British Aluminium Can Scrap Suppliers and Manufacturers

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Get the best deals on ALUMINIUM UBC (USED BEVERAGES CANS) SCRAP with West Metal Company. We provide premium quality scrap metal at competitive prices with

Item Value Place of Origin UK Brand Name Copper Wire Scrap Model Number CS11945 Type Copper Wire Copper Content 99% MOQ 100 Tons Appearance Red color Cu Content (%) 99.998% Purity High Purity

Commodity: Aluminum Used Brewered Cans Origin:Thailand Specification: Aluminum Content 98% Min Si% 0.3 max Fe% 0.7 max Cu% 0.25 max Mn% 1.0-1.5 Mg% 0.8-1.3 Cr% 0.1 max Zn% 0.25 max Ti % 0.1 max Bundles must be banded with a minimum of 16mm (width) x 0,80mm (thickness) Polyester straps. UBC suppliers are not allowed to use steel straps. The integrity of the bundles must be as safe as they can be stacked for storage, and bundle height must not exceed 1.50 meter. UBC briquette does not contain shredded material. Wooden pallets are not allowed to build the bundles. The briquette density is required to be in the range of 450kg/m3 to 700kg/m3 The preferred briquette size is: 0.40 x 0.30 x 0.30m and all briquettes should ideally be of uniform size. 24 bundles ( 1000 kg each)per container 40'HC Impurities:3% maximum as below: Moisture 0.7% Sand 0.6% Garbage 0.4% Paper & Vinyl 0.1% Ash 0.1% Magnetic Metals 0.5% Heavy Material 0.5% Dirt 0.1% Impurities 3.0% Non UBC target 3.0% If the impurities plus moisture is lower than 3%, there is no claim due to these non UBC. Radioactive source:None Fumigation Pallet a) Should be treated with Fumigation b) According to ISPM No.15(International standards for phytosanitary)

We are devoted to making sustainable improvement to offer superior quality products, satisfactory services uninterruptedly for the market and competitive price for the customer. We believe to make you satisfy, is our target forever. Under our efforts, we have already established good business relationship with some domestic and overseas. Our Goods remain free from Dust Particles, External Coatings, Oil or grease coatings and foreign contamination. We are capable to supply around 100 MT per week or as per buyers capacity. In very brief, our specialization and expertise lies in trading all kinds of ferrous and non ferrous scrap, specifically are as follows below: COPPER WIRE SCRAP 99.9 ALUMINUM EXTRUSION 6063 ALUMINUM UBC CAN SCRAP BOPP FILM (ROLL) SCRAP

Specification item value Grade 1000 Series Temper O-H112 Type Aluminum wafer Application Cookware Width Customer Requirement Surface Treatment Customized Alloy Or Not Is Alloy Place of Origin HEN Brand Name aluminum scrap Model Number aluminum scrap Tolerance �±1% Processing Service Welding, Cutting Delivery Time 22-30 days Product name Aluminum Flat Plate Aluminium Alloy Sheet Model Number 2024 Shape Square Keyword Aluminim Plate Material Aluminum Alloy Metal Color Customized Color Surface Polished MOQ 1 Ton Thickness 0.2-200mm Customized Standard ASTM AISI JIS DIN GB

Aluminum content 75 95 997 999 1Aluminum wire scrap 2Reasonable price and high purity 3Timely delivery and promptly shipping Density 2702gcm Melting point 66037C Boiling point 24670C Color silver white Aluminum scrap 6063 Aluminum profile scrap 6063 Aluminum scrap UBC The high recovery rate scrap aluminium wire with promotional price 1 Item Aluminium scrap 2 Easy control and operation 3 Fast melting 4 Discontinuous melting with scrap 5 High efficiency 6 Stable working structure

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

Surface Treatment Pickled Bright Polished Satin Technique EXTRUDED Cold Drawn Hardness 10HW-15HW Alloy Or Not Is Alloy Al (Min) Varies with the alloy grade Yield (â?¥ MPa) 310 Temper T3 - T8 Ultimate Strength (â?¥ MPa) 276 Tolerance �±1% Processing Service Bending, Decoiling, Welding, Punching, Cutting Standard ASTM AISI JIS DIN GB Surface Pickled Bright Polished Satin Anodizing Technique Extruded Material 1000-7000 series Product name Aluminium Alloy Rod Length as required

Canned tuna refers to tuna fish that has been processed, cooked, and preserved in a can or tin. It is a popular and convenient source of protein that can be easily stored and used in a variety of dishes.