Product Description Condenser is commonly used for the opening flow. Use blower and card pipe transmitting raw cotton or chemical fiber and the original cotton is condensed at the surface of dust cage with the suction of the blower and then stripped from it by beater, and go through the trash extraction of dust cage. Rich specifications for selection. Different power for different position in the flow. There are bypass devices at the top of this condenser and the raw cotton can be straightly transmitted to the next platform through this path. Technical Specifications Production kg/h: 800 Dust cage diameter mm: 500 Beater type: 6-Wing Blower diameter mm: 500 Blowing rate: Around 4500 General Power Kw: 4 Size (LxWxH) mm: 1721x800x1000 Machine weight kg: 600
Product Description The separator is used for cotton cleaning process and is directly installed in a conveying duct, which can detect and remove effectively the metal impurities and spark in textile fiber. It is an importance equipment for ensuring safety in production. Technical Specifications Power Source: AC220V 50HZ,60HZ Sensitivity: Spark-1mm,visual angle no less than 90 metal-no less than 2mm steel ball Response time: Millisecond level Cotton speed range in conveying duct: 5-18m/sec Dia. Of conveying duct: 300 mm
Product Description Chute feeder has a good effect on open & low fiber damages. Two feed rollers feed materials to prevent from warping. The feed rollers controlled by inverter. It is mounted with protection unit. The space between feed rollers and feed rollers/open roller is adjustable. The vibrant favourable for forming even and uniformity fiber batt. The output roller draft for improving sliver evenness. The sliver evenness is improved. Technical Specifications Suitable fiber: All synthetic and mixed fibers which are less than 76mm Working width (mm): 950 Production (kg/h): 100 Diameter of feed roller (mm): 120 Diameter of opening roller (mm): 266 Blower speed (rpm): 2840 Air displacement: 600m3/h -500pa Installed power (Kw): 2.85 Overall dimension (Wx Lx H) (mm): 1614 x 600 x 2800 Net weight (kg): 1400â??
Line composition: - Ingredient mixer HOSOKAWA SINGLE COOLMIX 200E - Lungs HOSOKAWA TBT 100 - Cooking zone HOSOKAWA SINGLE ROTORCOOKER SUPER - Essence deposit HOSOKAWA DOSSING UNIT - Head HOSOKAWA 6B1290 - 2 Candy wrapping machines THEEGARTEN PACTEC-2004 and 2007 Description: Casting machine according to the "endless chain" principle. Single belt installation with continuous transport chain. The molds are vertically guided, placed freely on supports in horizontal transport. Filling of molds or cavities with dough, made with 1 pour per mold in mono products and 2 pours per mold in One-Shot products
Pro Supreme Trolley Suitable for All Types of Fully Automatic WM upto 7kg Min Size-17 17 / Max Size -24 24 Semi-Automatic WM Min Size -16-27 / Max Size -21-33 Suitable for all types of Semi-Automatic WM upto 7kg
INJECTION UNIT Injection capacity - 160 Max. injection speed (mm/s) - 126 Max. screw speed (r/mm) - 263 CLAMPING UNIT Clamping force (KN) - 700 Opening stroke (mm) - 320 Space between tie bars (mm x mm) - 360 x 360 Min. mould height (T-slot) (mm) - 140 (105) Max. mould height (T-slot) (mm) - 340 (305) Max. distance Platen (T-slot) (mm) - 660 (625) Ejector stroke (mm) - 70 Ejector force forward (kN) - 31 Ejector force backard (kN) - 20 Number of ejector rods (PC) - 5 POWER ELECTRIC Sys. Pressure (MPa) - 16 Pump Motor (kW) - 9 Heater power (kW) - 5.4 Number of temp. Control zones - 3+1 OTHER Hopper capacity (kg) - 25 Oil tank capacity (L) - 120 Macine dimensioni (LxWxH) (m x m x m) - 3.5 x 1.15 x 1.7 Machine weight (Ton) - 2.4
I have Used Concrete Pumb in UAE and India Good Working condition 36 mtr 42 mtr 47 mtr 51 mtr
we are one of the businesses that specialists in the tanks and pressure vessels fabrication Tanks & Pressure Vessels Fabrication Pressure Vessels Fabrication Manufacturing in , Tanks & Pressure Vessels Fabrication in , Tanks & Pressure Vessels Fabrication
Application: Suitable for Contact Sealing Size: Can be Customized Temperature, Speed & Sealing Time Can be Adjusted Packing: 1 Pc/Box
Application: Used on Conveyor Based Filling Lines Size: Can be Customized Temperature, Speed & Sealing Time Can be Adjusted Packing: 1 Pc/Box
Application: Applying Induction Seals on to Bottles -Manually Size: To seal 20mm 110 mm Induction seals Temperature & Sealing Time Can be Adjusted Packing: 1 Pc/Box
Application: For Wadding Inserting Induction/ EPE Liners in to Caps Specifications: Diameter & speed can be adjusted. Can be synchronized with hot glue applicator Packing: 1 Pc/Box
Tex Mach International is a leading supplier of new, refurbished and used heavy machinery for infrastructure construction, mineral extraction projects, quarry, mining and machinery related to the pipeline industry. We have a global customer base and these relationships have been built on providing advice, a quality product, a fast response and the reassurance of local support. We strive to be your supplier of choice. From single machine to complete fleet of vehicles, we are expert in supplying reliable affordable machinery. If the machinery you need is not in stock, we can source, service, inspect, test and if necessary, refurbish quality used machinery.
TMI 90.1.1.200407 - Round Bottle Labelling Machine Fully Auto Round Bottle Labelling Machine For the pharmaceutical, food, cosmetic and other industries round bottle labelling, can be affixed to the week and semicircular labelling. Application: For label: self-adhesive labels, self-adhesive film, electronic supervision code, bar code, etc. Application: require circumferential surface of the membrane attached label or product. Industry: Widely used in food, medicine, cosmetics, cosmetic, electronic, metal, plastics and other industries. Application: PET round bottle labelling, labelling plastic bottles, canned food and so on. Working Process: * Core works: the product of bottle body separated, the sensor detects the product passes the signal returned to the labelling control system,the control system in place to control the motor sends label affixed to the product subject to labelling and position, product flow the standard unit cover,covered with standard rotation driven products, the label is roll coating, a label attached to the action is completed. * Procedure: put the product (which can be accessed line) -> product transfer (device automatically) -> Products minutes away-> Product Testing -> Labelling -> cover marked -> collect the labelling products. Product Specification/Models The following technical parameters for the standard model, other special requirements and functions can be tailored Suitable label length (mm): 20mm ~ 314mm Applicable Label width (backing paper width / mm): 15mm ~ 120mm Applicable Products diameter (for round bottle) and height: diameter: 25mm~ 100mm , Height: 25mm ~ 230mm Applicable standard roll outside diameter (mm): 280mm \ Applicable standard roll inside diameter (mm): 76mm Labelling accuracy (mm): ± 1mm The standard speed (m / min): Stepping: 5 ~ 25m/min, Labelling speed (Pcs / min): Stepping: 30 ~ 80 Pcs / min (with the bottle and label size) , Conveyor speed (m / min): 5 ~ 25m/min Weight (kg): about 185kg Frequency (HZ): 50HZ Voltage (V): 220V Power (W): 530W Device dimensions (mm) (L W H): 1800mm 800mm 1500mm
Product Description Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine. Technical Specifications Capacity: 800 Kg/h Number of trunks: 4-6 Air volume of conveying fan: 1.1 m3/s Power: 10.85 Kw Dimensions: 250 mm x 1600 mm x 4400 mm Net weight: 4800 Kg
Product Description Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process. Technical Specifications Beater Width: 1720 mm (Special) & 2300 mm (Normal) Production Kg/h: 1000 Kg/h & 1500 Kg/h Basic Pile Weight: 6000 Kg & 7500 kg Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time Calender Roller Dia.130 mm Both Sides; Middle 116 mm Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min Installed Power: 8.6 Kw & 10.6 Kw Overall size: 22030*5212*3082 & 22030*6648*3082 Net weight: 6000 Kg & 6500 Kg
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to
TMI 45.49.1.200430 - SPRING TYRE EARTHQUAKE ACCESSORY MACHINE Product Details Use: Food, industrial cleaning fluid recovery from water, oil removing machine. Short introduction: TMI 45.49.1.200430a spring tyre earthquake Standard type 20kg load Weight about 170kg TMI 45.49.1.200430a spring tyre earthquake High barrel 20kg load Weight about 180kg
TMI 45.51.3.200430 - SPRING TYRE EARTHQUAKE ACCESSORY MACHINE Product Details Use: Industrial washing, hotel cleaning special fast clothes dewatering machine Short introduction: TMI 45.51.3.200430a spring tyre earthquake Standard type 20kg load Weight about 170kg TMI 45.51.3.200430b spring tyre earthquake High barrel 20kg load Weight about 180kg TMI 45.51.3.200430c spring tyre earthquake Heavy load 40kg load Weight about 210kg Outer diameter 600mm Barrel diameter 530mm
TMI 45.52.4.200430 - Safety Cover With Bearings Accessory Machine Product Details Use: Industrial washing, hotel cleaning special fast clothes dewatering mac Short introduction: TMI 52.4.200430a Four bearing stainless steel safety cover 90GB copper motor TMI 52.4.200430b Four bearing plastic safety cap 90GB copper motor TMI 52.4.200430c Two-bearing stainless steel safety cover 90GB copper motor TMI 52.4.200430d Two-bearing plastic safety cap 90GB copper motor
