Standard Vietnam Rubber(SVR):TCVN(3679-2004)Based on ISO: 2000-2003. 33,33kg or 35kg/ Loose Bale
Natural rubber
TCVN 3769:2004. Packing 33.333 kgs/bale/ 35 kgs/bale.
SVR 3L is a type of rubber which is widely used in engineerings or products in daily life. Constant viscosity, flexibility, adhesion have proved the rubber as one of the most liked types of rubber in domestic market and in the world. We strongly care of quality for our our export shipments as it is very very Good for all products
* RSS 1 : Grade 1 Ribbed Smoked Sheets RSS 1 refers to Ribbed Smoked Sheets, produced from natural rubber latex as ribbed sheets, by coagulation with acids and sheeting,properly air dried and smoked, and visually graded. Ribbed smoked sheets (RSS) are graded based on visual assessment of quality. The International Rubber Quality and Packing Conference (IRQPC) have specified the grade descriptions, to establish acceptable grades for commercial usage. Specification (RSS1): Clean, dry, strong, small-scattered pinhead bubbles, free from blemishes, sand, foreign matter, under-cured Packing : • 33.33 kg/ bales, 600 bales/fcl 20 feet • Bale Packaging Normal 0.03 mm PE bag with melting temperature under 109 oC. • Thick (0.13 mm) PE bag
* RSS 3 : Grade 3 Ribbed Smoked Sheets Ribbed Smoked Sheets (RSS 3) is coagulated from high quality natural rubber latex produced by Pexim Rubbers. Rubber latex processed into ribbed rubber sheets and then sheeted, dried, smoked, and visually graded. RSS3 rubber sheets are used in the production of Tyres (tires) & Tubes, Tread Carcass, Off road tyres & ADV tyres, Extruded hoses, Footwear etc. Tyre industry is the biggest consumer of RSS3 rubber sheets. The majority of rubber is exported as ribbed smoked sheets (RSS), (over 50%), of which ribbed smoked sheet no.3 ( RSS 3 ) constitutes the major part. * Specification : Dry mould no more than 10%, clean , dry, strong, small-scattered bubbles, specks of bark, free from blemishes, sand, foreign matter, under-cured. * Used for the manufacturing: Tyres & Tubes, Tread Carcass, Off road tyres & ADV tyres, Automotive Parts, Extruded hoses, Footwear etc Packing : • 33.33 kg/ bales, 600 bales/fcl 20 feet • Bale Packaging Normal 0.03 mm PE bag with melting temperature under 109 oC. • Thick (0.13 mm) PE bag
* Description SVR 10 SVR 10 is made from field coagulum materials. The materials are precleaned by passing them through creper – hammermills and then stored some weeks for maturation before production. Mature materials are blended and soaked in the water to be clean, size reduction to crumbs, drying and baling. SVR 10 has good technological properties similar to SVR 20, but lower dirt content * Used for the manufacturing -Passenger tyres -Truck tyres, -Motorcycle and bicycle tyres -Inner tubes -Conveyor belts -Footwear. * Features Low rolling resistance. • Low endogenous heat. • High resistance to cutting • High resistance to tearing * Specification Dirt : 0.08 max Ash : 0.60 max Volatile Matter: 0.80 max Nitrogen : 0.60 max Initial Wallace plasticity (Po): 30 min Plasticity Retention Index (PRI) : 50 min *At time of production, ML 1+ 4 (100 oC) * Packing • 33.33 kg/bales or 35kg/bales, 600 bales/fcl 20 feet • In loose bale or Wooden Pallet * Bale Packaging • Normal 0.03 mm PE bag wrapper with melting temperature under 109 oC. • Thick (0.13 mm) PE bag wrapper
* Description SVR 20 SVR 20 is made from field coagulum materials. The materials are precleaned by passing them through a hammer-mill and then stored some weeks for maturation before production. Mature materials are blended and soaked in the water to be clean, size reduction to crumbs, drying and baling. SVR 20 has good technological properties similar to SVR 10, but higher dirt content * Used For The Manufacturing -Passenger tyres -Truck tyres, -Motorcycle and bicycle tyres -Inner tubes -Conveyor belts -Footwear. * Features • Low rolling resistance. • Low endogenous heat. • High resistance to cutting • High resistance to tearing • Specification * Specification Dirt : 0.16 max Ash: 0.60 max Volatile Matter: 0.80 max Nitrogen : 0.60 max Initial Wallace plasticity (Po): 30 min Plasticity Retention Index (PRI) : 40 min *At time of production, ML 1+ 4 (100 oC) * Packing • 33.33 kg/bales or 35kg/bales, 600 bales/fcl 20 feet • In loose bale or Wooden Pallet * Bale Packaging • Normal 0.03 mm PE bag wrapper with melting temperature under 109 oC. • Thick (0.13 mm) PE bag wrapper
* Description SVR 5 SVR 5 is a quality natural rubber. It is produced wholly from field latex. Field latex is preserved with ammonia or sodium sulfite. This is type of rubber which production process is the same SVR 3L grade. The field latex is coagulated with formic acid, and then make crumbs by passing through a crusher, some crepers and a shredder. After the dried crumbs are cooled and then compressed into blocks. * Used for The Manufacturing -Bicycle tubes -Rubber threads -Gas masks -Components in passenger vehicles -Components in tires * Features • Dark color than coloured SVR 3L. • Higher ash and dirt content compare with SVR 3L • High tensile strength • Good heat ageing resistance. * Specification Dirt : 0.05 max Ash : 0.60 max Volatile Matter: 0.80 max Nitrogen : 0.60 max Initial Wallace plasticity (Po): 30 min Plasticity Retention Index (PRI) : 60 min Color (Lovibond): 6 max *At time of production, ML 1+ 4 (100 oC) * Packing • 33.33 kg/bales or 35kg/bales, 600 bales/fcl 20 feet • In loose bale or Wooden Pallet * Bale Packaging • Normal 0.03 mm PE bag wrapper with melting temperature under 109 oC. • Thick (0.13 mm) PE bag wrapper
* Description SVR 10CV is produced from cuplumps. it has constant viscosity by added with only hydroxylamine neutral sulfate (HNS). It is produced through the two dryprebreakers equipment and cool processing line. This is a grade of rubber with constant viscosity. The hydroxylamine substance inhibits the storage hardening reaction in natural rubber, which leads to an increase in its Mooney viscosity. * End Use -Anti-vibration mounting products -Metal bonding -Low density sponge -Rubber–metal bonded components -Industrial rolls -Special mechanical goods. * Features • Constant viscosity rubber • Softer than technically standard other grades • Homogenous viscosity * Specification Parameters Unit Limit Test Methods Dirt (retained on 45 micron aperture) % wt 0.16 max TCVN 6089:2004 ISO249:1995 Ash % wt 0.60 max TCVN 6087:2010 ISO247:2006 Volatile Matter % wt 0.80 max TCVN 6088:2010 ISO248:2005 Nitrogen % wt 0.60 max TCVN 6091:2004 ISO1656:1996 Initial Wallace plasticity (Po) - - TCVN 8493:2010 ISO 2007:2007 Plasticity Retention Index (PRI) % 50 min TCVN 8494:2010 ISO 2930:2009 Mooney Viscosity MU 60(+7, -5) TCVN 6090-1:2010 ISO 289-1:2005 *At time of production, ML 1+ 4 (100 oC) * Packing • 33.33 kg/bales or 35kg/bales, 600 bales/fcl 20 feet • In loose bale or Wooden Pallet * Bale Packaging • Normal 0.03 mm PE bag wrapper with melting temperature under 109 oC. • Thick (0.13 mm) PE bag wrapper
* Description SVR CV50 is a constant viscosity grade. It is made by adding hydroxylamine neutral sulfate (HNS) and peptizer before coagulation with acid. The coagulum is allowed to mature some hours, reduced to crumbs by passing through a crusher, crepers, a shredder, dried and pressed into bales. The hydroxylamine inhibits the storage hardening reaction in natural rubber, which leads to an increase in its Mooney viscosity. Mooney vicosity (MV) is 50 ± 5. * Used For The Manufacturing -Vibration mountings for engines and machinery -Railway buffers -bridge bearings -Automotive components -Large-truck tire treads -Conveyor belt covers -Masking tapes -Rubber–metal bonded components * Features • Low viscosity rubber • Softness * Specification Dirt : 0.02 max Ash : 0.40 max Volatile Matter: 0.80 max Nitrogen : 0.60 max Plasticity Retention Index (PRI) : 60 min Mooney Viscosity MU 50 ± 5 *At time of production, ML 1+ 4 (100 oC) * Packing • 33.33 kg/bales or 35kg/bales, 600 bales/fcl 20 feet • In loose bale or Wooden Pallet * Bale Packaging • Normal 0.03 mm PE bag wrapper with melting temperature under 109 oC. • Thick (0.13 mm) PE bag wrapper
* Description SVR CV 60 is a constant viscosity grade. It is made by only adding hydroxylamine neutral sulfate (HNS) to ammonia preserved field latex after reception at factory. HNS is only added before coagulation with acid. The SVR CV60 rubber is processed through some stages such as crushing, creping, crumbing, drying and baling. The hydroxylamine inhibits the storage hardening reaction in natural rubber, which leads to an increase in its Mooney viscosity. Mooney viscosity (MV) is 60 ± 5. * Used For The Manufacturing -Anti-vibration mountings -Conveyor belts -Rubber and metal bonded components -Injection moulded products -Extruded products -Masking tapes -Railway buffers -Automotive components -Rubber–metal bonded components * Features • A constant viscosity rubber which hasn’t used peptizer agent . • • Constant Mooney viscosity, cleanliness, uniformity, and softness. * Specification Dirt : 0.02 max Ash : 0.40 max Volatile Matter: 0.80 max Nitrogen : 0.60 max Initial Wallace plasticity (Po) - Plasticity Retention Index (PRI) : 60 min Mooney Viscosity MU: 60 ± 5 **At time of production, ML 1+ 4 (100 oC). Viscosity limit can be based on customers’ requirement. * Packing • 33.33 kg/bales or 35kg/bales, 600 bales/fcl 20 feet • In loose bale or Wooden Pallet * Bale Packaging • Normal 0.03 mm PE bag wrapper with melting temperature under 109 oC. • Thick (0.13 mm) PE bag wrapper
Producer: G Eruco Quality : As instead of gas vietnamese standard tcvn 3769-2004 Payment: 100%L/C. Prompt shipment Packing: 33.33 Kg/bale.
Natural rubber.
Natural rubber.
Natural rubber svr10, svr20, svr 3l, rss3, cv60.
Natural rubber such as svr3l, svr5, svr10, svr20, rss3, cv50, cv60, latex ha.
Natural rubber SVR3L, SVR10, RSS3, latex.
Natural rubber.
Natural rubber.
