Crushed stone from blast-furnace and steelmaking slag for general construction works, fractions: over (from) 3 to 10 mm incl., from 10 to 20 mm incl., from 20-40 mm incl., from 40 to 70 mm incl., from 70 to 300 mm, DKPP code 08.12.13 (State Classifier of Goods and Services)
PHYSICAL AND MECHANICAL DATA  The commercial name is Silver Gray  The Labradorite breed  Kovalyvske deposit  Bulk weight 2720-2740 kg / m3  Water absorption 0.02-0.08%  Compressive strength 180-220 MPa Wear 0.6-0.7 g / cm2 Natural radiation class 1 Class  * Any type of construction is allowed
PHYSICAL AND MECHANICAL DATA The commercial name is Irina Blue The Labradorite breed  Osnikovske deposit  Bulk weight 2790-2900 kg / m3  Water absorption 0,03-0,11% Compression strength 131-174 MPa Wear 0.69-0.74 g / cm2 Natural radiation class 1 Class * Any type of construction is allowed
PHYSICAL AND MECHANICAL DATA The commercial name is Volga Blue Extra The Labradorite breed Gorbulivske deposit Bulk weight 2730-2930 kg / m3 Water absorption 0,12-0,56% Natural radiation class 1 Class * Any type of construction is allowed
Comparative physical and chemical parameters of the material: 1.Carbon mass fraction, % min. 98 2.Ash mass fraction, % max. 1 3.Sulfur mass fraction, % max. 0.05 4.Moisture content, % max. 1 5.Fraction, %, mm 0.2 - 4 Packing : 25 kg paper bags, 500 kg and 1000 kg big bags;
When operated in a well, boring graphite: Creates a positive pressure to interstitial pressure; - transfers hydraulic power to the bottom hole motor and chisel; - provides a high quality producing formation exposing; - ensures lubricating and corrosion-inhibiting effect on drilling tools; - cools and lubricates a chisel; - prevents drilling troubles (sticking of drilling tools and intermediate casing, circulation loss, oil and gas shows, etc.); - reduces friction factor; - ensures environment protection; 1.Bulk density, kg/m3550 - 750 2.Moisture content, % max2 3.Ash mass fraction, % max25 4.Mesh residue 02, % max5
No.Characteristicsfigures 1.Bulk density, kg/m3550 - 750 2.Moisture content, % max2 3.Ash mass fraction, % max25 4.Mesh residue 02, % max5 When operated in a well, boring graphite: Creates a positive pressure to interstitial pressure; - transfers hydraulic power to the bottom hole motor and chisel; - provides a high quality producing formation exposing; - ensures lubricating and corrosion-inhibiting effect on drilling tools; - cools and lubricates a chisel; - prevents drilling troubles (sticking of drilling tools and intermediate casing, circulation loss, oil and gas shows, etc.); - reduces friction factor; - ensures environment protection.
Various, Rheological control, Flow agent, Anti-caking agent, Anti- blocking agent, Anti-settling agent, Spray aid, Thickening agent, Carrier, Viscosity control agent, Glossing or matting agent, Chemical intermediate, Stabilization agent, Filler, Reinforcing agent in: Coatings, Adhesives and/or sealants, Silicone elastomer, Rubber products, Suspension, Dispersion, Batteries, Cosmetics, Inks and toners, Paints, Hygiene and sanitary products.
Sugar, cane, wheat flour, cereals like corn, wheat, sunflower, rapeseed, soybean, butter, fuel and fuel oil, metallic calcium, aluminum, copper, ferroalloys.
Quartz stone in slabs.
Fly ash is used: In the production of lightweight concrete. Low-cement concrete is used in the preparation of road bases. Fly ash is also used in slag-silicate concretes, which are used to repair roads, airfields, bridges, as well as in the construction of acid-resistant floors in chemical plants, livestock farms, and metallurgical facilities. In the production of foam concrete, its introduction into the foam concrete mixture increases the aggregate stability of the mixture between the beginning and end of the cement dough setting, which prevents the movement of components and prevents negative effects on the formation of the structure. Fly ash easily replaces cement in the production of mortars, ready-mixed concrete, and finished products. It is used as an additive to cement without reducing its activity, is used in the preparation of concrete for road construction, and as an additive to clay in the manufacture of tiles and bricks. As a component of dry construction mixes: production of dry masonry mixes consisting of cement, sand, fly ash, ICP, and powdered superplasticizer.
As a dense and hard material, dolomite is widely in demand in construction - in finishing works and for the construction of low-rise buildings. Also, the mineral is an important element of the refractory treatment of blast furnaces for steel processing and is used as a flux for melting iron materials. In addition to the above, dolomite: used as raw material for ceramics, glass, cement, fertilizers; used in the production of pesticides, paints; is the basis for creating decorative and building stones; acts as a filler in the production of asphalt, concrete blocks, etc. A large amount of powdered dolomite (dolomite flour) is actively used in the creation of float glass. Limestone material is also added to the soil to reduce acidity and "sweeten" the land. This special material plays an important role in a variety of components used to manufacture residential and commercial construction products: plasters (including waterproof); mastics; roofing systems; construction connections; marble and polymers; concrete blocks; floor coverings - composite vinyl tiles, etc.
Kaolin, Zircon Sand/Silicate, Rutile, Ilmenite, Kyanite, Airon Oxide.
Urea 46%, aluminium ingots (al 87, al91, ak5m2), salt, chrome concentrate.
Kaolin clay.
Kaolin, clay.
Timber, coal, iron ore.Transport, forwarding services
Iron ore, ferrous metals, non-ferrous metals, ferroalloys, metal scrap, pig iron.Clearing, and shipping
Fly ash, slag.
Kaolin clay, kaolin raw, quartz sand.
