SLUDGE OIL ,,, Dip and Pay as FOB as Ship To Ship only, from Benghazi, Libya, Only for RWA Buyers.. Origin: Libyan .. Price: $390 / MT .. Quantity per Vessel is from 10,000 - 30,000 MT / Vessel, is up to Vessel draft ... Procedures is very simple: ICPO ---> Seller send Commercial Invoice to Buyer to sign ---> Buyer makes Block Fund in Dubai against Commercial Invoice ---> Dip test and Injection of product ---> Payment ... Please contacting through RWA buyers only... Contact: USAMA
We supply Jet A1 Fuel on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery.
1. Density 0.95 to 1.03 kg/L at 15C 2. Viscosity Varies depending on the specific grade, but typically ranges from 50 to 300 centistokes (cSt) at 50C. 3. Sulfur Content High sulfur: up to 3.5% by weight Low sulfur: under 1% by weight (for areas with stricter environmental regulations) 4. Flash Point Minimum 60C (140F) 5. Pour Point Generally between 15C and 30C (59F to 86F) 6. Water Content Typically less than 1% by volume 7. Ash Content Maximum 0.1% by weight 8. Calorific Value Typically between 39 and 42 MJ/kg (megajoules per kilogram) 9. Carbon Residue Generally less than 15% by weight
Property Specification Density @ 15 C 775 - 840 kg/m Flash Point Minimum 38C Freezing Point Maximum -47C Viscosity @ -20C Maximum 8.0 mm/s (cSt) Smoke Point Minimum 25 mm Aromatics Content Maximum 25% by volume Sulfur Content Maximum 300 mg/kg Hydrogen Content Minimum 13.4% by mass Total Acidity Maximum 0.015 mg KOH/g Electrical Conductivity 50 - 600 pS/m (if required) Lubricity (BOCLE) Minimum 0.85 mm Thermal Stability (JFTOT) Minimum 260�°C (Filter Pressure Differential: Maximum 25 mm Hg) Water Content Maximum 70 mg/kg
We're a UK based company.. We presenting a Genuine SELLER / TITLE HOLDER who can supply Jet A1 Fuel, ULSD Diesel EN590, Unleaded Gasoline and Fuel Oil (CST 180/380) ..... ORIGIN: EUROPEAN .... Price: Platts minus 7% ... The Seller can supply as CIF, STS and Vessel Take Over. The Seller is The OWNER and the TITLE HOLDER ... SBLC MT760 is accepted as a guarantee only as NON-TRANSFERABLE, NON-OPERATIVE and is issued to the SELLER .. We're looking for RWA buyers... MOQ is 50,000 MT for EN590, FUEL OIL, and Gasoline, and 2M bbl for Jet A1 Fuel .... Contact: Usama
En590, jeta1 and d6.
* Quantity : MIN 50,000MT x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyers bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Sellers fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity MIN 50,000MT x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
* Quantity MIN 50,000MT x 12 months * Origin: Russian Federation Specifications: Standard Export Quality. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. Commissions * Payment is then made by Seller, who carries out all commissions transfers. * Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF DLC or SBLC PROCEDURE 1. Buyer issues ICPO, company registration, I.D. and Top World Bank redacted Bank Statement or equivalent 2. Seller issues Sales and Purchase Agreement (SPA). 3. Buyer signs and returns SPA. 4. Buyer's Bank issues a RWA letter to guarantee to issue an instrument on behalf of the Buyer within three working days after receiving the following PPOP. 5. Seller issues PPOP to Buyer including the following: A. Copy of license to export issued by the Department of the Ministry of Energy. 8 B. Copy of approval to export issued by the Department of Ministry of Justice. C. Copy of statement of availability of the product. D. Copy of the refinery commitment to produce the product. E. Copy of contract to transport the product to port F. Copy of the port storage agreement G. Copy of the charter party agreements to transport the product to the discharge port. H. Tank Storage Receipt (TSR) I. Q & Q by Current SGS report. 6. Buyer's bank issues operative Letter of Credit DLC MT 700 or SBLC MT-760 to Seller's fiduciary Bank account. 7. Seller issues 2% Performance Bond to Buyers bank. 8. Shipment Commences 9. On getting to Buyer's port of discharge, the Buyer's inspection team board the vessel and perform an inspection. Buyer sends SGS report to Seller. 10. Seller provides shipping document and a master commercial invoice to Buyer, within 3 banking days, Buyer makes the payment in full via MT 103/TT to Seller's Bank account.
Procurement Process - Cost, Insurance And Freight - CIF Refined/produced In Germany, Not Re-documented Please Find Attached Our Cif Procedures. Any Questions Please Don't Hesitate To Ask.
Products - German Origin - Product List With Pricing Details Refined/produced In Germany, Not Re-Documented Category A (AVIATION KEROSENE) 1.Jet Fuel A-1 2.Jet Fuel TS-1 Category B (D2/EN590) 1.Diesel 10 PPM (Gasoil 0.001%S) 2.Diesel 50 PPM (Gasoil 0.005%S) 3.Diesel 500 PPM (Gasoil 0.05%S) 4.Diesel 1000 PPM (Gasoil 0.1%S) 5.Diesel 2500 PPM (Gasoil 0.25%S) Category C (PETROL) 1.Unleaded Gasoline RON 92 2.Unleaded Gasoline RON 95 3.Unleaded Gasoline RON 97 Category D (D6 RESIDUAL FUEL) 1.Fuel Oil 3.5% 180 CST 2.Fuel Oil 3.5% 380 CST
Petroleum Product EN 590 10 PPM A1 Jet Fuel Crude Oil
Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 2.000.000 BARRELS The price and discount: - FOB ROTTERDAM: DISCOUNT $4 PER BARREL FROM NWE PLATTS CODE LINE â??PJAAV00â?? Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
JET A1 FUEL Maximum Quantity: 2,000,000 Barrels per Month CIF Price: Gross USD $88.00BBL NET/ USD $86.00 NET on CIF FOB Price: Gross USD $ 86.00BBL NET / USD $84.00 NET on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
GASOLINE OCTANES Minimum Quantity: 5000 metric tons CIF price: GROSS USD $400.00 MT NET: USD $410.00 MT TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Minimum Quantity: 400,000,000 Gallons per Month Maximum Quantity: 800,000,000 Gallons per Month CIF Price: Gross USD $ 0.86 / USD $ 0.84 NET on CIF FOB Price: Gross USD $ 0.84 / USD $0.82 NET on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Maximum Quantity: 2,000,000 Barrels per Month CIF Price: Gross USD $88.00BBL NET/ USD $86.00 NET on CIF FOB Price: Gross USD $ 86.00BBL NET / USD $84.00 NET on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Mazut M100 GOST -10585/75/99 Minimum Quantity: 5000 Metric Tons per Month Maximum Quantity: 50,000 Metric Tons per Month CIF Price: Gross USD $250.00/ USD $240.00 NET on CIF FOB Price: Gross USD $240.00 / USD $230.00 NET on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Reliable supply of Jet A1 available direct from refinery ex Rotterdam and Houston. Competitive pricing . TTT , TTV and CIF procedures available . Please note no changes can be made to the procedures
Petroleum products..
