Rocker 34 Wagon Drill

Vdd5 wagon drill rig (rubber whell driller) Technical characteristics General information Engine38 kw Weight2180 kg Feed frame Length5, 00 m Stroke4, 10 m Push force0 - 25 kn Pull force50 kn Drilling Drill speed0 - 120 cm/min (it may change due to ground.) Drilling diameter2, 5'' - 4'' / 63 mm - 102 mm Drilling depth50 m Rotation unit Drive engine75 rpm Torque1000 nm Oil cooler2024k – 0, 110kw – 12v Fuel tank capacity70 liters Oil tank capacity250 liters Advantages Vdd5 has hydraulic pull and push force. Vdd5 works with dth hammer. Vdd5 is moving with 3 wheel hydraulic traction. Vdd5 can be controlled with electrical joystick. Three wheel traction system of vdd 5 can be chosen as demanded. (only front, only back or free) Vdd5 is manufactured with high quality materials to maintain power and lifetime. Vdd5 provides easier and faster drilling with enhanced pull and push force and rotation. Vdd5 has a large volume of oil tank and oil cooler; therefore, the oil is used more efficient and long time. Vdd5 can drill 76, 89, and 100 mm of hole sizes. Vdd5 can drill with giving from 22 degrees to 90 degrees of drilling position. Vdd5's drilling vibration is minimized with the help of balancing pistons. Özanadolu sitesi 682. Sokak no: 25-27 Ývogsan-ankara-turkey tel: +90 312 394 47 24 faks: +90 312 395 62 07

Wagon Drill Rig

Wagon Drilling Rig : PWD - Model, Top drive DTH drill rig is capable of drilling in different formations such as Hard Rock by DTH.

Material of rod body: geological alloy pipe Material of connector: first-class alloy constructional steel Craft: thermal refining in vacuum, which greatly improves the fatigue resistance and shearing strength. Rod body craft: friction welding, which improves the bending strength, the firmness of the drill rod as well as the lifetime.

Supplier: Crawler drill, wagon drills, slim drill for drilling in marble & granite quarries & light weight inwell rig for blasting and water well purposes

Supplier: Water well drilling equipment: inwell drilling rigs, truck mounted dth/rotary cum dth drilling rigs, dth hammers, button bits, drill rods, pneumatic motors, construction & quarrying equipment: slim drill, line driller, quarry master, trimmer, hand grout pump, wagon drill & rail mounted angle drilling machine, piling machine, mining equipment: wagon drills, crawler mounted blast hole drills, roof bolting machines, cable bolting machines, hydraulically operated water sprinkling systems & universal drilling machines, core drills: skid mounted, tractor mounted, truck mounted and crawler mounted core drills

Rock drill yt28 The rock drill is a kind of high efficiency air leg rock drill machinery. It is mainly used for blasting holes and other drilling works in a Quarries, railway construction, water conservancy construction and Defence project facility. It is suitable for drilling and blasting under various of rocks at Any direction angles.Blast hole dia is 34-42mm, drill hole depth is 5 m. This machine may match with model ft160bd short air leg or model Ft160bc long air leg. This machine has transparent surface of fy200b oil reservoir to Regulate oil. Specification Weight + 26 kg Length 661mm Cylinder dia 80mm Piston stroke 60mm Air pressure 0.4- 0.63mpa Impact frequencey ª 37hz Air consumption _81l/s Air pipe (inner dia ) 25mm Water pipe (inner dia ) 13mm

The rock drill is a kind of high efficiency air leg rock drill machinery. It is mainly used for diging into mine laneway and blasting holes in all drilling works. It is indispensably importance machine tool in metallurgy, coal, railway, traffic, water conservancy construction and national defence stone project. It is suitable for drilling and blasting under various of rocks at any direction angles. Blast hole dia is 34-42mm,drill hole depth is 5 m This machine may match with Model FT160BD short air leg or Model FT160BC long air leg. This machine has transparent surface of FY200B oil reservoir, easy to observe the oil lever, adjust oil quantity, ensure the well lubricated. Wooden case

Model Z3032 x 7 Drilling capacityú¿mm) 32 Max.tapping dia.(mm) M16 Distance spindle axis to column generating line(mm) 300-700 Columm diameterú¿mmú¬ 150 Spindle taper MT3 Spindle travelú¿mm) 150 Spindle speed range(50Hz)(RíñPíñM) 100-1600 Spindle speed serier 8 Rotary angle of rocker in hirizontable plane(íp) 360 Distance between spindle nose to working(mm) spindle of base(mm) 275-680 Dimension of worktableú¿mmú¬ 250í-250í-250 Dimension of baseú¿mmú¬ 1050í-550í-120 Motor(kw) 0.75 or 1.1 N.G./G.W.(kg) 380/475 Packing dimension(cm) 122í-61í-138 In cartons or wooden cases The dimension is 122X61X138mm