Explorer30 is the small hydraulic drill rig for coring and drilling for narrow tunnels, underground galleries and surface. It has small built so that easy to install and carry. It has hydraulic regulated spindle to control speed of rotation between 350 rpm to 2200 rpm step less. It can be operated with one person. It can be designed either with electrical engine or diesel engine. The rotation head can be swung aside for hole cleaning or grouting equipment. Explorer30 has automatic hydraulic synchronization system between chuck and rod holder to handle the rods.
Rocker34 is designed for drilling blast holes with dth hammer. Rocker34 has crawler for the difficult ground conditions, strong construction, easy maneuver capability.
MAST AND FEED SYSTEMFeed Length4,1 m13 ft
Feeding Force0 - 27 kN
Pulling Force47,5 kN
Drilling Angle22° - 90°
POWER UNITBrandDEUTZ
TypeF4L912
Number of Cylinder4 cylinders
Cylinder Volume3,7 lt
Power51 kW - 70 Hp
Rev.2300 rpm
Engine TypeDiesel
CoolerAir
HYDRAULIC SYSTEMFirst Pump160 bar27 cc /rev.
Second Pump130 bar19 cc / rev.
Auxiliary Pump180 bar19 cc / rev.
Hydraulic Oil CoolerAir2024 K - 0,110 kW - 12 V
ROTARY UNITSpeed133 rpm
Toruque1185 Nm
SUPPORT JACKSMovement UnitTrack / max speed 2,9 km/h
Leverages of Jacks2 units of Hydraulic Leverages
Cylinder Stroke150 mm
m
Weight2.830 kg
STANDARDS : EN 196-3,ASTM C187-C191,AASHTO T129-T131,BS 4550
Movements along X Y Z axes
Up to 30 different test types may be programmed and over 1000 tests may be memorized. PC Port
Initial and fi nal setting time (in 0.1 mm)
Automatic cleaning of the needle
Automatic stop and storage of measurements for up to 50 tests
Plunger for initial consistency
Thermostatic baths (optional)
Display for data input and diagram/test report
Printer for final test report and diagram
RS 232 serial port for PC connection
Moulds and further needles have to be ordered separately, according to the various standards
Power supply: 220 V, 50 Hz, single phase
Dimensions: 355 x 620 x 580 mm Weight: 40 kg.
PVC House Entrance Doors are available both in 70mm and 58mm systems.
- 3D Hinges
- Hook Lock or 5-Point Lock
- Edge Reinforcing
- Thermal isolated Thresholds
- Tube Steel
- incl. door Panel.
PVC Door Panels to be installed in PVC doors.
-Thermoformed or Flat Panels with stainless steel application
- 24mm or 32mm thickness
- PVC Sheets of Kömmerling and Veka
- over 100 different models with special designed glasses.
Self travelling of 4 x 4 in job site,
60 cbm concrete pump,
140 hp euro4 diesel engine,
18 m hydraulic boom with radio remote control,
Automatic lubrication,
High pressure washing.
Length5, 00 m
Stroke4, 10 m
Push force0 - 25 kn
Pull force50 kn
Drilling
Drill speed0 - 120 cm/min (it may change due to ground.)
Drilling diameter2, 5'' - 4'' / 63 mm - 102 mm
Drilling depth50 m
Rotation unit
Drive engine75 rpm
Torque1000 nm
Oil cooler2024k – 0, 110kw – 12v
Fuel tank capacity70 liters
Oil tank capacity250 liters
Advantages
Vdd5 has hydraulic pull and push force.
Vdd5 works with dth hammer.
Vdd5 is moving with 3 wheel hydraulic traction.
Vdd5 can be controlled with electrical joystick.
Three wheel traction system of vdd 5 can be chosen as demanded. (only front, only back or free)
Vdd5 is manufactured with high quality materials to maintain power and lifetime.
Vdd5 provides easier and faster drilling with enhanced pull and push force and rotation.
Vdd5 has a large volume of oil tank and oil cooler; therefore, the oil is used more efficient and long time.
Vdd5 can drill 76, 89, and 100 mm of hole sizes.
Vdd5 can drill with giving from 22 degrees to 90 degrees of drilling position.
Vdd5's drilling vibration is minimized with the help of balancing pistons.
It is a hydraulic system, automatic, PLC controlling machine which also includes concrete batching plant has a pressure bar between 100-160 bars, it is a machine which produces 36 interlocks in one press.
Packing of the dried products which are ready to be picked up is made automatically by automatic picking robot. For this reason the products which are dried should be dried more so the quoantity of the wooden palet should be taken according to this point. You have an option to move in the system by forklifts or automatic robots. At the same time you can use the batching plant part both for dry mortar and wet mortar.
Fast service, spare parts guarantee
Appropriate material usage in the norms of din and tsek
Standards
Easy usable program selection
Auto/manuel choice
Authorization certificate at the end of training period
Stop, standby and continue production from the point where was left.
Forklift usage option
Troubleshooting over the internet option 2 years mechanical parts guaranteed
Technical specifications
Vibration impact force: 24000 kg
Vibration power: 32 kw
Vibration cooling capacity: 11000 m3/h
Hydraulic cooling capacity: 120 lt/min
Pump power: 22 kw
Robot pump power: 11 kw
Picking robot motor power: 15 kw
Machine size: 2, 1 x 8, 5 x 2, 5 m
Plc ----------- contactor: moeller thermic : moeller sýemens touch screen
Interlock paver mould: oxygen cutting and cnc processing
Thick mortar bunker: 3 kw
Thin mortar bunker: 3 kw
Material transport band: 7, 5 kw
Distributor between mixers: 1, 5 kw
Bs1000 mixer: mixing capacity: 1000 dm3 44 kw
Bs250 mixer: mixing capacity: 250 dm3 11 kw
Material sand bunker: 15 m3 x 3 veya 4 pcs.
Material weighing band: 5, 5 kw
Thick mortar cement weighing volume: 600 kg
Thin mortar cement weighing volume: 300 kg
Cement silo 50 tons: filter: 24 m2 wam , safety valve : wam
Cement screw 8m: motor power : 4 kw, tube diameter : 219 mm
Water weighing scale: 300 kg.
Technical data of the machine
Working area dimension 2350 x 1250 x 60 mm.
Maximum pressure 210 ton – 6 kg / cm¦
Surface pressure 160 ton – 5 kg / cm¦
Gradual pressure characteristics Electronic
Vacuum pressure 28 ton – 750 milibar
Vacuum capacity 100 m¦/h
Vacuum motor power 3 kw – 1400 rpm (2 motors)
Pressing motor characteristics 1.1 kw – 2800 rpm
Resistance heating power 18 x 1000 w
Air resistance 4 x 1000 w
Air pressure 6 bar
Total power 30 kw, 380v , 50hz
Machine body dimensions 2000 (w) x 2020 (h) x 2900(l)
Pressing plate dimensions 1700 (w) x 1090 (h) x 3350(l)
Machine’s total weight 5 ton
Traditional Turkish Hand Crafts has formed a rich mosaic by bringing together its genuine values with the cultural heritage of the different civilizations which were coming from the thousand years of history of the Anatolia.
The handicrafts made with copper, as well as the metals such as brass, gold, silver, are tried to be kept alive today by using high quality workmanship and various designs.
Turkish Coffee is the name given to a type of coffee whose preparation and brewing techniques were invented by the Turks. It has a unique taste, froth, aroma, brewing technique and presentationà in other words it has its own identity and tradition.
The first coffee was made in the Arabian Peninsula by boiling coffee cherries. The new method invented by the Turks revealed coffee's true flavour and peerless aroma. The Turks introduced coffee to Europe where for many years it was prepared and consumed as Turkish Coffee.
Turkish Coffee is made from high quality arabica coffee beans from Central America and Brazil that are blended and carefully roasted, then very finely ground. The coffee is mixed with water and the desired amount of sugar and cooked in a "cevze", or Turkish coffeepot. The coffee is served in small cups. The coffee must be left to stand for a short time after serving to allow the grounds to settle at the bottom of the cup.
Love, success, money, fortune: the art of reading coffee grounds is as old as coffee itself. Coffee fortune telling was born out of Turkish Coffee and is an inseparable part of the pleasure and conversation associated with coffee.
This ritual spread to Europe at the end of the 17th century when it became fashionable in Paris, from where it spread to Austria, Hungary and Germany. The Coffee Set made of copper is a modernized version of traditional offer.
