The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring.
Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace.
Please feel free to contact us for further details
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
For further details feel free to contact us.
5049 Raw Material For Wires Cables Suppliers
Short on time? Let Raw Material For Wires Cables sellers contact you.
We are glad to propose 500 MT of stain less steel mill scale.
Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products.
At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel.
The recovery ratio after melting in furnace for the most valuable alloy elements is:
- Ni: 3.5 - 4.5%
- Cr: 6-8%
From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows:
Waste code: 10 02 10
The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers.
Chemical analysis of the material is available on request.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces.
Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%.
The max weight of each pieces is up to 1 ton.
The material can be loaded loose in 20 heavy duty container.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA
Incinerator bottom ash).
It can be classified as follows:
Basel code B1010.
EW Code: 17 04 02.
With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks.
This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape.
The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace).
The stock can contain all kind of aluminium packing.
We can currently provide this material in three different fractions and with different aluminium content:
3-8 mm split in two different qualities:
65% ± 3% Al
85% ± 3% Al
8-16 mm: about 70% ± 3% Al
16-60 mm: about 80% ± 3% Al
The material contains minor impurities typically stones, ash, glass.
Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed.
The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills.
It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color.
Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating.
From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list
In particular the mill scale can be classified as follows:
Einecs (european commission no.): 266-007-8
Waste code: 10 02 10
Basel code: b 12 30
Hs code: 2619.00
These cast iron skulls are a by-product derived from the cast iron foundries. The byproduct is a ferrous by-product which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes.
The material is separated by magnet and screener.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
We offer a wide range of durable and long-lasting Cable wires that fulfil varied requirements of many industries. Our varied assortment includes both the simplest constructions to the complicated wire designs. With time, we have got in-depth knowledge of the industry. We facilitate changing and redesigning of existing products to meet specifications provided by our clients. Our range of cable can be availed with various properties such as flexible, multi-coloured, etc. Durability and efficiency are the main attributes of our products. Our product range is tested for accuracy and efficiency in order to ensure trouble-free functioning. We are specialized in Power Cables, Control Cables, Instrumentation Cables, Industrial Cables, Agricultural Cables, Shielded Cables, Flexible Cables, etc.
Flame Retardant PVC Insulated Single Core Unsheathed Copper Cable (up to 1100V AC)
Compact Contraction reduces weight per meter.
Rugged yet flexible for industrial use.
High-temperature insulation
Two Layer Single Core FR/ FRLS PVC Insulated Copper Conductor (Unsheathed) Heavy
Duty Electric Cables in Voltage Grade up to & including 1100V as per 1S-694
We are suppliers of BEST QUALITY Copper Wire ScrapAnd Looking for serious buyers in need of our products, contact with us for more details.
Copper wire scrap refers to discarded or waste copper wires and cables that are no longer in use and are collected for recycling purposes. These scraps can come from various sources, including industrial processes, construction and demolition sites, electrical and electronic equipment, and more. Copper wire scrap is valuable for recycling because copper is a highly sought-after material due to its excellent electrical conductivity and other useful properties. Here are some key points about copper wire scrap: Collection: Copper wire scrap is collected from various sources where copper wires and cables are no longer needed. This can include old appliances, electronics, discarded wiring, and more. Sorting and Processing: Once collected, the copper wire scrap needs to be sorted and processed. This might involve removing any non-metallic attachments, such as insulation, plastic coatings, or other materials. The goal is to obtain a relatively pure copper material for recycling. Recycling: The sorted copper wire scrap is then typically processed through various recycling methods. One common approach is to chop or shred the scrap into smaller pieces, which are then melted down in furnaces to separate the copper from any remaining impurities or coatings. Refining: After melting, the recovered copper is further refined to ensure its purity. This can involve processes like electrolytic refining, similar to the process used to produce copper cathodes. The result is high-quality copper that can be used for various applications. Applications: The recycled copper obtained from copper wire scrap can be used to produce a wide range of copper-based products. These include new wires and cables, plumbing pipes, electrical components, and more. The recycled copper retains its excellent electrical and thermal conductivity properties, making it valuable for industries that require such characteristics.
We are factory supplier of all types of plastic raw materials like ABS, EPS, HDPE, LDPE, LLDPE, PA, PET, PLASTIC MASTERBATCHES, PLASTIC RAW MATERIALS, POM, PP, PPO, PS, PTFE, PVC, PVDF. Aluminium and copper for wholesale buyer. Kindly please contact us for any inquiry about scraps, we are leading supplier.
Filler masterbatch CACO3, Color masterbatch Factory Sales, Plastic Companies supplier, Quality colorful plastic masterbatch, Thermochromic Plastic, Fibreglass reinforced plastic, Pet granules suppliers, Black masterbatch CACO3 Filler, PA66 factory for sale, Clarian PVC pipe wax, plastic insulator materials, Plastic polythene injection, is polypropolene, CACO3 filler masterbatch, Quality PVC granules,HDPE Granule, Proporlene plastic virgin, Granules film grade, PP Recycled pelltes mask, idpe recycled granules, pvc regrind scrap, pla bio degradable, Plastic pets granule.
We are factory supplier of all types of plastic raw materials like ABS, EPS, HDPE, LDPE, LLDPE, PA, PET, PLASTIC MASTERBATCHES, PLASTIC RAW MATERIALS, POM, PP, PPO, PS, PTFE, PVC, PVDF. Aluminium and copper for wholesale buyer. Kindly please contact us for any inquiry about scraps, we are leading supplier.
Filler masterbatch CACO3, Color masterbatch Factory Sales, Plastic Companies supplier, Quality colorful plastic masterbatch, Thermochromic Plastic, Fibreglass reinforced plastic, Pet granules suppliers, Black masterbatch CACO3 Filler, PA66 factory for sale, Clarian PVC pipe wax, plastic insulator materials, Plastic polythene injection, is polypropolene, CACO3 filler masterbatch, Quality PVC granules,HDPE Granule, Proporlene plastic virgin, Granules film grade, PP Recycled pelltes mask, idpe recycled granules, pvc regrind scrap, pla bio degradable, Plastic pets granule.
Flake plastic scrap low rate, pp filler black master batch, regidity pom impeler ppo, plastic high temperature heat, price of scrap aluminium, lead prices per pounds, scrap price of steel, scrap price of brass, how much does plastic cost, price of scrap aluminium.
Worldwide with a very good range of prices.The plastic recycling companies are playing the most appreciable job in preventing the environment from getting polluted by using plastic scrap in the process of recycling and make it reusable. PRM limited is one of the most popular companies that explored a huge appreciation for providing a great efficiency and effective plastic recycling process.
Trustex gloves are premium nitrile gloves that are perfect for various applications. With their superior durability, Trustex nitrile gloves provide excellent hand protection without compromising on comfort.
Trustex gloves provide exceptional protection and dexterity, with textured fingertips for added grip. Crafted from premium nitrile material, these gloves are latex-free, which reduces the risk of allergies and irritation. They are also powder-free, eliminating the mess and discomfort associated with traditional powdered gloves.
Suitable for industrial work, food handling, or general-purpose use. Trustex disposable nitrile gloves are trusted for reliable performance, quality, and peace of mind. Available in three sizes: small, medium, and large.
Suitable for a variety of minimal risk activities including but not limited to: Cleaning, Beauty Therpay, Parts Handling, Painting and Finishing Services, Food Preparation, Tattoo Care, Pet Care, Child Care, Technicians, Mechanic, Hair Dressing
Features Include:
Latex-Free
Powder-Free
Chemical Resistant Nitrile
Fingertip Textured and Beaded Cuff
Reduces risk of allergy
Tough & Flexible (Quality & Strength)
Good resistance
Food Safe
Non-Sterile
Single-use ambidextrous gloves
Trustex Nitrile Gloves are also tested according to ISO 21420:2020 and Cat 1 according to: PPER (EU) 2016/425
Trustx gloves meet AQL 1.5 as per EN455 and ASTM prescribed standards
Manufactured by Karex, the world's largest condom manufacturer
5049 Raw Material For Wires Cables Suppliers
Short on time? Let Raw Material For Wires Cables sellers contact you.
