British Steel Tubes Suppliers and Manufacturers

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

Better grip and braking thanks to motorsport derived technology. Adaptive compound for a â??racingâ?? grip and improved braking performance. Massive outer shoulder block for increased stability and improved handling during cornering. The Dunlop SP Sport Maxx RT is a summer tyre which borrows from Dunlop's extensive knowledge in producing race tyres to provide you with motorsport level grip and braking. Dunlop have designed the SP Sport Maxx RT with intuitive compound technology that adapts to the conditions to deliver safe and responsive grip in both wet and dry conditions. The compound of the Dunlop SP Sport Maxx RT features polymers that conform to the contours of the road - helping to maximise the contact between the tyre and road, increasing the tyre's levels of grip. Around the shoulder of the tyre Dunlop have contructed 'Short Braking' blocks to ensure shorter braking distances when you are travelling at high speeds. When braking these blocks increase to allow more of the tyre to come into contact with the road. Keen to deliver a fuel efficient design, Dunlop have ensured the tyre is made with a lightweight construction - reducing the rolling resistance of the tyre and in turn the CO2 emissions when driving

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

An endobronchial tube is a medical device designed for use in the respiratory system, specifically within the bronchial tubes. These tubes are used in various medical procedures, such as bronchoscopy, endobronchial intubation, and lung surgery. The primary purpose of an endobronchial tube is to maintain an open airway and facilitate the delivery of oxygen or anesthesia to the patient's lungs during surgical or diagnostic procedures. Key features and uses of endobronchial tubes include: Bronchoscopy: Endobronchial tubes are often used in bronchoscopy procedures, allowing physicians to visually examine the bronchial tree and perform diagnostic or therapeutic interventions. Lung Surgery: During certain lung surgeries, endobronchial tubes may be employed to isolate and collapse one lung, providing a clear field of view for the surgeon. Ventilation: Endobronchial tubes can be used for selective lung ventilation. They can be positioned to direct ventilation to a specific lung, allowing the other lung to be collapsed or isolated. Anesthesia: In some cases, endobronchial tubes are used for delivering anesthesia during thoracic surgeries or procedures.

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00