Secondary CR, galvanized, galvalume, HR, TMPB, painted & prepainted coils/sheets.
Window blinds.
Vinyl (PVC) Film
PLA 50-70-100µµ. MOQ 5t. Location: Spain Delivery Variant: FCA
Density 75% - 78% Location: China Delivery Variant: CIF
TD-52% MD -2% Location: Belarus Delivery Variant: EXW
.Photo finishing
Abrasives 100 lbs
LDPE film scrap, HDPE, PP, EPS, ABS.Exporter and importer
Crude Oil , Natural Gas, Natural Gas Liquids Light Distillates ( Liquefied Petroleum Gas (lpg), Naphtha, Gasoline) , Middle Distillates ( Diesel, Aviation Turbine Fuel, Kerosene, Heavy Distillates ( Marine Fuels, Residual Marine Fuels ), Residuum ( Heavy Fuel Oil, Lubricating Oils, Wax, Asphalt), Sulfur , Petroleum Coke, Petrochemicals, Chemicals, Textiles, Healthcare, Hospitality, Agricultural, Metals, Engineering And Infrastructure.
solvent based fire retardant paint, based on special resins and Chemicals. The dried film gives good resistance against fire and Protection to base substrate. RECOMMENDED USES As fire retardant topcoat paint on wood, steel and concrete surface. At recommended thickness it has excellent fire retardant properties. ADVANTAGES One component special resin based paint, easy to apply, excellent water, weather and U.V. resistance. Dry film has excellent fire retardant properties
A general-purpose alkyd based primer with anticorrosive red iron oxide pigment for the protection of steel surfaces against moderate corrosive environments.It is an economical anticorrosive primer for general-purpose applications. USES It is recommended for mild steel structures and surfaces in domestic and mild corrosive environments. It is suitable for interior and exterior use. PROPERTIES Colour, Dry Film : Red Finish, Dry Film : Smooth/Matt Volume Solids, % 51�± 2 Specific Gravity : 1.46�± 0.05 Theoretical Spreading Range : 11-12 M2/L Recommended Dft Range (Dry Film Thickness) : 35-45 Microns/Coat Recommended Wft Range (Wet Film Thickness) : 75-90 Microns/Coat Flash Point : 38 �° C Flexibility : Good Drying Time : @ 30 �° C (Temperature, humidity, air movement, film thickness and number of coats all affect the drying time.) Dry To Recoat/Overcoat : 12 Hours Hard Dry : 24 Hours
call for price ********************** 100 million to 500 million sq yards avail $.31 We have some high quality manufactured Spunlace that we are looking to sell at a onetime buy. Product is in one of our facilities in your area and wanted to see if you would be interested to purchase at a discounted price. We are looking at moving this inventory within the next week at we have around 315MSY in base roll form. * Precision Cleaning Cloth_Basesheet_MSR SPEC-12958 SAP Stock Code 46 roll: SAP # 70195836 34 roll: SAP # 70195880 Product Safety Clearance # IPSCS-FP-2016-0130 Precision Application Solvent cloth is a white spunlace basesheet suitable for critical wiping and solvent application. Three formats are offered, i.e., flat sheet, center-pulled roll, and quarter-fold. PET staple fiber, Spuntech Trevira T262 Specific Energy 0.262 (kwh/kg) PET fiber 38mm, 1.4DPF, 80% T262 (Bi-component) fiber, 51mm 51mm, 2.2 Dtex, 20% Slit roll width 2 x 46, 1 x 34 Roll diameter 47
Used Rail R50/65 Procedure : - Buyer sends LOI -Seller answers with FCO. -Buyer receives FCO and sends LC draft from his bank to the buyer's bank. -Seller prepares contract and issues Invoice(s) with company ID code . - Buyer sends a non-activated LC in anticipation to receiving the proof of product( POP) and the performance bond (PB) 20% in favor of the buyer . -Seller sends through his bank to the seller bank the PB operative only after LC is activated , together with the POP to the buyer's bank including : a-certificate of ownership b-certificate of origin c-Quality and Quantity report from SGS . d-photos and video for the needed steel . e- formal invitation to the buyer's representative to visit the warehouses to view the needed steel . f-Buyer bank activates the LC.
TEX PRIMER WHITE Tollens Tex primer is an acrylic co-polymer primer with very fine aggregates, specially designed for priming masonry surfaces for all water based textured paints PROPERTIES Colour : White Solids: 45% +/- 2% Theoretical Coverage 9 -10 m2 Recommended film thickness: dry 30u wet 80u DRYING TIME â?? AT 25 �° To touch: 1 hour To Recoat: Min. 5 hours Vehicle type: acrylic co-polymer Specific gravity: 1.55
Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion. PROPERTIES Colour : Full spectrum Solids: 50 +/- 2 % Theoretical Coverage 10 - 11 m2/lit DRYING TIME : AT 25 C To handle: 3 hours To Recoat: 5 hours Flash point: 27C Specific gravity: 1.10 �±0.05 Pot life: 6 hours Mixing ratio: 4 parts base "A" :1 part hardner "B" Solvent: Polyurethane thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
A two pack high build epoxy Polyamide based under coat containing inert pigments. It is recommended as a final coat in an Epoxy system CHARACTERISTICS High build in single coat. Excellent resistance to fresh and salt water Abrasion resistance and flexible films. Excellent inter-coat adhesion. Resistant to solvents. Resistance to mild acids. USES Coating for long term protection for structural steel, concrete surface and internal lining of edible oil tanks, and fuel tanks. Suitable for marine installations, power plants, fertilizers, hospitals, laboratories, etc.
The SpyderÆs low center of gravity Surrounding Spar Technology (SST) steel frame surrounds its Rotax 990cc, liquid cooled V-Twin engine that puts out 106hp at 8500rpm and peak torque of around 104Nm at 6250rpm. Rotax engines have been proven over a period of 80 years (BRP purchased the company in the 70Æs). Noteable Features Unique to the Phantom: * Semi-Automatic Transmission (SE5) * 6-Spoke Custom Wheel Kit * Limited Edition Color (Pearl White) * Special Edition Seat * Spyder Rolling Travel Bag The SpyderÆs low center of gravity Surrounding Spar Technology (SST) steel frame surrounds its Rotax 990cc, liquid cooled V-Twin engine that puts out 106hp at 8500rpm and peak torque of around 104Nm at 6250rpm. Rotax engines have been proven over a period of 80 years (BRP purchased the company in the 70Æs). Noteable Features Unique to the Phantom: * Semi-Automatic Transmission (SE5) * 6-Spoke Custom Wheel Kit * Limited Edition Color (Pearl White) * Special Edition Seat * Spyder Rolling Travel Bag
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 ± 2% Specific gravity 1.40 at 25 C Theoretical Coverage 3 5 m2/lit (@ 70u M) DRYING TIME : AT 25 T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen coal tar Flash Point: 35C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10C - +70 C
Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents. PROPERTIES Colour : black Solids : 70 �± 2% Specific gravity 1.40 at 25�° C Theoretical Coverage 3 â?? 5 m2/lit (@ 70u M) DRYING TIME :â?? AT 25 �° T To touch: 15 min To Recoat: 2 hours Max.overcoat interval: Not applicable Vehicle type: bitumen â??coal tar Flash Point: 35�° C. Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10�° C - +70�° C
