Enough sizes.
Vinh Tuong Suspension Components are galvanized steel components, used in various connections in ceiling systems, including soffit cleats, suspension bolts, hanging rods, suspension rods, rod joiners, clips, and nuts. Suspension Key facts Safe and durable High tensile strength Easy to install Application Suitable for use in various connections in ceiling systems
Vinh Tuong V Corner Beads are made of perforated zinc or aluminium alloy-coated steel. Key facts High aesthetics Easy to install Prevents cracking at walls to ceiling connections Application Suitable for reinforcing external corners of drywalls and concealed ceilings, especially step ceiling systems
Steel Forged Endplate Flanges of Concrete Piles D300x180x12mm (6 holes) D350x220x12mm (7 holes) D400x250x12mm (10 holes) D500x320x14mm (12 holes) D600x400x14mm (18 holes) D600x400x16mm (18 holes) Delivery time: Negotiate Packing: bulk package then to container Payment term: By irrevocable L/C at sight
Special design in line and dot, yellow color porcelain tiles for blind people. Dimension is 300x300mm, thickness is 18mm and 15mm
- Available for A4/F4 paper. - Made of High-grade PP plastic. - Durable metal clip. - Custom colors available.
Our natural rattan wall hooks have been hand crafted from natural rattan and adds a beautiful natural warmth to any wall, nursery, bedroom or hallway. With sturdy hooks to use, the Rainbow Wall Hook is a cute way to display little treasures, bubs special outfit, or everyday items you need close at hand. Each piece has been made by hand, from natural rattan, therefore slight imperfections or colour variations are a normal feature, making each rainbow unique.
Keep Cleaning and Security, hangs hand towels, fingertip towels next to the sink, can properly wipe your hands, without throw water on the floor, remain drying not wetting that never worry about sliding. Allows a safe and neat household environment to you Functional Comfortable Style, our towel holder is definitely a must for any small bathroom as instead of taking up space.
- Material: Alloy steel - Diamater: M16 - M80, 5/8 -6 - Length: 30 - 1000mm - Pitch: 2 -6mm, 13UNC - 8UNC - Grade: 10.9 - Coatings: Black oxide, hot dip galvanized, electrolytic zinc plating.
- Material: Alloy steel - Diamater: M16 - M80 - Length: 30 - 1000mm - Pitch: 2- 6mm - Grade: 10.9 - Coatings: Black oxide, hot dip galvanized, electrolytic zinc plating.
- Material: Carbon steel, alloy steel, stainless steel. - Diamater: M16 - M80, 5/8-6 - Length: 30-2000mm, 1 1/5 240 - Pitch: 2 - 6mm, 13UNC 8UNC - Grade: 4.6 - 12.9, B7,B8 - Coatings: Black oxide, hot dip galvanized, electrolytic zinc plating.
