Product Description
Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process.
Technical Specifications
Beater Width: 1720 mm (Special) & 2300 mm (Normal)
Production Kg/h: 1000 Kg/h & 1500 Kg/h
Basic Pile Weight: 6000 Kg & 7500 kg
Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n
Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n
Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time
Calender Roller Dia.130 mm Both Sides; Middle 116 mm
Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min
Installed Power: 8.6 Kw & 10.6 Kw
Overall size: 22030*5212*3082 & 22030*6648*3082
Net weight: 6000 Kg & 6500 Kg
Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
Product Description Mixing opener is suitable for all classes of raw cotton (usually for those with high maturity and higher class). These are placed in the front of the automatic plucker, and transmitted them to a small block brought by the automatic plucker raw cotton into the machine with the aid of Condenser add on (additional item), open and remove some impurities and dusts, then suck the raw cotton into the platform with its condenser. Technical Specifications Production Kg/h: 800 Kg/h Width in mm: 1060 Trash extraction efficiency: Trash extraction 3.5/hour, usually about 30-35% Spiked apron speed: 1, 1.25, 1.5, 1.75 m/min Bales speed: 60x 70x 80 100 m/min Press apron speed: 1x 1.25x 1.5x1.75 m/min Evening roller diameter/rotating speed: 260mm\200r/min Spike beater diameter/rotating speed: 400mm\400r/min Knife beater diameter/rotating speed: 400mm\430r/min Small hedgehog beater (1) diameter/rotating speed: 400mm\700;800;900r/min Small hedgehog beater (2) diameter/rotating speed: 400mm\745;850;960r/min Grid bars type/interval space: Flat steel grid bar spike knife double beater 12-22Small hedgehog beater (1) First group 12-22mm Second group 10-22mm Small hedgehog beater (2) 10-22mm Spike, knife beater and grid bar: Entrance10-15mm Exit12-20mm Hedgehog beater (1) and grid bar interval space: Entrance10-14mm Exit13-17mm Hedgehog beater (2) and grid bar interval space: Entrance10-15mm Exit15-20mm Press apron and spiked apron interval space: 60-80mm Spiked apron and evening roller interval space: 40-80mm Spiked apron and spike beater interval space: 5mm Motor specification: Rotating beater 6-4kw (left) 1430r/min Rotating spiked apron 2-21-6 0.6kw 930r/min Rotating Spiked apron 0-100 0.37kw 14r/min Size (LxWxH) mm: 5358x1430x3696 including Condenser Machine weight: 4200 Kg
Patent products ! Horizontal Hydraulic rubber cutting machine Working principle: By the rotating blade of it, this machine cuts off the rubber bale with reciprocating motion of the worktable. The worktable is controlled by hydraulic system, with which hydraulic oil is used as the working medium. The self-lubrication of relative moving parts result in less friction and longer service life. Function: It is a rotating-disc type of cutting machine in new design for natural rubber, compound rubber, reclaimed rubber and synthetic rubber. It is used in cutting rubber blocks into smaller blocks, slices, granules and bars, and cutting other types of material as well.
Multi-functional reclaimed rubber cutting machine\Patent products ! Horizontal Hydraulic rubber cutting machine Working principle: By the rotating blade of it, this machine cuts off the rubber bale with reciprocating motion of the worktable. The worktable is controlled by hydraulic system, with which hydraulic oil is used as the working medium. The self-lubrication of relative moving parts result in less friction and longer service life. Function: It is a rotating-disc type of cutting machine in new design for natural rubber, compound rubber, reclaimed rubber and synthetic rubber. It is used in cutting rubber blocks into smaller blocks, slices, granules and bars, and cutting other types of material as well.
Rubber cutting machine sri lanka Working principle: By the rotating blade of it, this machine cuts off the rubber bale with reciprocating motion of the worktable. The worktable is controlled by hydraulic system, with which hydraulic oil is used as the working medium. The self-lubrication of relative moving parts result in less friction and longer service life. Function: It is a rotating-disc type of cutting machine in new design for natural rubber, compound rubber, reclaimed rubber and synthetic rubber. It is used in cutting rubber blocks into smaller blocks, slices, granules and bars, and cutting other types of material as well.
Patent products ! horizontal hydraulic rubber cutting machine Working principle: By the rotating blade of it, this machine cuts off the rubber bale with reciprocating motion of the worktable. The worktable is controlled by hydraulic system, with which hydraulic oil is used as the working medium. The self-lubrication of relative moving parts result in less friction and longer service life. Function: It is a rotating-disc type of cutting machine in new design for natural rubber, compound rubber, reclaimed rubber and synthetic rubber. It is used in cutting rubber blocks into smaller blocks, slices, granules and bars, and cutting other types of material as well. -
Specification: Engine ModelWQJ-1000WQJ-1300 Dia.of cutter(mm)10001300 Rotating speed of cuter(r/min)40.540.5 Cycloid reducerBWD3-35-4KWBWD3-35-4KW Power(kw)2.22.2 Capacity(t)23 N.W(T)11.2 Packing of Dimension(mm)1840x1130x14002200x1130x1650 Working principle: By the rotating blade of it, this machine cuts off the rubber bale with reciprocating motion of the worktable. The worktable is controled by hydraulic system, with which hydraulic oil is used a - s the working medium. The self-lubrication of relative moving parts result in less friction and longer service life. Function: It is a rotating-disc type of cutting machine in new design for natural rubber, compound rubber, reclaimed rubber and synthetic rubber. It is used in cutting rubber blocks into smaller blocks, slices, granules and bars, and cutting other types of material as well.
Specification: Engine ModelWQJ-1000WQJ-1300 Dia.of cutter(mm)10001300 Rotating speed of cuter(r/min)40.540.5 Cycloid reducerBWD3-35-4KWBWD3-35-4KW Power(kw)2.22.2 Capacity(t)23 N.W(T)11.2 Packing of Dimension(mm)1840x1130x14002200x1130x1650 Working principle: By the rotating blade of it, this machine cuts off the rubber bale with reciprocating motion of the worktable. The worktable is controled by hydraulic system, with which hydraulic oil is used as the working medium. The self-lubrication of relative moving parts result in less friction and longer service life. Function: - It is a rotating-disc type of cutting machine in new design for natural rubber, compound rubber, reclaimed rubber and synthetic rubber. It is used in cutting rubber blocks into smaller blocks, slices, granules and bars, and cutting other types of material as well.
Specification: Engine ModelWQJ-1000WQJ-1300 Dia.of cutter(mm)10001300 Rotating speed of cuter(r/min)40.540.5 Cycloid reducerBWD3-35-4KWBWD3-35-4KW Power(kw)2.22.2 Capacity(t)23 N.W(T)11.2 Packing of Dimension(mm)1840x1130x14002200x1130x1650 - Working principle: By the rotating blade of it, this machine cuts off the rubber bale with reciprocating motion of the worktable. The worktable is controled by hydraulic system, with which hydraulic oil is used as the working medium. The self-lubrication of relative moving parts result in less friction and longer service life. Function: It is a rotating-disc type of cutting machine in new design for natural rubber, compound rubber, reclaimed rubber and synthetic rubber. It is used in cutting rubber blocks into smaller blocks, slices, granules and bars, and cutting other types of material as well.