The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Sizes (mm): 8,10,12,14,16,18,20,22,25,28,30 Length : 3-12M or as your request Product Standards: JIS, ASTM,GB1499,2-2007,GB,EN XG1-2009,GB1499.1-GB1499.1,JIS G3112-87,BS4449-97
Product Name Seamless Carton Steel Pipe Grade Q235 = S235 / A53 Grade B / A500 Grade A / STK400 / SS400 / ST422 Q345 = S355JR / A500 Grade B Grade C Q355,45#ï¼?40# Length 5.8~12.0 m or as customized Surface Treatment Prime quality (bared, oiled, color paint, 3LPE, or other anti-corrosive treatment) Inspection With Chemical Composition and Mechanical Properties AnalysisDimensional and Visual Inspection, also with Nondestructive Inspection.
Product Name 50mm Gi Pipe Price/Carbon Steel Scrap Prices/Galvanized Iron Pipe Specification Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Wall Thickness 0.7MM~30MM Length Length:Single random length/Double random length 5m-14m,5.8m,6m,10m-12m,12m or as customerâ??s actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Grade Grade A, Grade B, Grade C Section Shape Square, Rectangular, Round, Technique steel pipe scrap Packing Bundle, or with all kinds of colors PVC or as your requirements Ends Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc. MOQ 1 Tons, more quantity price will be lower Surface Treatment 1. Galvanized 2. PVC,Black and color painting 3. Transparent oil,anti-rust oil 4. According to clients requirement Product Application: 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient
Tight Head or Open Head Steel Drums Available and can be customised to meet your requirements. * Tight Head drums have a triple seam construction (7 layers of steel) with a vertical seam electrically welded. * Superior vacuum resistance. * Open Head drums have completely removable lids and a triple seam safety factor with several locking band alternatives. * Many large steel drums can be reconditioned and reused several times before being recycled. * Fully customisable size 55+ gallons (208+ nominal litres), lined, various closures and fittings available. * Various colour and product decoration options are also available.
We can tailor drum sizes to meet your specific requirements and use case. * From 12 litre (3 gallon) up to 160 litres (42 gallon) capacity. * Tight Head, Open Head, Composite options available. * Thicknesses according to specification. * UN Solid and Liquid ratings available. * Plain or internally lacquered with epoxy, phenolic etc. * Stainless Steel Options also available.
Secondary used surplus steel, electrical steel, transformer lamination, crgo, silicon steel cold rolled and hot rolled, seamless steel tubes, steel pipes scrap, transformers scrap, copper scrap, aluminium scrap, aluminium cable, copper cable, bright bars, black bars, shafts, hollow shafts, stainless, brass, wire rope.International trade
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Cast iron skulls, cast iron borings and turnings, steels skulls, eaf skulls, plate iron, mill scale, metal scrap, incinerated scrap (e46).
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
Steel products e.g rebars, coils, h bars, drums and meeting customers requirements.
Steel scrap.
Steel drums, all sizes and bespoke drums made to order.
Antibacterial wet wipes, mobile chargers, mobile usb cable, paper cup, roasted coffee beans, espresso, steel coils, razor, belts, sesame seeds, face shield, tapioca starch, tapioca chips, aluminum ingots, zinc ingots, samsung usb chargers, iphone charger, silica sand, basil leaves, onion.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Outdoor furniture made with PE rattan, plastic wood, aluminum, and steel.
We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.
