I2C CF Dot Matrix Calibrator for iPhone X-14 Pro Max dot projector lattice alignment. I2C 19 in 1 dot matrix calibrator for iPhone X-14 Pro Max Face ID repair. I2C 15 in 1 dot matrix calibrator for iPhone X-13 PRO Max Face ID repair. i2C CF dot projector calibrator fixture for iPhone X/XS/XS Max/XR/11/11 Pro/11 Pro Max/12 Mini/12/12 Pro/12 Pro Max/13 Mini/13/13 Pro/13 Pro Max/14/14 Plus/14 Pro/14 Pro Max Face ID Repair.
Option:
1. i2c CF 15-IN-1 Calibrator fixture for iPhone X-13 Pro Max.
2. i2c CF 19-IN-1 Calibrator fixture for iPhone X-13 Pro Max.
Features:
1. Built-in strong magnetic adsorption and precise calibration make facial maintenance more efficient.
2. 15-in-1/19-in-1 calibrator fixture refuses to be cumbersome, and all models can be handled in one. 2 seconds alignment 5 seconds repair, new alignment locking design, maintenance success rate reaches 99%.
3. Support iPhone X-14 Pro Max. Air avoidance design, strong magnetic adsorption and 360â?? rotary buckle.
4. Acrylic high hardness transparent base, transparent and unobstructed, more convenient for alignment.
5. Dot matrix alignment artifact, no need to align by feeling, one base is suitable for 19 models.
i2C Dot Matrix extension test cable for iPhone 12-14 Pro Max Face ID repair. i2C iPad12X dot matrix extension flex cable iPhone 12/13/14 series Face ID repair transfer cable for I2C i6S/Face-14/V8I programmer.
Repair face problem is the original face problem to repair, can not transfer another motherboard face directly to the new motherboard. Repairing faces is a highly technical job that requires face IC replacement and programming.
Option:
1. i2C Dot Matrix Extension Test Cable For iPhone 12/12mini/12 Pro/12 Pro Max(Connect iPad A12X).
2. i2C Dot Matrix Extension Test Cable For iPhone 13/13mini/13 Pro/13 Pro Max(Connect iPad A12X).
3. i2C Dot Matrix Extension Test Cable For iPhone 14/14 Plus/14 Pro/14 Pro Max(Connect iPad A12X).
4. i2C Dot Matrix Extension Test Cable For iPhone 14 Pro/14 Pro Max(Connect iPad A12X).
JC Dot Matrix cable for iPhone X-13 Pro Max Face ID repair. JC Dot Matrix Flex Cable is used to repair iPhone Face ID lower/higher issues. JC dot projector lattice IC chip for iPhone 13/13Pro/13 Pro Max/13 mini face ID repair. JC Dot projector flex cable used with JC Pro1000s Dot Matrix Module or JC V1S dot projector board.
JC Face ID Dot Flex Cable For iPhone X/XS/XS MAX/11/11PRO/11 Pro Max/12/12Pro/12 Pro Max/12 Mini/13/13Pro/13 Pro Max/13 mini.
JC dot matrix flex cable full set 13pcs(X-1 Pro Max):
1x JC dot matrix flex cable for iPhone X.
1x JC dot matrix flex cable for iPhone XS.
1x JC dot matrix flex cable for iPhone XS MAX.
1x JC dot matrix flex cable for iPhone XR.
1x JC dot matrix flex cable for iPhone 11.
1x JC dot matrix flex cable for iPhone 11 Pro.
1x JC dot matrix flex cable for iPhone 11 Pro Max.
1x JC dot matrix flex cable for iPhone 12/12 Pro.
1x JC dot matrix flex cable for iPhone 12 Pro Max.
1x JC dot matrix flex cable for iPhone 12 Mini.
1x JC dot matrix flex cable for iPhone 13.
1x JC dot matrix flex cable for iPhone 13 mini.
1x JC dot matrix flex cable for iPhone 13 Pro/13 Pro Max.
iPhone Face ID infrared flex cable only, iPhone front infrared camera flex cable For iPhone X/XS/XS Max/11/11pro/11Pro Max, iPhone Infrared Flex Cable for replacing damaged iPhone face ID infrared flex cable.
Face ID Front Camera Infrared Flex Cable for iPhone X/XS/XS MAX/11/11 Pro/11 Pro Max
Model:
X/XS: iPhone X/XS Infrared Camera Flex Cable only
XS Max: iPhone XS Max Infrared Camera Flex Cable only
XR: iPhone XR Infrared Camera Flex Cable only
11: iPhone 11 Infrared Camera Flex Cable only
11 Pro: iPhone 11 Pro Infrared Camera Flex Cable only
11 Pro Max: iPhone 11 Pro Max Infrared Camera Flex Cable only
Note:
1. Please choose the right model.
2. Professional skills and special repair tools are required for replacing iPhone flex cable.
3. China Phonefix is not responsible for any damage caused during installation and after use.
Package list:
1X iPhone Infrared Camera Flex Cable(cable only).
14875 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
QianLi ToolPlus lattice face precision calibrator for iPhone X/XR/XS/XS Max front camera repair, Qianli dot projector precision calibrator for iPhone X/XR/XS/XS Max repair.
Please: Don't press by force.
Product Features :
Fast fix
Multi-model adaptation
High hardness aluminum alloy
Auxiliary fit and precise alignment
Note : Only calibrator, no flex cable.
Magico iFace tool face dot matrix projection repair detector for iPhone X XR XS Max 11 Pro Max Face ID repair tools, Dot Projector Programmer and dot matrix flex cable for iPhone Face ID ''higher'' ''lower'' repair. Magico iFace Tool Dot Projector Programmer For iPhone X-11 Pro Face ID ''Higher'' ''Lower'' Repair.
Package Features:
Solve Face ID Not-working Problems: â??Move iPhone a little lower/higherâ??, â??Face ID is Not Availableâ??, â??Face Not Recognizedâ??, â??Unable to activate Face ID on this iPhoneâ??, etc.
Support Face ID Fusion, Offline Data Read & Write, Program Burning & Erasion; with Free Update!
Support Offline, Power-Off & PC-free Data Saving!
3rd Generation FPC! Low Energy Consumption! No Power Leakage!
Flex Cable Support Model :
For iPhone X
For iPhone XR
For iPhone XS
For iPhone XS Max
For iPhone 11
For iPhone 11 Pro
For iPhone 11 Pro Max
For iPad 12
WL Face ID repair fixture for iPhone X-11 Pro Max dot matrix reballing soldering repair. WL Face ID dot projector infrared camera flood fixture for iPhone X-11 Pro Max. WL Face ID repair fixture for iPhone X-11 Pro Max dot matrix reballing soldering repair. WL Face ID dot projector infrared camera flood fixture for iPhone X-11 Pro Max.
Product Features:
Support for iPhone X - 11 Pro Max.
Accurate positioning.
Tin planting platform.
Imported synthetic stone.
High temperature resistant imitation static electricity.
WY Dot Matrix Lattice alignment flex cable for for iPhone X /XS /XS max XR 11 11Pro/Pro Max 12/ 12Pro/ 12 Pro Max Face ID Testing Repair. WL alignment axis extension face lattice maintenance repair cable.
Product Features :
After the lattice repair is completed, there is no need to apply glue. The extended cable can cooperate with the fixture to test the face in advance, and then paste the glue to achieve 99% perfect alignment of the lattice.
In the process of face maintenance, there is a common problem: the deformation of the fixed iron frame of lattice and infrared leads to the failure of face entry (referred to as shaft adjustment).
The wire arrangement can be extended to the top of the machine to facilitate shaft adjustment.
Package Includes :
1pcs x Dot Matrix Extension Cable
WY Dot Matrix Lattice alignment flex cable for for iPhone X /XS /XS max XR 11 11Pro/Pro Max 12/ 12Pro/ 12 Pro Max Face ID Testing Repair. WL alignment axis extension face lattice maintenance repair cable.
Product Features :
After the lattice repair is completed, there is no need to apply glue. The extended cable can cooperate with the fixture to test the face in advance, and then paste the glue to achieve 99% perfect alignment of the lattice.
In the process of face maintenance, there is a common problem: the deformation of the fixed iron frame of lattice and infrared leads to the failure of face entry (referred to as shaft adjustment).
The wire arrangement can be extended to the top of the machine to facilitate shaft adjustment.
Package Includes :
1pcs x Dot Matrix Extension Cable
Luban Tool T1 lattice repair Face ID holder iPhone X-11 Pro Max small camera repair tools, LuBan T1 front camera face dot matrix repair fixture lattice holder tool for iPhone X / XS / XS MAX / 11 / 11 Pro / 11 Pro Max
LuBan T1 iPhone Front Facing Camera Fixture for Dot Projector Repair
Product Specification :
Brand: Luban
Model: LuBan T1
Application: Hold the Face ID module for shielding cover removing and part separation
Support models: For iPhone X/XS/XS Max/11/11 Pro/11 Pro Max
Package includes :
1pcs x Small Camera Repair Fixture
ISOFT IS-001 IS-002 HW Full Series of Chrysanthemum Engineering Cable, 1.0 Engineering line, Fast charging, Data transmission, Type-C interface Support Hongmeng/ Kirin chrysanthemum engineering line.
Features:
1. Bold pure copper wire, Each set of wires uses thickened pure copper wire, Pure copper copper core. Tinned copper core. Inner insulation., TPE protects the outer quilt, and Skin feel TPF material.
2. One-click engineering mode. Press the button to force the USB1.0 port to start the engineering mode.
3. Fast charging data transmission. It can be used as a normal data line without any operation.
4. Type-C interface. Full line length: about 100cm
5. Support HW full series/Kirin chip/Hongmeng system, suitable for Kirin810/ Kirin820/Kirin980/ Kirin985/ Kirin990.
6. Soft rubber edging. Soft and elastic, will not crack or change color for a long time, feel silky smooth, not entangled or knotted.
Function:
Support iP 5S-11 Pro Max/iPad full automatic recovery mode!
Support iP/iPod/iPad motherboard into recovery (flash)mode, solve the problem of touch failure, key fault lead to iPhone can not enter the flash mode!
Can access to iTunes, Ace, iTool, hourglass software!
Read serial number, ECID, hardware model and other information!
Test of mobile phone U2!
Original ICFRIEND Mipi Nb Max box + UFS 4 in 1 Socket UFS BGA 153,UFS 254,UFS 297 Adapter + E-MATE eMMC 13 in 1 Adapter. MiPi NB-Max is a tool intended for reading and writing user data on UFS and eMMC chips.
LuBan Intelligent Repair Instrument L3mini matrix tester dot projector tester for iPhone iPhone X/XR/XS/XS MAX/11/11P/11 PM/ 12/12 P/12 PM/13/13 Mini/13 Pro/13Pro Max face ID test repair tools, quick diagnosis face ID test repair machine for iPhone iPad repair, LB iFace Pro dot matrix tester for iPhone face ID diagnosis repair, LB iFace face dot matrix repair tester support for iPhone X/XR/XS/XS MAX/11/11P/11 PM/ 12/12 P/12 PM/13/13 Mini/13 Pro/13Pro Max motherboard diagnosis repair
LuBan Intelligent Repair Instrument L3mini Dot Matrix Projector Restoration Tester For iPhone iPhone X/XR/XS/XS MAX/11/11P/11 PM/ 12/12 P/12 PM/13/13 Mini/13 Pro/13Pro Max Face ID Diagnosis Repair
Product Features :
Support to check if the face dot matrix
It is normal, and the functions like fuse,
NTC disconnected, I2C disconnected,
Short circuit etc.
Read the data of Dot projector, Support: X - 13Pro Max / iPad A12
Support dot matrix encrypted data read & backup,
the burning function will be opened in future.
Qianli Universal Dot Matrix Repair Fixture for iphone X XS XSMAX 11 12Pro Max Face ID Repair
Qianli Face ID Dot Projector Repair Holder.
Product Features :
Made of high quality durable material.
Special dot projector fixture.
Universal perfectly assemble flex of dot projector.
Unique flex cables groove design.
Anti-scalding.
Unique light design, helps to position DOE
Dot Projector / Ttrue tone laser reballing stencils.
Used to easily repair the Face ID of iPhone.
Specially designed for iPhone X / XS / XS Max / XR / 11 / 11 Pro / 11 Pro Max / 12 Mini / 12 / 12 Pro / 12 Pro Max.
MECHANIC Dot Matrix repair tools set for iPhone X XS MAX 11 PRO MAX Face ID not working repair, suit for dot matrix for face ID soldering repair, solving broken dot projector of iPhone phones, no-record face, the perfect repair tools set for iPhone XS Face ID repair special soldering paste
Mechanic Dot Matrix Repair Tools Set For iPhone X XS XS MAX 11 PRO MAX 11 PRO 11 Face ID Repair
Product Features :
Pen-type pressing, sensitive contact switch, small and flexible, comfortable to hold.
Universal high temperature resistant synthetic stone microscope base, pressured of sinking clips design, Precise positioning with clamping.
Special soldering paste, A touch instant soldering, plump solder point, no reside, fast curing.
Fast curing glue, help repair Dot projector for Face ID efficiently
It is specially used for the soldering and reflow of the Dot projector for Face ID, effectively preventing the oxidation process and improving the mainboard's welding quality of the Dot projector for Face ID
Grinding pen, suitable for repairing IC chips, grinding, cutting motherboard, bracket, removing screws, etc. without damaging the surface of components.
Application: Suit for dot projector for phone face ID soldering.
Solving broken dot projector, no-record face, perfect repair Face ID.
Compatible models : iPhone X / XS / XS MAX / 11 / 11 PRO /11 PRO MAX
Package includes :
1pcs x Magnetic Fixture FID
1pcs x Face ID stencil iTin 48
1pcs x IC Polish Tool IRX
1pcs x 3ML Dot Projector Special Soldering Paste DT1
1pcs x 10ML Dot Projector Special Glue OK7
1pcs x 10cc Dot Projector Special Flux DW136
K-816 7 inch 270W 220V Constant Temperature Heating Platform for BGA Preheating Station BGA Reballing and Electric and Industrial Heater for Phone Repair
Application :
Used to divide, repair cell phone screen, LED display, Component heating work, SMD re-engineering work,PCB removing, soldering work
Preheating PCB board to 120â?? in fast speed, Preheating phone Screen to 80 in fast speed, also for Electric and industrial Heater.
Specifications :
Power: 270W 220V AC
Temperature: 80 / 120
Hydrogel film cutting knife head for Sunshine SS-890C cutting machine, Hydrogel film cutter head replacement part suitable for Sunshine SS-890C film cutting machine, it's used for cutting mobile phone front glass back cover film.
Hydrogel Film Cutting Head Knife Blade For Sunshine SS-890C Cutting Machine
Product Features :
Imported high precision industrial grade cutting head
Imported cutting head / precision cutting / APP smart operation
Suitable for mobile phone front / rear film, watch, AirPods, camera, iPad, ect...
Retractable, disassembled, replaced, fine aperture, durable, physically adjustable cutting head under pressure
The perfect combination of cutting precision and model data makes the finished films and fit perfectly with the mobile phone
Cutter head installation and replacement :
Prepare a new knife needle and unscrew the knife needle clamp.
After unscrewing, take out the cutter head.
Press the knife needle and carefully remove the knife needle.
Replace with a new knife needle.
Adjust the knife needle to the middle of 2-3.
Tighten the knife needle clamp (check if the holder is fixed, if not, tighten it).
Package Includes :
Option 1: 1pc Cutter Head
Option 2: 2pcs Cutter Head
Option 3: 3pcs Cutter Head
QIANLI MEGA-IDEA Clone DZ03 Face ID Dot Matrix Programmer No dismantling repair instrument for iPhone X to 14 Pro Max face ID repair.
Features:
Clone-DZ03 programmer, repair face ID as easily as repair accessories, even a piece of cake for new beginners.
Simple, as long as you know how to disassemble your phone.
No difficulty, beginners can also repair FACE ID.
Easy, repair the Id FACE as easily as changing accessories.
Support a variety of flex cables with unlimited expansion.
Support iPhone X/11/12 series flex cables, and other models will keep updating.
Package includes:
1 x DZ03 Standard set: Host+Dot Matrix Module+battery Test Module
1 x Clone-DZ03 Host:Host+Dot Matrix Module
1 x Dot Matrix Flex Cable(Optional)
Programmer QIANLI MEGA-IDEA Clone DZ03 Dot Matrix Repair Instrument
Note: The flat cable supports IP X series, 11 series, 12 series, and other models are continuously updated. The flat cable is generally MEGA-IDEA, QIANLI device, QIANLI device (iCopy, Apollo, iD Face, etc.)
Usage:
1. Download MEGA-IDEA computer software.
2. Plug the MEGA-IDEA Clone-DZ03 programming host into the dot-matrix activation board, connect the computer software "Megalda Assistant", and connect the matching power adapter to the DC interface on the activation board.
3. Connect the mobile phone to the computer, button the dot matrix module on the activation board and click to activate (at the same time, the dot matrix data will be backed up through the unique code of the mobile phone).
4. Remove the dot matrix module, buckle the corresponding type of flat cable, and write it into the bottom layer of flat cable data.
5. The flat cable is connected with the dot matrix module, and then connected to the programmer for testing. The data display is normal, and the face is successfully repaired after being loaded into the mobile phone.
RF4 RF-PEACE Built-in Vacuum Pump Powerful LCD Separator Machine Kit LCD Display Super Suction for Mobile Phone Repair Refurbishment.
Features:
Easy to operate, semi-automatic separating, Build-in air Vacuum Pump, low noise, no need clamps;
Safety power system inside, avoiding the electric leakage problem;
Anti-static body material, prevent the LCD and the flex cable being damaged from the static;
Power supply: AC 110 V to AC 220 V 50 Hz, universal for all over the world;
Temperature should be set to 80 centigrade to 100 centigrade;
Large heating platform, compatible for LCD or LED screen assembly
14875 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
