Claening sponge ball use to clean concrete pipe. We can manuucturing different dimension for example outside diameter maybe 100 mm, 125 mm, 150 mm, 175 mm, 200 mm. Packing details will specify at order.
Gate valve, butterfly valve, check valve, strainer, filter, air release valve, ball valve, tilting valve..
Stone crusher, ball mill, belt conveyor, seperator, grinding plant, grinding equipment, dryer.
Ball valves, gate valves, butterfly valves, check valves, expansion joints, brass valves, api / ansi standard valves, hydrants, actuators.
This machine consists of a cabin, elevator, seperator, filter, turbines, cyclone and control panel. The materials for shotblasting are placed in a moveable role. The roles running speed is arranged by an electronical speed controller from 1m./min. To 10 m./min. To be able to make a good roughen to the material, steel ball and role speed must be arranged. The steel ball and the sand coming from the helix pour into the elevator and then goes into the seperator with bands and the buckets.The seperator makes the steel balls and the dust to be seperated. The seperated clean balls pour into the turbines again. The dust passes through the filter and air goes out with a fan.The machine is designed for 70 cm width stone. It’s lenght can be arranged. Areas to be used Floor covering and wall boards decorative sanding Marble figures and marble columns sandling Curbstone and outside floor covering sandling Granite and natural stones sandling Packing suitable to road transportation
Concrete pump spare parts, pistons, sealing elements, absorbers, mountings, cleaning balls, couplings, asphalt finischer, finisher pads, lying helix, mountings, spcial orders.
It is manufactured according to the ECR 67-01 standards. It lets the gas inside the tank to enter or exit for storage or usage purposes. By its coiled structure, it cuts the gas from the tank when the car is stopped. It is designed by using European Orings. Moreover, the multivalve ball is an imported part. All of our products have 2 years of warranty and 7/24 of online service.
Feature 1. Machined from solid steel bar stock for durability. 2. These series employs a threaded sleeve locking mechanism, mates with matching male threads on the nipple. The two halves must be manually threaded together for connection. 3. Hard, chrome alloy balls are used for valving. They are spring loaded. 4. The valve provides a metal-to-metal seal between the ball and coined seat. 5. The interface seal is polyurethane which resists high pressure extrusion. 6. A threaded valve retainer provides a valve stop that assures positive valve alignment. Specifications 1. Material: Carbon Steel 2. Standard seal material: NBR (other material is available on request) 3.Temperature Range (STD seals): -20℃ to +80℃ Applications- This series bring to the industry a proven sensing for use on 1. construction equipment 2. orestry equipment 3. agricultural machinery 4. oil tools 5. steel mill machinery 6. other demanding hydraulic applications. wood box
Free vibrating screens are produced with 1,2,3,4 layers in every theoretically possible dimension. They are used to separate the broken material inside the plant. The capacity of the screen can vary depending on the size of the desired product. Free vibrating screens operate an average of 7 mm in width. Gradation and moisture of the material, which will be eliminated plays an important role in the capacity of the screen. Vibration-resistant ball bearings and eccentric shaft which is placed on the screen body are driven with eccentric weights at the both end of the shaft. There are ellipsoid vibration in the front and rear parts of the screen and a circular vibration in the middle parts of the screen. Vibrating body sits on the main frame through a sufficient number of heavy-duty helical springs.
We are reckoned among the successful Suppliers and Exporters of Fresh Strawberry. We offer a wide variety of Fresh Strawberries such as Honey, All star, American no.3, American no.6, American no.13,Camarossa, etc. In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of the Strawberries using advanced cold storage facilities. One can obtain the Strawberries at market-leading rates from us. Advantages : Style - Frozen Type - Strawberry Shape - Ball Freezing Process - IQF Preservation Process - IQF Cultivation Type - Common Packaging - Bulk Shelf Life - 18months Weight (kg) - 10 Color - RED Variety - Honey, All star, American no.3,American no.6, American no.13,Camarossa Product - Frozen Wild Strawberry
Manual Softening Point Apparatus (Ring and Ball Test Sets ) Product Code Product Description PRS-AS0130 Ring and Ball Test Set, 220-240 V 50-60 Hz PRS-AS0130/110 Ring and Ball Test Set, 110 V 60 Hz PRSTD-1410 Hot Plate with Magnetic Stirrer PRS-AS0131 Brass Ring, with Steel Ball and Ball Centering Guides, 2 pcs.each PRS-AS0132 Ring Holder and Assembly PRSGG-1330 Borosilicate Glass Beaker 600 ml PRSGT-1305 Glass Thermometer Max. 110°C PRSGT-1315 Glass Thermometer Max. 250°C PRSGT-2050 ASTM 15C Thermometer -2 +80°C (IP 6OC) PRSGT-2055 ASTM 16C Thermometer +30 + 200°C (IP 61C) STANDARDS : EN 1427; ASTM D36; AASHTO T53 PRS-AS0130 Ring and Ball Test Set, 220-240 V 50-60 Hz The PRS-AS0130 Ring and Ball Test Set is used for determining the softening point of bituminous materials by ring and ball method. If required, Glass Thermometer PRSGT-1305, PRSGT-1315, ASTM 15C or 16C Thermometer should be ordered separately. The Ring and Ball Test Set is supplied complete with; � Hot Plate with Magnetic Stirrer � Brass Rings, 2 pcs. � Ball Centering Guides, 2 pcs. � Thermometer, Temperature Sensor with Holder � Steel Balls, 9.5 mm dia., 2 pcs. � Ring Holder and Assembly � Borasilicate Glass Vessel Beaker 600ml Dimensions 280x400x200 mm (packed) Weight (approx.) 4 kg Power 650 W
Four Column Automatic Compression Testing Machines Product Code Product Description PRS-B5231 2000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz PRS-B5331 3000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz PRS-B5431 4000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz PRS-B5531 5000 kN Automatic Four Column Compression Testing Machine EN 220-240 V 50-60 Hz PRS-B0210 High Precision Pressure Transducer and Electronic PRS-B5231 and PRS-B5331 Testing Machine is supplied complete with; Ã? 205x90 mm, Ã? 205x50 mm and Ã? 205x30 mm distance pieces PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm. PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B5231 and PRS-B5331 testing machines. PRS-B5431 and PRS-B5531 Compression Testing Machines are supplied complete with; 2 pcs. Ã? 205x90 mm, 2 pcs. Ã? 205x50 mm and 2 pcs. Ã? 205x30 mm distance pieces PRS-B4513 Upper Platen (with ball seating assembly) Ã?300 mm, Lower Platen Ã?300 mm. PRS-B4510, PRS-4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4531 and PRS-B5531 Testing Machines
Product Code Product Description PRS-ZE0865 In-situ CBR Test Apparatus PRS-ZE0866 Cutting Collar (edge) for PRS-ZE0865 PRS-ZE0867 Conversion Frame STANDARDS : The PRS-ZE0865 -situ CBR Test Apparatus, 50 kN capacity,is used for the on-site determination of the bearing capacity of soils used in road construction. The set consists of: â?¢ 50 kN capacity mechanical jack with ball seating â?¢ 50 kN capacity load ring â?¢ Analog penetration dial gauge (30 mm travel x 0.01 mm) â?¢ Adjustable dial gauge holder â?¢ CBR Penetration piston â?¢ Set of extension rods (2 pcs. 102 mm, 1 pcs. 305 mm and 1 pcs. 610 mm length) â?¢ Datum bar assembly with two stands â?¢ 4.5 kg annular surcharge weight â?¢ 4.5 Kg slotted surcharge weight â?¢ 9 kg slotted surcharge weight â?¢ Vehicle bracket and wooden carrying case The PRS-ZE0867 Conversion Frame is used to convert the IN-situ CBR test to a mechanical laboratory CBR test machine. The system is easily assembled onto the conversion frame with the addition of some of the accessories included in PRS-ZE0865. The frame is used with the jack, load ring, CBR mould and penetration piston.
ParsRos Automatic Compression Testing Machines Product code PRS-B423 2000 kN Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz PRS-B6321 2000 kN Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz PRS-B6321/11 2000 kN Automatic Compression Testing Machine ASTM, 110 V 60 Hz PRS-B433 3000 kN Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz PRS-B63000 kN Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz PRS-B6331/110 3000 kN Automatic Compression Testing Machine ASTM, 110 V 60 Hz PRS-B0210 High Precision Pressure Transducer and Electronic PARSROS Automatic range of 2000 kN and 3000 kN capacity compression testing machines have been designed for reliable and consistent testing of a wide range of specimens. These compression testers are the results of continu¨ous research to upgrade the testing machines with the latest technologies to conform to the latest standards EN 12390-3, 12390- 4, BS 1881 and ASTM C39 in terms of its technical properties taking into account client requirements. These also meet the requirements of CE norms for the safety and health of the operator. The advantages of performing tests on computer with using PARSROS Software, such as reporting, graphical output, etc., PRS-B4321and PRS-B4331Testing Machine is supplied complete with; 205x90 mm, �? 205x50 mm and �? 205x30 mm distance pieces PRS-B4513 Upper Platen (with ball seating assembly) 300 mm, Lower Platen 300 mm. PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4321 and PRS-B4331 testing machines. PRS-B6321 and PRS-B6331 Compression Testing Machines are supplied complete with; 165x90 mm, 165x50 mm and 2 pcs. 165x30 mm distance pieces PRS-B4511 Upper Platen (with ball seating assembly) 165 mm, Lower Platen 165 mm. PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6321 and PRS-B6331 Compression Testing Machines. Safety Features Maximum pressure valves to avoid machine overloading Piston travel limit switch Emergency stop button Front and rear transparent durable plexiglas guards Software controlled maximum load value
Product Code Product Description PRS-B4221 2000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz PRS-B6221 2000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz PRS-B6221/110 2000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz PRS-B4321 3000 kN Semi-Automatic Compression Testing Machine EN, 220-240 V 50-60 Hz PRS-B6321 3000 kN Semi-Automatic Compression Testing Machine ASTM, 220-240 V 50-60 Hz PRS-B6321/110 3000 kN Semi-Automatic Compression Testing Machine ASTM, 110 V 60 Hz PRS-B0210 High Precision Pressure Transducer and Electronic PARSROS Semi-Automatic (Motorized) range of 2000 kN and 3000 kN capacity compression testing machines have been designed for re¬liable and consistent testing of a wide range of specimens. These compression testers are manufactured as a result of continuous research studies to upgrade the machines with the latest technologies to conform with the latest standards EN 12390-3, 12390-4, BS 1881 and ASTM C39 in terms of its tech¬nical properties taking into account the cli-ent requirements. PRS-B4221 and PRS-B4321Testing Machine is supplied complete with; � dia. 205x90 mm, dia 205x50 mm and dia 205x30 mm distance pieces � PRS-B4513 Upper Platen (with ball seating assembly) �300 mm, Lower Platen �300 mm. PRS-B4510, PRS-B4511, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B4221 and PRS-B4321 testing machines. PRS-B6221 and PRS-B6321 Compression Testing Machines are supplied complete with; � dia165x90 mm, dia 165x50 mm and 2 pcs � 165x30 mm distance pieces � PRS-B4511 Upper Platen (with ball seating assembly) �165 mm, Lower Platen �165 mm. PRS-B4510, PRS-B4512 and PRS-B4515 upper and lower platen sets can also be used with PRS-B6221 and PRS-B6321 Compression Testing Machines.
Product Code Product Description PRS-AS0120 Semi-Automatic Digital Bitumen Penetrometer 220-240 V 50-60 Hz PRS-AS0120/110 Semi-Automatic Digital Bitumen Penetrometer 110 V 60 Hz PRS-AS0121 Transfer Dish for PRS-AS0120 PRS-AS0122 Sample Cup, � 55x35 mm, stainless steel PRS-AS0123 Sample Cup, � 70x45 mm, stainless steel PRS-AS0124 Penetration Needle, 2,5 g PRS-AS0160 One-Quarter Scale Cone and Shaft, ASTM D 1403 and D 1831, for PRS-AS0120 and PRS-AS0126 PRS-AS0161 One-Half Scale Cone and Shaft, ASTM D 1403 and D 1831, for PRS-AS0120 and PRS-AS0126 PRS-AS0162 Penetrometer Cone ASTM D 217 (Optional Type) and ASTM D 937, for PRS-AS0120 and PRS-AS0126, Brass PRS-AS0165 Resilience Ball Penetration Tool. ASTM D5329, for PRS-AS0120 and PRS-AS0126 STANDARDS : EN 1426; ASTM D5; AASHTO T49 The PRS-AS0120 Semi-Automatic Digital Bitumen Penetrometer is used to determine the penetration of bituminous samples under constant load, time and temperature. The Penetrometer consists of a cast iron base with coarse and fine levelling screws, a digital penetration measurement gauge 0.01 mm readability and a penetration timer unit. Start button of the penetration timer unit is used to release the plunger fitted with the needle to start the 5 seconds test. A water bath (PRSGE-AS4000 or PRSGE-AS4050, 25±0,1 C) and a thermometer ( IP38, ASTM 17C or 63C ) required for the test should be ordered separately. The Semi-Automatic Digital Bitumen Penetrometer is supplied complete with; � Penetration Needle, 2,5g, 1 pieces � Transfer Dish � Sample Cup � 55x35 mm, 3 pieces, stainless steel Dimensions 200x300x500 mm Weight (approx.) 16 kg
PRS-EU8050 Electromechanical Universal Test Machine, 50 kN, 220-240V, 50-60Hz, 1 ph. PRS-EU8300 Electromechanical Universal Test Machine, 300 kN, 220-240V, 50-60Hz, 1 ph. PRS-EU8050, 50 kN and PRS-EU8300, 300 kN capacity fully automatic Electromechanical ParsRos Universal Testing Machines are multi purpose versatile machines which satisfy the requirement of R&D laboratories, university laboratories, institute laboratories and quality control laboratories for tensile, compression flexural tests under load or displacement control for a wide range of materials. PRS-EU8050 and PRS-EU8300 model Electromechanical Universal Testing Machines can be used for tensile test on any material i.e (metal, plastic, textile, wood) by using suitable accessories. Those machines can also be used for general compression, flexural, test on steel, soil, concrete, cement, asphalt and similar materials, by using suitable accessories. These Testing Machines consist of base containing the transmission components and holds two robust columns connected by upper cross head and digital graphics data acquisition and control system. The upper cross head can be adjusted to set the vertical test space for different tests. User can adjust the vertical test space by also lower crosshead moved by an electromechanical system with a single recirculating ball screw, powered by an servomotor. Advanced closed loop control system assures accurate load or displacement pace rate on sample. The load is measured by a load cell that located on upper crosshead and displacement is measured by an encoder fit to the servo motor on both models. The operator will have large flexibility during the test with advanced microprocessor control and material testing software installed on PC. The machine is supplied complete with high precision load cell. Gripping systems, extensometers and accessories are not included and have to be ordered separately.
Product Code Product Description PRS-CM6700 250 kN Cement Compression Frame PRS-CM6710 15/250 kN Cement Flexure/Compression Frame STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349;BS 3892-1, 4551-1 The PRS-CM6700 and PRS-CM6710 , very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimens. Load cells are used on both frames to provide high accuracy in load measuring. Both frames are fitted with round platens with 165 mm diameter and these should be used together with suitable flexure and compression devices. Distance pieces and transparent front-rear safety doors (should be factory insttalled ) should be ordered separately. Distance Pieces for Frame Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the distance between platens. Distance Pieces PRS-CM4630 Distance piece dia. 165 mm x 15 mm PRS-CM4631 Distance piece dia. 165 mm x 30 mm PRS-CM4633 Distance piece dia. 165 mm x 50 mm PRS-CM4634 Distance piece dia. 165 mm x 90 mm Platens PRS-CM0116 Upper Loading Platen with Ball Seating Assembly �:165 mm and Lower Loading Platen, �:165 mm Manufactured from high quality steel are hardened (more than HRC 53), smoothed and finished. The roughness value for the surface texture of machine and auxiliary platens are 3.2 μm. Loading Cylinder Assembly & Limit Switch All frames have a single acting up stroking ram. The diameter of piston changes with regard to the capacity. The maximum ram stroke is 50 mm, a limit switch is fitted to prevent over travel of the ram which cuts the power to the pump. There is a low friction coaxial PTFE seal between the cylinder and the piston fitted to the cylinder. Accessories PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms, ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2�) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN
Product Code Product Description PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz PRS-CM0116 Upper Loading Platen with Ball Seating Assembly 165 mm and Lower Loading Platen, 165 mm PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2â??) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator. Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are; Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure. Automatically saves the test parameters and test results. The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, an automatic hydraulic power pack with data acquisition and control system
Automatic Cement Compression & Flexure Testing Machines Product Code Product Description PRS-CM6331 250 kN Automatic Cement Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6331 /110 250 kN Automatic Cement Compression Testing Machine 110 V 60 Hz PRS-CM6431 15/250 kN Automatic Cement Flexure/Compression Testing Machine 220-240 V 50-60 Hz PRS-CM6431 /110 15/250 kN Automatic Cement Flexure/Compression Testing Machine 110 V 60 Hz PRS-CM0116 Upper Loading Platen with Ball Seating Assembly :165 mm and Lower Loading Platen,:165 mm PRS-CM0120/A Flexure Jig Assembly to test 40x40x160 mm mortar prisms,ASTM PRS-CM0120/E Flexure Jig Assembly to test 40x40x160 mm mortar prisms, EN PRS-CM0121/A Compression Jig Assembly to test 50 mm (2) mortar cubes, ASTM PRS-CM0121/E Compression Jig Assembly to test portions of 40x40x160 mm mortar prisms, EN PRS-CM0122 Compression Jig Assembly BS, to test 70,7 mm mortar cubes STANDARDS : EN 196-1, 459-2, 1015-11, 13454-2; ASTM C109, C348, C349; BS 3892-1, 4551-1 The PARSROS Automatic range of single testing chamber and double testing chamber compression and flexure testing machines have been designed for reliable and consistent testing of mortar samples. These compression and flexure testers are the results of continuous applications and research studies to upgrade the machines with the latest technologies and conform the current standards EN 196-1, 459-2, 1015-11, 13454- 2; ASTM C 109, C348, C349 and BS 3892-1, 4551-1 in terms of its technical properties taking into account client requirements by using suitable accessories. These machines also meet the requirements of CE norms for safety and health of the operator. Compression and flexture jigs, distance pieces, and also removable transparent front-rear safety doors (should be factory installed) should be ordered separately. The PARSROS automatic cement compression and flexure testing machines allow less experienced operators to perform the tests. Once the machine has been switched on and the specimen is positioned and centered by the help of centering apparatus. The only required operations are; â?¢ Setting test parameters, including pace rate (only required when the specimen type is changed.) Choosing the compression or flexure frame by using the changeover valve. Pressing the START button on the control unit. The machine automatically starts the rapid approach; switches the test speed after 1% of the load capacity of the machine and stops once the specimen failure. Automatically saves the test parameters and test results. The PARSROS automatic cement compression and flexure testing machines consist of very rigid two column single or double chamber frames, automatic hydraulic power pack with data acquisition and control system
