Product Description
The separator is used for cotton cleaning process and is directly installed in a conveying duct, which can detect and remove effectively the metal impurities and spark in textile fiber. It is an importance equipment for ensuring safety in production.
Technical Specifications
Power Source: AC220V 50HZ,60HZ
Sensitivity: Spark-1mm,visual angle no less than 90 metal-no less than 2mm steel ball
Response time: Millisecond level
Cotton speed range in conveying duct: 5-18m/sec
Dia. Of conveying duct: 300 mm
Product Name: LITHIUM METASILICATE Synonyms: LITHIUM SILICATE, 99.5%LITHIUM SILICATE, 99.5%LITHIUM SILICATE, 99.5%LITHIUM SILICATE, 99.5%;LITHIUM METASILICATE in stock Factory;LITHIUM METASILICATE;LITHIUM SILICATE;LITHIUM SILICATE (META);dilithium metasilicate;Lithiummetasilicate,99%;Lithium metasilicate, 99.5% (metals basis) CAS: 10102-24-6 MF: Li2O3Si MW: 89.97 EINECS: 233-270-5 Product Categories: metal silicate Mol File: 10102-24-6.mol Application Lithium metasilicate is an inorganic compound that has a high resistance to heat and acid. It is used as an additive to zirconium oxide membranes, which are used in membrane separation processes. It has been shown to have a high transport capacity for water vapor and sodium carbonate. This property makes it suitable for use in the clinical setting where it has been shown to have biological properties and clinical relevance.
Metal separation equipment Full set metal separation equipment includes the following processes: primary coarse crushing, secondary grind breaking, magnetic separation, screening, window separation hydraulic gravity separation, electric separation and a series of processes, when passing through the above processes, it can separate iron, copper, aluminum from impurities with each other, and the different metals, purity can reach more than 98%. The equipment is plc fully automatic control, only need to one or two people , using physical dry separation without burning , chemical raw materials and environmental pollution, small covers, low energy consumption, high purity, high production, easy maintenance, etc. It is mainly used in the recycling -reusing industry such as waste automobiles, waste radiator, waste the motor stator, waste electrical appliances and waste industrial equipments. Company commitment: the company has sales of metal separation equipment has a perfect after-sales service, one year warranty, life-long maintenance, thoroughly solve your trouble back at home, please rest assured purchase! Metal separation equipment
We produce industrial machines for separating: - 01-01 COPPER WIRES - 01-02 ALUM SCRAPS - 01-03 AC SR (CABLES) - 01-04 ELECTRIC MOTORS - 01-05 RADIATORS HEAT EXCHANGE - 01-06 ALUM/ GLASS FIXTURES - 01-07 R4WEEE/ ELECT - 01-09 R1WEEE FRIDGE - 01-10 CAR DISMISSION & COMPACTING
Roller Conveyor Shot Blasting Machine for Bright Bars Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 1 Unit Per Month Price And Quantity Price Range 100000.00 - 300000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications: Product Type Other Warranty All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Operating Type Automatic Usage/Applications Casting, Forging, Sheet Metal Pressure 6-7 Bar Power 420 Volt (v) Color Dark Blue Surface Treatment Painted Technology Other Product Description: TheTunnel type/ roller conveyor shot blasting machine is best suitable for the shotblasting of Round steel Pipes..etc. It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 no�?�¢�?â?¬�?â?¢s of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinet�?�¢�?â?¬�?â?¢s bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Price Range 1200000.00 - 1500000.00 INR/Unit Minimum Order Quantity 1 Unit Product Specifications: Color Dark Blue Product Type Other Pressure 6-7 Bar Power 420 Volt (v) Power Source Electricity Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Technology Other Usage/Applications Casting, Forging, Sheet Metal Operating Type Automatic Surface Treatment Painted Product Description: It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 nos of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinets bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Product Specifications: Operating Type Automatic Technology Other Product Type Other Color Dark Blue Pressure 6-7 Bar Usage/Applications Casting, Forging, Sheet Metal Surface Treatment Painted Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Power Source Electricity Power 420 Volt (v) Product Description: It consists of inlet and outlet side Rollerconveyors as material handling systems. The components to be blasted are placedon inlet side of the roller conveyor, from where it travels forward and entersinto the inlet tunnel. After passing through the inlet tunnel components entersinto the blast zone which consists of 4 nos of Blast Wheels. All these Blast wheel units are strategically placedaround the Blast cabinet. The arrangement of the blast wheel ensures optimum blastcleaning and maximum utilization of the abrasive energy.Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blastedmaterial moves forward and enters into the outlet tunnel. The spent abrasivefrom blasting operation after passing through the perforated floor plates willget collected into the cabinets bottom storage hopper. From where it istransferred to the bucket elevator, which elevate the abrasivevertically and discharges the same into a media separation unit where dust andfine abrasives are cleaned ensuring that only clean abrasive will re-circulateto the blast wheel units for effective and better cleaning. A Dust collectionsystem is provided with the machine which will continuously remove the dust andfine particles, thus keeping the inside of the machineand the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 2500000.00 - 3000000.00 INR/Number Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Product Type Other Power Source Electricity Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Color Dark Blue Technology Other Operating Type Automatic Surface Treatment Painted Pressure 6-7 Bar Product Description: The Tunnel type/ roller conveyor shot blasting machine is best suitable for the shot blasting of I/H-Beam /Structural Steel Components etc. It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 nos. of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 2000000.00 - 2500000.00 INR/Number Product Specifications: Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Weight (kg) 3.5-4 Metric Ton Color Dark Blue Product Type Other Power 420 Volt (v) Usage/Applications Casting, Forging, Sheet metal etc Operating Type Automatic Surface Treatment Painted Technology Other Power Source Electricity Product Description It consists of inlet and outlet side Roller conveyors as material handling systems. The components to be blasted are placed on inlet side of the roller conveyor, from where it travels forward and enters into the inlet tunnel. After passing through the inlet tunnel components enters into the blast zone which consists of 4 no's of Blast Wheels. All these Blast wheel units are strategically placed around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity on the forward moving components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected in to the cabinet's bottom storage hopper. From where it is transferred to the bucket elevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that only clean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine which will continuously remove the dust and fine particles, thus keeping the inside of the machine and the near by environment dust & pollution free.
Product Details: Product Type Other Technology Other Power Source Electricity Operating Type Automatic Power 420 Volt (v) Pressure 6-7 Bar Surface Treatment Painted Supply Ability : 7-10 Unit Per Month Price And Quantity: Minimum Order Quantity 1 Unit Price Range 1200000.00 - 1500000.00 INR/Unit Product Specifications: Power Source Electricity Surface Treatment Painted Product Type Other Technology Other Power 420 Volt (v) Warranty: All our machines are warranted for 12 months from the date of commissioning or 15 months from the date of dispatch whichever is earlier against all manufacturing defects. However this warranty not covers parts consumed at normal wear and tear during operation like rubber goods & parts in continuous contact of abrasive media and also any damages due to misuse or improper handling of the machine at customer premises. The warranty will lapse if customer uses spurious spare parts purchased from any other buyer on the machine and fail to operate and maintain the machine in accordance with the instructions. Pressure 6-7 Bar Color Dark Blue Usage/Applications Casting, Forging, Sheet Metal Operating Type Automatic Product Description: The diabola conveyor shotblasting machine is best suitable for the shot blasting of round BARS. Itconsists of inlet and outlet side diabola conveyors as material handling systems. The components to be blasted are placed on inlet side of the rollerconveyor, from where it travels forward and enters into the inlet tunnel. Afterpassing through the inlet tunnel components enters into the blast zone which consists of 1 no. of Blast Wheel. This Blast wheel unit is strategicallyplaced around the Blast cabinet. The arrangement of the blast wheel ensures optimum blast cleaning and maximum utilization of the abrasive energy. Blast wheels fires the abrasive at high velocity onthe forward moving & rotating components & blast cleans them thoroughly. Blasted material moves forward and enters into the outlet tunnel. The spent abrasive from blasting operation after passing through the perforated floor plates will get collected into thecabinet's bottom storage hopper. From where it is transferred to the buck etelevator, which elevate the abrasive vertically and discharges the same into a media separation unit where dust and fine abrasives are cleaned ensuring that onlyclean abrasive will re-circulate to the blast wheel units for effective and better cleaning. A Dust collection system is provided with the machine whichwill continuously remove the dust and fine particles, thus keeping the inside of the machine and the nearby environment dust & pollution free.