Product Description Mixing opener is suitable for all classes of raw cotton (usually for those with high maturity and higher class). These are placed in the front of the automatic plucker, and transmitted them to a small block brought by the automatic plucker raw cotton into the machine with the aid of Condenser add on (additional item), open and remove some impurities and dusts, then suck the raw cotton into the platform with its condenser. Technical Specifications Production Kg/h: 800 Kg/h Width in mm: 1060 Trash extraction efficiency: Trash extraction 3.5/hour, usually about 30-35% Spiked apron speed: 1, 1.25, 1.5, 1.75 m/min Bales speed: 60x 70x 80 100 m/min Press apron speed: 1x 1.25x 1.5x1.75 m/min Evening roller diameter/rotating speed: 260mm\200r/min Spike beater diameter/rotating speed: 400mm\400r/min Knife beater diameter/rotating speed: 400mm\430r/min Small hedgehog beater (1) diameter/rotating speed: 400mm\700;800;900r/min Small hedgehog beater (2) diameter/rotating speed: 400mm\745;850;960r/min Grid bars type/interval space: Flat steel grid bar spike knife double beater 12-22Small hedgehog beater (1) First group 12-22mm Second group 10-22mm Small hedgehog beater (2) 10-22mm Spike, knife beater and grid bar: Entrance10-15mm Exit12-20mm Hedgehog beater (1) and grid bar interval space: Entrance10-14mm Exit13-17mm Hedgehog beater (2) and grid bar interval space: Entrance10-15mm Exit15-20mm Press apron and spiked apron interval space: 60-80mm Spiked apron and evening roller interval space: 40-80mm Spiked apron and spike beater interval space: 5mm Motor specification: Rotating beater 6-4kw (left) 1430r/min Rotating spiked apron 2-21-6 0.6kw 930r/min Rotating Spiked apron 0-100 0.37kw 14r/min Size (LxWxH) mm: 5358x1430x3696 including Condenser Machine weight: 4200 Kg
Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to /
Product Description Waste Recycling Machine adopts a leading technology. It superfine new tearing machine for textile waste which are with porcupine roller with diameter 600 -1000 mm each cylinder with difference angle and specifications taper-pins. The feeding rail adopts elastic rubberised roller with diameter 150 - 250 mm. The working width from 1000-2000 mm and the maximum capacity up to 2500kg per hour. Technical Specifications Machine TMI 60.17.1.2000416a Processing Capacity (kg/h): 160~180 Drum Diameter (mm): 250 Drum Weight (Kg/Drum): 420 Working Width (mm): 1000 Installed Power (Kg/h): 5.5*N Outside Dimension (LxWxH) (mm): 10200x1800x1400 Machine TMI 60.17.1.2000416b Processing Capacity (kg/h): 220 ~ 280 Drum Diameter (mm): 400 Drum Weight (Kg/Drum): 640 Working Width (mm): 1000 Installed Power (Kg/h): 7.5*N Outside Dimension (LxWxH) (mm): 11600x1800x1400 Machine TMI 60.17.1.2000416c Processing Capacity (kg/h): 300 - 350 Drum Diameter (mm): 600 Drum Weight (Kg/Drum): 600 Working Width (mm): 1000 Installed Power (Kg/h): 22+15*(N-1) Outside Dimension (LxWxH) (mm): 14400x1800x1450 Machine TMI 60.17.1.2000416d Processing Capacity (kg/h): 450 - 550 Drum Diameter (mm): 600 Drum Weight (Kg/Drum): 600 Working Width (mm): 1500 Installed Power (Kg/h): 30+18.5*(N-1) Outside Dimension (LxWxH) (mm): 14400x2300x1450
Product Description Automatic Cone winder inherits the advantages of a series winder, adopts brand-new profile design & is featured by beautiful and dignified features. It adopts the brand-new smart anti-pattering device, new type of tension control system and new type of balloon central mechanism to ensure perfect package building, more even winding tension, high machine operation stability and reliability to meet customer requirement. Technical Specifications Machine Type: Single Spindle, Single Sided, LH Machine or RH Machine Application: Single of Cotton, Wool, Man-made staple fiber or their blends, yarn counts from Nm 3.5 to the highest Winding Speed: 400 - 2200 m/min, Step less adjustable No. of Spindles: 12 - 54 Spindles, every 4 spindles one extension Spindle Pitch: 320 mm Package Taper: 3'30", 4'20", 5'57", 9'15" Feeding Packages:
Product Description industrial dehydrator machine,extractor machine,dewatering machine,use 304 stainless steel,Dewatering machine is a washing equipment, generally used to remove water during the washing items of clothing, textile articles, and other crops after. After dehydration reuse dryer to dry, you can achieve the effect of completely drying. It has the following advantages: > Roller is made from good quality stainless steel, it is with strong acid resistance and alkali resistance, durable; > With fast dehydration speed, high dehydration efficiency and without any damage to cloths; > It is with compact structure, small space needed, and with reliable performance. Suitable for factory ,hospital,laundry service, etc. Works The main components of the dryer is stainless steel, cloth liner around the hole to be dehydrated in the laundry is placed in a stainless steel liner. High Speed rotary motor driven by a belt stainless steel liner. So have a great centrifugal force and therefore left out of water through the hole on the liner, unified discharged after being collected. Features industrial dewatering machine For wet clothes dryer work for two minutes achieved the same effect as the first 20 minutes the drying achieved similar results with the dryer work, but not completely dry the laundry dryer, so saving time and energy than the approach is first to wet clothes before dewatering operations, finished off the water and then drying operations. Technical Details Model: 45.7.7.200418a Rated Capacity: 20 Water extraction capacity: 900 Drum Volume: 62 Motor Power: 1.1 External Dimension: H: 680 W: 900 Machine Weight: 238 Model: 45.7.7.200418b Rated Capacity: 30 Water extraction capacity: 820 Drum Volume: 97 Motor Power: 1.5 External Dimension: H: 700 W: 1000 Machine Weight: 266 Model: 45.7.7.200418c Rated Capacity: 35 Water extraction capacity: 820 Drum Volume: 126 Motor Power: 3 External Dimension: H: 750 W: 1100 Machine Weight: 342 Model: 45.7.7.200418d Rated Capacity: 50 Water extraction capacity: 820 Drum Volume: 180 Motor Power: 4 External Dimension: H: 820 W: 1250 Machine Weight: 521 Model: 45.7.7.200418e Rated Capacity: 70 Water extraction capacity: 800 Drum Volume: 263 Motor Power: 5.5 External Dimension: H: 880 W: 1500 Machine Weight: 728 Model: 45.7.7.200418f Rated Capacity: 100 Water extraction capacity: 800 Drum Volume: 298 Motor Power: 5.5 External Dimension: H: 900 W: 1600 Machine Weight: 878 Model: 45.7.7.200418g Rated Capacity: 120 Water extraction capacity: 800 Drum Volume: 429 Motor Power: 7.5 External Dimension: H: 1000 W: 1750 Machine Weight: 1050
Product Description Computer control, with automatic programs and manual programs for choice. The working condition can be displayed on the screen directly. It is available to run in one-way direction and two-way direction. Drying work can be done at the upper and nether dryers together. Improve the drying efficiency, save the space and labor. Cool and hot air programs for choice, especially meet the drying need for high grade clothes material. Four heating models for choice: electric heating, steam heating, LPG gas heating, natural gas heating.
TMI 45.14.5.200421 - Double Stack Coin Washer Extractor Dryer All In One Product Description Computer control, with automatic programs and manual programs for choice. The working condition can be displayed on the screen directly. Washing and drying work can be done at the upper and nether machines together. Improve the working efficiency, save the space and labor. The inner washing drum is designed with strong bearing structure to meet the high quality of washing and extracting need. About the washer, there are cold water and hot water inlets. There are electric heating model and steam heating model for order. About dryer, four heating order models for choice: electric heating, steam heating, LPG gas heating, natural gas heating.
TMI 45.15.6.200421 - Single Stack Coin Drying Machine Product Description Computer control easily. Cool down the drying material automatically for safe use. It is available to run in one-way direction and two-way direction. The machine is with wool fiber clean system, with cool and hot air choice programs, This can ensure the ideal drying effect, special for high grade clothes. Four heating models for choice: electric heating, steam heating, LPG gas heating, natural gas heating.
TMI 45.16.7.200421 - Single Stack Coin Drying Machine Product Description Computer control easily. Cool down the drying material automatically for safe use. It is available to run in one-way direction and two-way direction. The machine is with wool fiber clean system, with cool and hot air choice programs, This can ensure the ideal drying effect, special for high grade clothes. Four heating models for choice: electric heating, steam heating, LPG gas heating, natural gas heating.
TMI 45.17.8.200422 - Single Stack Coin Washer-Extractor Machine Product Description Adopt advanced inverter control system, save electricity consumption. It is available to adjust extracting speed to meet the different mate washing need. With memory function of running if the power is off suddenly. Low noise, low shock, drain at the back place, easy to control.
TMI 45.19.10.200422 - Gas Heating Industrial Drying Machine Product Description Newly developed energy saving industrial dryers. Easy to operate, wide drying application. High heating efficiency, convenient to use suitable for LPG or LNG. Low energy consumption, fast heat exchange and efficient heat energy application. Drum with well spread large punched holes which ensure sufficient hot airflow so that clothing is evenly dried. Big loading/ unloading door design to allow easy loading/unloading. Door rim is being designed so that clothing can be uploading from drum with ease. Equipped with safety door lock to prevent drum from rotating when loading door being opened. "Pull out" type of filter system which allow easy cleaning. It has powerful suction fan with large blade to facilitate good air flow and preventing ducting get stuck with dust and dirt. V-belt driven with speed reduction. Low noise level, low vibration, durable and easy to maintain. Micro-processor control system allows drying time and temperature setting using soft-touch key pad. The controller is well fitted to give good physical appearance.
TMI 45.50.2.200430 - Safety Cover With Bearings Accessory Machine Product Details Use: Food, industrial cleaning fluid recovery from water, oil removing machine. Short introduction: TMI 50.2.200430a Four bearing,stainless steel safety cover 90GB copper motor TMI 50.2.200430b Four bearings plastic safety cap 90GB copper moto TMI 50.2.200430c Two bearing stainless steel safety cover 90GB copper motor TMI 50.2.200430d Two bearings plastic safety cap 90GB copper motor TMI 50.2.200430e Four bearing stainless steel safety cover 90GB copper motor Loading and unloading material in both inside and outside the network
New Washing Machine
Product Description Dust Collector innovative concept is about filtering media which is placed on the two sides of filtering groove, and suction nozzles mounted on the suction arms which are then driven by patented mechanism revolves for intermittent dust collection. Its convincing advantages: compact, reliable, efficient & economical. â?? Working principle: Electrical unit consisted of the first-stage disc pre-filter and the second stage multiple round cage dust-filter. The first stage filter is used to extract, separate, collect the fibrous dust in the processing air; The second stage filter is used to filter out the fine dust from the air exhausted from the first stage filter.
Product Description Condenser is commonly used for the opening flow. Use blower and card pipe transmitting raw cotton or chemical fiber and the original cotton is condensed at the surface of dust cage with the suction of the blower and then stripped from it by beater, and go through the trash extraction of dust cage. Rich specifications for selection. Different power for different position in the flow. There are bypass devices at the top of this condenser and the raw cotton can be straightly transmitted to the next platform through this path. Technical Specifications Production kg/h: 800 Dust cage diameter mm: 500 Beater type: 6-Wing Blower diameter mm: 500 Blowing rate: Around 4500 General Power Kw: 4 Size (LxWxH) mm: 1721x800x1000 Machine weight kg: 600
Product Description The separator is used for cotton cleaning process and is directly installed in a conveying duct, which can detect and remove effectively the metal impurities and spark in textile fiber. It is an importance equipment for ensuring safety in production. Technical Specifications Power Source: AC220V 50HZ,60HZ Sensitivity: Spark-1mm,visual angle no less than 90 metal-no less than 2mm steel ball Response time: Millisecond level Cotton speed range in conveying duct: 5-18m/sec Dia. Of conveying duct: 300 mm
Product Description Chute feeder has a good effect on open & low fiber damages. Two feed rollers feed materials to prevent from warping. The feed rollers controlled by inverter. It is mounted with protection unit. The space between feed rollers and feed rollers/open roller is adjustable. The vibrant favourable for forming even and uniformity fiber batt. The output roller draft for improving sliver evenness. The sliver evenness is improved. Technical Specifications Suitable fiber: All synthetic and mixed fibers which are less than 76mm Working width (mm): 950 Production (kg/h): 100 Diameter of feed roller (mm): 120 Diameter of opening roller (mm): 266 Blower speed (rpm): 2840 Air displacement: 600m3/h -500pa Installed power (Kw): 2.85 Overall dimension (Wx Lx H) (mm): 1614 x 600 x 2800 Net weight (kg): 1400â??
ETRO 6+ is a high quality Group III+ base oil, manufactured from a unique feedstock by using a proprietary hydrotreatment and wax isomerization process and is hydrofinished to a colourless liquid. The base oil is highly isoparaffinic and exhibits a very high viscosity index as well as superior low temperature performance. It has an excellent viscosity-volatility relationship. Applications: ETRO 6+ is an excellent choice for formulating cost effective, high performance, low-viscosity engine oils due to its superb viscometrics and low volatility. This base oil is also suitable for application in industrial equipment, such as compressors, hydraulic systems, gears and turbines. Features and Benefits: Very high viscosity index Excellent volatility for low viscosity engine oils Superior low temperature performance Good oxidation stability Formulation Support: ETRO 6+ is supported with top-tier engine oil formulations that meet the requirements for: API SN ILSAC GF-5 ACEA 2012* OEM Specifications
EQUINAS NBO 60u is a high-quality Naphthenic Base Oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Naphthenic base oil is a type of mineral oil that is produced through the refining of crude oil. It characterized by its composition of saturated cyclic hydrocarbons called naphthene. Naphthenic base oils are used in a wide range of applications, including automotive lubricants, transformer oils, metalworking fluids, rubber and tire manufacturing, and more. They are particularly well-suited for use in applications where low-temperature performance is critical, such as in hydraulic fluids, refrigeration oils, and compressor lubricants
