A vinyl acrylic primer designed for priming masonry surfaces PROPERTIES Colour : Full range- as per shade card Finish : Smooth / Matt Solids(volume): 24 �±2% Specific gravity: 1.40 �± 0.05 Theoretical Coverage 7-8 m2/ltr @ 40 DFT DRYING TIME :AT 25 Touch dry: 2 hours To Recoat: 4 hours
NUTEX is a single pack co-polymer emulsion based; high build intermediate spray textured coating .contains quartz fine aggregates. PROPERTIES Colour : White Finish : Matt-medium textured Solids: 70% Specific gravity: 1.60 +/- 0.03 Theoretical Coverage 1 â??2 m2/ltr DRYING TIME â?? AT 25 �° To handle: 2 hours To Recoat: overnight Number of coats: 1
Tollens Matt Emulsion is highly washable water borne product based on special blend of acrylic emulsion, which is giving an excellent coverage, weather resistive, fast drying, low VOC, and while application it comes out smooth velvet finish. PROPERTIES Colour : Full range- as per shade card Finish: Matt Solids (volume) : 36% �± 2% Specific gravity: 1.45 �± 0.03 Theoretical Coverage 6.5-7.5m2/ltr @ 50uDFT DRYING TIME :â?? AT 25 �° To handle: �½ hour To Recoat: 2 hours Vehicle type: acrylic emulsion
MASONARY PRIMER It is specially formulated to give a very high level of adhesion and deep penetration into the concrete, which also offers a medium level of opacity. PROPERTIES Colour : Full range- as per shade card Finish: Matt Solids (volume) : 36% Specific gravity: 1.45 +/- 0.03 Theoretical Coverage 6-7 m2/ltr @ 40�¯� DFT DRYING TIME : AT 25 Touch Dry: 2 hours To Recoat: 4 hours Vehicle type: PVA copolymer
>=100 Gallons US$ 1.99 Payments:This supplier also supports L/C,T/T,Western Union payments.
Shipping: Support Sea freight Payments:This supplier also supports L/C payments. Quick Details CAS No.: Acrylic Emulsion EINECS No.: Acrylic Emulsion Main Raw Material: emlusion Application Method: Brush Brand Name: REGENT HIGH GLOSS EMULSION MF: Acrylic Emulsion Place of Origin: GBA-Alderney Usage: used for water-based ink and pverprint varnish production State: Emulsion Model Number: REGENT HIGH GLOSS EMULSION Packaging & Delivery Port Jebel Ali
WOOD PRIMER Specially formulated alkyd base wood primer for interior and exterior use. May be used under topcoats such as alkyds,oils,or latex paints. PROPERTIES Colour : White -pinkish Solids: 45% Theoretical Coverage 8 - 10 m2/lit DRYING TIME : AT 25 To handle: 2 hours To Recoat: 24 hours Vehicle type: Modified alkyd Specific gravity: 1.40 Flash point: 35C
>=100 Liters US$ 5.00 Payments:This supplier also supports L/C,T/T,Western Union payments.
>=100 Gallons US$ 3.50 Payments:This supplier also supports L/C,T/T,Western Union payments.
Polyurethane Coating is two component chemically cured product that forms a film that is resistant to chemicals, solvents and abrasion. PROPERTIES Colour : Full spectrum Solids: 50 +/- 2 % Theoretical Coverage 10 - 11 m2/lit DRYING TIME : AT 25 C To handle: 3 hours To Recoat: 5 hours Flash point: 27C Specific gravity: 1.10 �±0.05 Pot life: 6 hours Mixing ratio: 4 parts base "A" :1 part hardner "B" Solvent: Polyurethane thinner. High temperature will accelerate dry times and decrease pot life; lower temperature will lengthen cure times and slightly increase pot life.
A two pack high build epoxy Polyamide based under coat containing inert pigments. It is recommended as a final coat in an Epoxy system CHARACTERISTICS High build in single coat. Excellent resistance to fresh and salt water Abrasion resistance and flexible films. Excellent inter-coat adhesion. Resistant to solvents. Resistance to mild acids. USES Coating for long term protection for structural steel, concrete surface and internal lining of edible oil tanks, and fuel tanks. Suitable for marine installations, power plants, fertilizers, hospitals, laboratories, etc.
Paints & coatings Acrylic copolymer newtonian tp resin Aluminum paste Acrylic latex emulsions (water base) Aromatic hydrocarbon resins, 105 & 114 sp Styrenated acrylic emulsions (water base) Fumed silica (treated) Trimellitate plasticizer Ground cellulose fiber (thickener) Epoxy powder coating resin ( for rebar) Fine tone t resin 100% polyester resin Acrylic resin in butyl acetate Coconut oil alkyd in butyl acetate High solids short oil alkyd Phenolic modified short oil alkyd Polyester powder Water reducible epoxy ester High solids chlorinated alkyd Vinyl acrylic latex
Flame retardants Saytex bt -93 Para-t-butyl phenol end capped with tetrabromo bpa Fyrol pcf Tbbpa (tetrabromobisphenol a)
Interior exterior water based paints.
Commercial paint for interior or exterior use. Various shades of Blue, green, red, yellow, tan, off white, gray. 275 gallon totes. 14 totes per truckload, 3850 gallons US.
Paints
Dura flex sf Features: good weatherability low odor environmentally safe seamless monolithic membrane completely waterproof highly abrasive resistant resistant to oils, solvents, caustics & acids. high solids high spread rate may be subjected to rain, snow, or extreme cold without affecting itµs curing will withstand extreme environments bonds to itself, new-to-old, with proper surface preparation or priming. Recommended uses: flooring parking structures concrete waterproofing animal pins applies directly to rusty metal metal roofs universal primer for hydrostatic pressure radon mitigation sea walls secondary containment marine tank coating & repair manhole and sewer linings Us - gallon Us - five Us - drum Tote Us - gallon Us - five Us - drum Tote
Automatic copper coating 30 gallons per drum
Defender Defender is a coating that sheets rain water off coated glass surfaces. Defender also prevents snow, ice, bug splatter, tree sap, road tar and other items from sticking to a treated surface for easy removal. Each applicator covers 45 square of surface area, nearly twice as much as other coatings. Defender lasts a year, over twice as long as similar products on the market and nearly 100 times longer than some retail available products 15 pieces per box
Resist-a-flame Water soluble, non-toxic spray-on, brush-on, roll-on fire coating for all substrates - inhibits flame spread and smoke development with an astm e19 & e84 a-rating. Lab tested to 1800+ degrees. 25 & 50 lb bags of granular material to be mixed with hot water @ 4.5 lbs per gallon
