Fiber optic patchcord cables are used in GSM base stations, Fiber Optic interconnections, patch panels, distribution point connections and ODF connections with its structure suitable for indoor use. The following types of fiber optic cable patchcord cables are mostly used in base stations. LC LC MM 50/125 DX patchcord fiber optic cable LC LC SM 9/125 DX patchcord fiber optic cable SC LC MM 50/125 DX patchcord fiber optic cable SC LC SM 9/125 DX patchcord fiber optic cable Fiber optic breakout cables are prepared in different quantities according to the needs in the field.
Breakout optical cable, suitable for outdoor use, is used for RRU assembly in 3G and LTE (4G) base stations. Fiber optic is a system that works on the principle of transmitting light through a pure glass thread as thick as a human hair and produced very precisely. The main reason for choosing cables produced in this way is that environmental conditions are severe; It is not affected by humid, damp places where electrical field interference is intense and always provides a stable connection. Fiber optic cables transmit at the speed of light, that is, 300 thousand km per second. Because of these aspects, they are designed for data transfer over long distances. LC LC MM 50/125 DX type breakout fiber optic cable is mostly used in base stations. Fiber optic breakout cables are prepared in different quantities according to the needs in the field.
Makomak manufactures a wide range of Spring Driven Cable Reels for industries demands; e.g. grabs, magnets, lifting materials, transfer carts, working platforms, window cleaning systems, portal cranes, waste cleaning system, for vertical and horizontal applications. All the materials used in the systems designed after market needs with the latest design programmes. The wearing parts used in the reels are choosen for long-life working, hot dip galvanized side plates and epoxy coating for body prefered in standart apllications. Stainles steel can be used if it is needed. The cable reels can be used for applications inside and outside. The housing of the slipring body is protected with the materials carefully choosen. Standard configurations are always in stock and ready for transport in a week. Special design cable reels can be produced accoring to customer needs and working conditions.
Reinforced mesh is a kind of general purpose metal constructions used for reinforcement of construction projects, protection against mechanical damage and to ensure long-term and trouble-free building operation. ... Reinforcing mesh is made of class AI and AIII rebars and low-carbon indented steel wire.can be made in any size you want.
Areas of Usage Infrastructure applications in inner-city or out of city Protection of fiber optic, telecommunication, cable-tv and energy transmission cables.
These cables are intended for CATV and where low attenuation and high frequency transmittance are desired. They are used as main line cable in CCTV systems.
Produce from 0,8mm, 1mm, thickness galvanize steel profile. Resistant against expolsive materials and strike. Through its micro perforations can be preferred in places which showcase is important. It can be painted to all Ral Colours through catalogue. The price shows dollar/running meter
Electric Heater For Rooms
Automatic sliding door wick sensors.
Alternator Charge Current 120 A Rated Voltage 28 V Limited qty. Made in Germany
Metarial Stainless Steel Lenght (h) 48,5 cm. Diameter (�?) 8,5 cm. Weight 2,50 kg. Working Temparature -25�°C / 90�°C Type of Terminal Electroatmospheric Stnadart NFC 17-102/2011 Max. Current Withstand 200 kA Advance Time �?t 81 �¼s
Ability to detect every angle through 360 degree motion sensor technology Smooth lighting through sanded glass Perfect detection thanks to digital technology Installation height: 2, 8m Time adjustment: 10sec-5min Lux adjustment: 2-2000 lux Operating temperature: -20 °c - + 40 °c Protection class li
Switch type motion sensor 360 degree sensing angle on the ceiling, 180 degree sensing angle on the wall. Available to use on ceiling and on wall. Auto , on , off mode selection by tri-state switch max 9m Detection height : 2, 8 m/1.5m Time adjustment : 10 sec.-5 min. Lux adjustment : 2-2000 lux Operating temperature:-20°c~+40°c Protection class: ip 20 / class ii Warranty : 3 years
From 25KVA to 5000KVA power and from 6,3 KV to 36 KV voltage features, Trans-el produces Oil type, hermetic transformers or transformers with an oil expansion tank, Indoor and outdoor power and distribution Transformers.
From 25KVA to 5000KVA power and from 6,3 KV to 36 KV voltage features, Trans-el produces Oil type, hermetic transformers or transformers with an oil expansion tank, Indoor and outdoor power and distribution Transformers
Gas ignition transformers from 2 outlets to 6 outlets. For gas cookers, gas ovens. Potted with epoxy resin.
Neon Lamp Transformers from 6KV up to 12KV. Potted under vacuum with epoxy resin. Protections: Output open circuit, overload, output short circuit, earth-leakage, input over voltage.
Reactors are designed, manufactured and supplied in accordance with GOST R 52630 : 2006, OST 26.291â??94 and/or EN 13445 4:2002, ASME Section VIII Div.1&2. Criteria for selection of materials for manufacturing of reactor shells and piping are based on rich practical experience of AEM specialists in the sphere of oil refining, chemical and power units. Vessel designs may be complemented with other elements depending on input technical requirements and process parameters as defined at design stage Types ofreactors Hydrotreate rs Reformers Isomerization reactors, Technical specifications Diameter: up to 5000 mm Nominal pressure: up to 20 MPa Wall thickness : up to 300 mm Design fluid temperature: up to 550C Material: single metal plated with corrosion resistant material, type 08�¥18�?10�¢, 0813, or other as required by technical design Internals UOP, AXENS, RIFING, etc. Service life : 30 years
Price of product ( USD price or FOB price) : 350$ Product origin : Turkey - Istanbul
Using as a alternative spare part for relevant machine. As Razor Spare Parts, we provide our business partners and buyers in the best way by offering many back services besides production. Our products can used easily for relevant machines and easy to operate. High guality production and with using life, Razor Spare Parts products separate other firm and companies. With the first-class productions of our target products in the spare part area, we offer services with the highest quality products as well as our competitors for atlas copco, furukawa and ingersoll rand spare parts We have services for part and the whole product. We are taking strong steps to strengthen our position in the industry and to be in the international market by offering service and solution suggestions to our customers and business partners for many products, especially atlas coppo, in hydraulic breakers and rock drilling equipment. Rotation_bushing_55025361, Rotation_bushing_55025361_TR, Rotation_bushing_55025361_sandvik, 55025361, 55025361_turkey, 55025361_TR, 55025361_best_price, 55025361_high_quality, 55025361_cheaper, 55025361_sandvik, 55025361_spare_part, 55025361_mining_machine, 55025361_drilling_machine, 55025361_razor_spare_part, 55025361_razorsparepart, drilling_blasting, sandvik_spare_parts mining_machine_spare_parts drilling_equipment hydraulic_drill_spare_parts , razor_spare_parts