Elderberries are used in the food industry for the production of pies, jellies, jams, ice cream, yogurt and alcoholic beverages. In folk medicine, it has been used for centuries as a medicinal plant because anthocyanins are known phytochemicals that are good for human health.
The elderberry harvesting season usually lasts from mid-August to mid-September, depending on the region and variety. The harvesting climate in the south of Ukraine preserves all the useful properties of elderberries
The berries are dried at 140 degrees Fahrenheit (60 degrees Celsius). Next, the berries are triple-cleaned.
- Wild plants.
- Humidity (10% -12%).
- The maximum amount of green to 0.1%.
- Purification method: color-sorting machine
- Packaging (weight 25 kg)
- Production capacity - from 50 tons
The berries are balls up to 2 cm in diameter and are a bright purple-blue color when ripe, but dried juniper berries are much darker, almost black with a violet cast. They taste slightly bitter and have a slight turpentine flavor. But most of all they are valued for their resinous pine aroma, for which the berries are considered a spicy spice.
From rowan berries are prepared healing infusions, drinks, teas, jams, jellies, juices. The rowan berries grow wild in ecologically clean regions of Ukraine. They are harvested in the forests, on the hills. The rowan berries turn red as early as August, but they are usually picked in October after the first frosts. Raw material is delivered to our company, where it is dried in a thermostatically controlled room. After that, the fruits are cleaned of peduncles and twigs, leaves, and unripe berries.
- Wild plants
- Natural drying
- Humidity (9%-11%)
- Maximum amount of green up to 0,1%.
- Cleaning method: color-sorting machine
- Packaging (weight 25 kg)
Grain and cereals like soft wheat, corn, sunflower, rapeseed, soybean, and other agricultural crops, grain milling products, sunflower oil, beet sugar, wood pellets, standard: en plus a1, a2, nestro brick fuel, nitrile, latex, and vinyl gloves, medical syringes, protective masks ffp2, ffp3, other face masks, and other medical equipment.
Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model - 3418+
¦a) thickness*width of the sheet ,mm 6,3*3150
¦a) stripe length as to the back gauge, mm 700
Gap adjustment, type automatic
back gauge drive, type motorized
Stroke frequency, p/min 60
Main drive,KWt 11,8
Dimensions, mm 4000)1900)1700
Weight, kg 6200
Guillotine shears model -- 3316++
Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3316++
¦a) thickness*width of the sheet,mm 4,0*2500
¦a) stripe length as to the back gauge, mm 630
Gap adjustment, type manual
back gauge drive, type manual
Stroke frequency, p/min 65
Main drive,KWt 8,5
Dimensions, mm 3300)1630)1520
Weight, kg 3870
Guillotine shears model -- 3314+
Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/
The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3314+
¦a) thickness*width of the sheet,mm 2,5*1600
¦a) stripe length as to the back gauge, mm 630
Gap adjustment, type Manual/screw
back gauge drive, type manual
Stroke frequency, p/min 65
Main drive,KWt 3,2
Dimensions, mm 2300)1570)1470
Weight, kg 2000
Guillotine shears model -- 3416
Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm.
It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack.
The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge.
Specification
Model -- 3416
¦a) thickness*width of the sheet, mm 4,0*2000
¦a) stripe length as to the back gauge, mm 700
Gap adjustment, type automatic
back gauge drive, type motorized
Stroke frequency, p/min 60
Main drive,KWt 5,6
Dimensions, mm 2610)1600)1510
Weight, kg 2870
Guillotine shears model --478
Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-.
Specification
Maximum thickness, mm 16
Maximum width, mm 2200
Mains current 3 phases, AC
Frequency, Hz 50
Operating voltage, V 380
Stroke frequency 20
Engine power, KWt 30
Dimensions, mm 3150/2275/2350
Weight, kg 9800
Guillotine shears models --+ 3214
Model --+ 3214
¦a) thickness*width, mm 2,5*2500
Stroke frequency, p/min 33
Main drive,KWt 3
Dimensions, mm 3120)2000)1330
Weight, kg 1800
Crank metal sheet guillotine shears model --+ 6020
H6 * L2500mm
Designed for the sheet cutting with the thickness up to 6 mm.
Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/
Specification
Max cutting thickness, mm 6
Max cutting width, mm 2500
Stroke frequency, min-1 50
Power, KWt 8,5
Dimensions, mm 3400)1400)1450
Weight, kg 3650
